Performance Characteristi cs

Bandwidth 60 MHz

Real time sample rate 400 MSa/s

(2 channels interleaved)

Channels 2

Display 5.7 inch (145 mm) diagonal

Color LCD

Rise Time <5.83 ns

Record Length 4000 points

Vertical Resolution 8 bits

Vertical Sensitivity 2 mV - 5 V/div

DC gain accuracy ±3.0 %

Maximum Input Voltage 400 Vpk, CAT II (between signal and reference

BNC connector)

Position Range ± 8 divisions from center of screen

Bandwidth Limit 20 MHz

Time Base range 2.5 ns/div - 50 s/div

Timebase accuracy 100 ppm

Input Coupling AC, DC, GND

Input Impedance 1 MΩ in parallel with19 pf

Vertical and Horizontal Zoom Vertically or horizontally expand or compress a live

or stopped waveform

I/O interface USB host port on front panel supports USB flash

drives. USB device port for connection to PC

(Requires included Comsoft Software for use)

Acquisi tion Modes

Sample Display sample data only

Peak Detect

Average Waveform averaged, selectable from

2, 4, 16, 32, 64, 128, 256

Roll Mode For time base settings 500 ms/div-50 s/div

Trigger System

Trigger Types Edge, Pulse Width, Video*

Trigger Modes Auto, Normal, Single

Trigger Coupling AC, DC, LF reject, HF reject

Trigger Source CH1, CH2, AC line, Ext, Ext/5

*Support formats PAL/SECAM, NTSC. Triggers on odd or even field, all lines or line number

Cursors

Types Amplitude, Time

Measurements V, T, 1/ T

Automati c Waveform Measurement

Time Rise time, Fall Time, Cycle Frequency, Period, Positive

Pulse Width, Negative Pulse width, Delay, Phase, X at

Min, X at Max

Voltage MAX, MIN, Peak-Peak, Average, Vrms, High, Low,

Amplitude, Cycle RMS, Cycle Average, Overshoot,

Preshoot

Frequency Hardware counter provides frequency readout of

trigger source with 5 digit resolution

Waveform Math

Math function FFT, add, subtract, multiply, divide

FFT Windows: Hanning, Hamming, Blackman, Rectangular,

Flattop,

2048 sample points

Autoset Single button automatic setup of both channels for

vertical, horizontal and trigger systems

Display

Display Mode 1/4 VGA (5.7") 256 color LCD (320x240) with

adjustable contrast and inverse video

Display Types Point, Vector

Persistence Off, infinite

Waveform Interpolation Sin(x)/x, Linear

Format YT and XY

Power Requi rements 100-240 VAC, 50 VAmax, 47 Hz to 440 Hz

Environmental

Temperature Operating: 0º C to +40º C

Nonoperating: -20º C to +55º C

Humidity Operating: 95 % RH, 40º C

Nonoperating: 90 % RH, 55º C

Altitude Operating to 3000 m

Pollution Degree Pollution degree 2 for indoor use only.

Electromagnet ic compatibil ity and Safety

EMC This oscilloscope is in compliance with council EMC

directive 2004/108/EC

Safety EN61010-1:2001

General

Dimensions 310 mm (W) x 147 mm (H) x 269 mm (D)

Width x Height x Depth 12.2 in x 5.8 in x 10.6 in

Weight 3.6 kg (8 lbs)

Accessories

Supplied: User Manual, Two 150 MHz 10:1 passive probes (model PR 37A),

Power cord , USB interface cable, Comsoft Software Installation disk

Optional: PR 32A Demodulator Probe, PR 55 High Voltage

Probe

∇ ∇ ∇

Digital Storage Oscilloscope

Model 2534