Frequency section

Frequency range

50kHz to 3.3GHz

Center frequency

Resolution

100kHz
Settable via rotary encoder, numeric or function key

Accuracy

within ±(30 + 20T)kHz ± 1dot
   @frequency span: 200kHz to 10MHz, RBW: 30kHz,
       23 ± 5°C

within ±(100 + 700T)kHz ± 1dot
   @frequency span: 20MHz to 3.3GHz, RBW: 100kHz,
       23 ± 5°C

T: Sweep time(s)

RBW frequency error

within ±6% of RBW @RBW: 3kHz, 30kHz
within ±30% of RBW @RBW: 100kHz to 3MHz

Frequency span

Range

0Hz (zero span),
200kHz to 2GHz (1-2-5 step) and 3.3GHz

Accuracy

within ±3% ± 20TkHz ± 1dot
   @frequency span: 200kHz to 10MHz, 23 ± 5°C

within ±3% ± 200TkHz ± 1dot
   @frequency span: 20MHz to 3.3GHz, 23 ± 5°C

T: Sweep time(s)

Display resolution

(horizontal)

Frequency span/250
The unit displays 251 horizontal dots but stores 1001 trace data points internally which can be captured via RS232 interface

Resolution bandwidth (-3dB bandwidth)

Range

3kHz to 3MHz (1-3 step) and AUTO

Accuracy

within ±20%

Shape Factor

1:12 (typical, 3dB:60dB)

Video bandwidth

100Hz to 1MHz (1-3 step), AUTO

SSB phase noise

-90dBc/Hz (typical) @100kHz offset, RBW: 3kHz, VBW: 100Hz, Sweep time: 0.3s

Spurious response

< -60dBc

Harmonics

< -40dBc @100MHz to 3.3GHz

Amplitude section

Reference level

Range

+10 to -60dBm (1dB step)

Accuracy

within ±0.8dB ± 1dot
@center frequency: 100MHz, RBW: 3MHz, VBW: 1MHz, ATT: 0dB, 23 ± 5°C

Unit

dBm, dBV, dBmV, dBµV, dBµV/m, dBµA/m
(dBµV/m and dBµA/m are available for certain measurement functions)

Average noise level

-110dBm (typical)
@center frequency: 100MHz, RBW: 3kHz, VBW: 100Hz

Frequency response

Within ±2.0dB ± 1dot @50kHz to 100MHz
Within ±1.0dB ± 1dot @100MHz to 3.3GHz

Input impedance

50Ω

Input VSWR

< 2.0

Input attenuator

Operating range

0 to 25dB (1dB step), coupled with reference level

Switching error

within ±0.6dB @100MHz

RBW switching error

within ±0.6dB

Display resolution

200 dots

Display scale

Scale

10dB/div, 2dB/div

Accuracy

within ±0.8dB/10dB ± 1dot
within ±0.2dB/2dB ± 1dot
within ±1.6dB/70dB ± 1dot

Input damage level

+23dBm (CW average power), 25VDC

Sweep section

Sweep time

Range

10ms to 30s and AUTO (1-3 step) @ 0 to 2GHz span
30ms to 30s and AUTO (1-3 step) @full span

Accuracy

within ±0.1% ± 1dot @ 0 to 2GHz span
within ±1.5% ± 1dot @ full span

Trigger mode

AUTO (frequency span: zero span)

Detection mode

Positive peak, Negative peak, Sample

Measurement and Calculation Functions

Markers

NORM: displays frequency (7 digits max) and level (4 digits max) at marker point.
DELTA: displays ∆f (Frequency) and ∆dBx (level)

Peak search

NORM: searches a peak point within full range.  This mode also supports NEXT peak (10max).
ZONE: searches a peak point within a zone defined by center and width.

Calculations

NORM, MAX HOLD, MIN HOLD, AVERAGE, OVER WRITE
MAX/MIN HOLD: 2 to 1024 times

AVERAGE: 2 to 256

Measurements

Measure Channel power, Adjacent channel leakage power, Occupied frequency bandwidth, Electric field strength (requires antenna), Magnetic field strength (requires magnetic field probe)

AUTO tuning

Automatically scans the full bandwidth, detects the maximum level spectrum and centers it on screen.  Automatically adjusts reference level, RBW, VBW and sweep time to optimum levels.

Tracking Generator

   Frequency range

5MHz to 3.3GHz

   Output Level

-10dBm ± 1dB @1GHz (fixed)

   Output flatness

±1.5dB

   Output impedance

50Ω

   VSWR

< 2.0

   Output connector

SMA (J)

General

Input connector

SMA (J)

Save/Load

Save

Saves 100 traces and 100 setups

Load

Loads 1 trace and 1 setup

Communications

Interface

RS-232C

Baud rate

2,400 to 38,400bps

Hard copy (Allows direct hard copy with optional printer.)

Display

Display

LCD

Backlight

CFL backlight

Resolution

320 (H) × 240 (V) dots

Power source

Battery

Ni-MH battery

   Operating
   Time

Approx. 110 min. with the backlight turned off
(battery fully charged)

External DC source

DC jack, +4.75 to +5.25VDC/4A

Immunity of radiated interference
Level display at 10V/m

Less than -35dBc (reference level: 10dBm)

Immunity to cabled interference
Level display at transient interference of 4.0kV

Less than -30dBc (reference level: 10dBm)

Environmental and size

Operating temperature

0 to 50°C (Guaranteed at 23 ± 10°C, without soft carrying case)

Operating humidity

less than 40°C/80%RH
(Guaranteed at less than 33°C/70%RH, without soft carrying case)

Storage temperature

-20 to 60°C, less than 60°C/70%RH

Dimensions

162 (W) × 70 (H) × 260 (D) mm

6.38 (W) × 2.76(H) × 10.25 (D) inch

(exclude projections and stand)

Weight

approx. 4lbs (1.8kg), including battery
approx. 3.3lbs (1.5kg) without battery