Frequency Characteristics | |
Waveforms | Sine, Square, Triangle, +-Pulse, +-Ramp |
Range | 0.01 Hz to 10 MHz in 5 ranges |
Resolution | 5 digits |
Variable Duty Cycle | 0 to 100% cont variable |
Fine | +-5% of coarse setting |
Operating Modes | Normal, sweep, VCG |
Frequency Stability | Output will change less than 0.009% over 15-minutes after 1-hour warm-up |
Output Level Characteristics | |
Impedance | 50W +- 10% |
Level | 0.02 to 20 Vp-p Open circuit 0.01 to 10Vp-p into 50 W (Accuracy: +50mVp-p) |
Amplitude | Variable |
Attenuation | 2 Ranges one with a -20 dB (+ 1 dB) and one without |
DC Offset | Preset: + 0.1 V typical Variable: + 10V open-circuit + 5 into 50 W |
SINE Wave | |
Distortion | <=1% typical at 1 kHz |
Flatness | +5% +(.45 dB) |
Square wave | |
Symmetry | 0.1 Hz to 100 kHz < 2% |
Rise time | <= 20 ns (10% to 90%) |
Triangle Wave | Linearity: >= 98% to 100 kHz |
TTL Output | |
Threshold Level | 0.8V to 2.4V |
Rise time | <= 25nS (10% to 90% of Threshold) |
Duty Cycle | 50% typical |
CMOS Output | |
Max. Frequency | 10 MHz |
Level | 4V to 14V +0.5Vp-p (cont. variable 5MHz max.) |
Rise Time | <= 120nS (10% to 90%) |
VCG (Voltage Controlled Generator) | |
Input Voltage | 0-10V + 1V causes a 100:1 frequency change |
Impedance | 10k W +5% |
Sweep Operation | |
Mode | LIN/LOG |
Width | 100:1 continuously variable, 3-digit resolution |
Rate | 0.01s to 30s cont variable, 4-digit resolution |
Sweep Output | 0 to 10Vpp (into 50W) |
Frequency Counter | |
Range | 5Hz to 100MHz (1 & 10S Gate) 50Hz to 100MHz (01S Gate) 100Hz to 100MHz (0.01S Gate) |
Accuracy | Time base accuracy +1 count |
Time Base Accuracy | +10ppm (230 +-50C) |
Display | 9 digit LED |
Aging | +5ppm/year |
Input | 50mVpp to 10Vpp |
External Input | |
Power Source | 110/220 VAC +10%
50/60 Hz, internal jumper selectable |
Dimensions (HxWxD) | 4.2 x 10.5 x 12.25''
(107 x 267 x 311mm) |
Weight | 6 lbs. (2.7 kg) |
Two Year Warranty | |
Accessories | |
Supplied | Output Cable with BNC to Alligator Clips, Instruction Manual (CD) |
Specifications
