 |
BK Precision 2860A - RUGGEDIZED 1500V 0.5% DMM
|
 Click to zoom
BK Precision 2860A - RUGGEDIZED 1500V 0.5% DMM
Heavy Duty 1500 VDC & 1000VAC rating Ruggedized construction Includes rubber boot Withstands 5 foot drop Extra large, high contrast LCD display Gasket sealed against dirt and contaminants Water resistant High energy fused on all current ranges Auto power off saves batteries Built in probe holders 0.5% DCV accuracy Manual ranging 3 1/2 digit, 2000 count Large 0.8" LCD display
 |
 Specifications
| DC Volts | Manual ranging | | Ranges | 200 mV, 2V, 20V, 200V, 1500V | | Resolution | 100 uV, 1 mV, 10 mV, 100 mV, 1V | | Accuracy | +-(0.5% rdg + 1 dgt) | | Overload protection | 1500V peak | | Input Impedance | 10 M | | AC Volts | Manual ranging | | | avg. responding, rms reading | | Ranges | 200mV, 2V, 20V, 200V, 1000V | | Resolution | 100uV, 1 mV, 10 mV, 100 mV, 1V | | Accuracy | +-(1.25% rdg + 4 dgt) | | Frequency Response | 40 kHz - 500Hz | | Overload Protection | 1500V peak | | Input Impedance | 10 MOHm | | Current | Manual ranging | | | AC avg. responding, rms reading | | Ranges | 200uA, 2 mA, 20 mA, 200 mA, 20A* | | Resolution | 0.1uA, 1uA, 10 uA, 100 uA, 10 mA | | Accuracy (DC) | +-(1.0% rdg + 1 dgt) | | | +-(2.0% rdg + 3 dgt) for 20A | | Accuracy (AC) | +-(1.5% rdg + 3 dgt) | | | +-(2.5% rdg + 4 dgt) for 20A | | Frequency Response | 40Hz - 500Hz | | Overload Protection | High energy 600V, 1A full for uA/mA, High energy 600V, 15A for 20A | | Resistance | Manual ranging | | Ranges | 200, 2 kOhm, 20kOhm, 200kOhm, 2MOhm, 20MOhm | | Resolution | 0.1, 1 Ohm, 10Ohm, 100Ohm, 1 kOhm, 10 kOhm | | Accuracy | +-(0.75% rdg + 1 dgt) | | | +-(1.5% rdg + 5 dgt) for 20M | | Overload Protection | 600V peak | | Diode Check | Tested at 1.5 mA, 3.3V max typical tested at 1 mA 3.2V max typical | | Continuity | Beeper sounds below 100 approx. | | Display | 0.8'' LCD, 1999 count | | Sampling rate | 2.5/sec. | | Operating Temperature | 32 0 to 122 0 F (0 0 C to 50 0 C), < 80% RH | | Power | Single 9V battery | | Battery life | 250 hrs typ (alkaline) | | Auto power off | Approx. 30 min. | | Dimensions (HxWxD) | 6.88x3.5x1.5'' (175x89x38 mm) | | Five Year Warranty | | Accessories | SUPPLIED: Battery, test leads, rubber holster, manual
OPTIONAL: TL-1 Replacement Test Leads, TL-2A Deluxe Test LEads, TL-3 Accessory TIp Kit (for TL-2A), TL-130A General Purpose DMM Kit, PR-28A High Voltage Probe, CP-3 AC/DC Current Clamp Adapter
Carrying Case (not included): LC-29B | | *10A continuous, 20A for 30 seconds max. |
|
|
|
|
