| Specifications |
VERTICAL | | Channels | 2 | | Bandwidth | DC ~ 40MHz (-3dB) | | Rise Time | <8.75ns Approx. | | Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) | Accuracy
| ±(3% x |Readout|+0.1 div + 1mV) | | Input Coupling | AC, DC & Ground | Input Impedance
| 1M±2%, ~16pF | | Polarity | Normal & Invert | Maximum Input
| 300V (DC+AC peak), CATII | | Waveform Signal Process | + , - , FFT | Offset Range
| 2mV/div ~ 50mV/div : ±0.4V
100mV/div ~ 500mV/div : ±4V
1V/div ~ 5V/div : ±40V | | Bandwidth Limit | 20MHz (-3dB) | TRIGGER | | Sources | CH1 , CH2 , Line , EXT | Modes
| Auto, Normal, Single, TV, Edge, Pulse Width | | Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | | Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV | | | 25MHz ~ 40MHz: Approx. 1.5div or 15mV | EXT TRIGGER | | Range | ±15V | | Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV | | Input Impedance | 1MΩ±2% , ~ 16pF | | Maximum Input | 300V (DC AC peak) , CATII | HORIZONTAL | | Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div | | Modes | Main, Window, Window Zoom, Roll, X-Y | | Accuracy | ±0.01% | | Pre-Trigger | 10 div maximum | | Post-Trigger | 1000 div | X-Y MODE | | X-Axis Input | Channel 1 | Y-Axis Input
| Channel 2 | | Phase Shift | ±3° at 100kHz | SIGNAL ACQUISITION | | Real-Time Sample Rate | 250MSa/s maximum | | Equivalent Sample Rate | 25GSa/s maximum | | Vertical Resolution | 8 Bits | | Record Length | 4K Dots maximum | Acquisition Mode
| Normal, Peak Detect, Average | Peak Detection
| 10ns (500ns/div ~ 10s/div) | Average
| 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | CURSORS AND MEASUREMENT | | Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot | | Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle | | Cursors Measurement | Voltage difference between cursors (ΔV)
Time difference between cursors (ΔT) | Auto Counter
| Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the Video trigger mode | CONTROL PANEL FUNCTION | | Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level | | Save Setup | Up to 15 sets of measurement conditions | Save Waveform
| 15 sets of waveform | DISPLAY | | TFT LCD Type | 5.6 inch | Display Resolution
| 234 (Vertically) x 320 (Horizontally) Dots | Display Graticule
| 8 x 10 divisions | Display Brightness
| Adjustable | INTERFACE | | USB Slave Connector | USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) | | SD Card Slot | Image (BMP), waveform data (CSV), and setup (SET) | POWER SOURCE | Line Voltage Range
| AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection | MISCELLANEOUS | | Multi-Language Menu | Available | | Online Help | Available | ACCESSORIES | | | User manual x 1
Power Cord x 1
GTP-060A-2 Probe(10:1/1:1) x 2 | | DIMENSIONS &WEIGHT | | | | 310(W) x 142(H) x 140(D)mm
Approx. 2.5kg |
|
|
