DISPLAY SYSTEM |
Display Device
| Color (320 x 240)
5.7 inch LCD |
| Display Contrast | Adjustable |
| Waveform Display Graticule | 8×10 divisions ( 8 x 12 div, when menu off )
|
Display Mode
| Dot, Vector, Accumulate |
VERTICAL SYSTEM |
| Bandwidth | 60MHz |
Channels
| 2 |
| Vertical Resolution | 8-Bit |
| Vertical Sensitivity | 2mV/div ~ 5V/div |
| Vertical Accuracy | ±3% |
| Rise Time | ＜5.8ns |
| Input Coupling | AC、DC、Ground |
| Input Impedance | 1MΩ ±2%, ~ 18pF |
| Polarity | Positive & Negative |
| Maximum Voltage Between Signal & Common at Input BNC | 300V ( DC+AC peak ), CATII |
| Waveform Signal Process | CH1+CH2、CH1-CH2、FFT |
| Offset Range | 2mV/div ~ 50mV/div：±0.5V;
100mV/div ~ 500mV/div：±5V;
1V/div ~ 5V/div：±50V |
| BW Limit | 20MHz ( -3dB ) |
HORIZONTAL SYSTEM |
| Time Base Range | 1ns/div ~ 10s/div (1-2-5 increments) |
Time Base Mode
| Main、Window、Window Zoom、Roll、X-Y |
| Time Base Accuracy | ±0.01% |
| Delay Range | Pre-trigger : 20 div maximum; Post-trigger : 1000 div |
SIGNAL ACQUISITION SYSTEM |
| Real-Time Sample Rate | 100MS/s maximum on each channel |
Equivalent Sample Rate
| 25GS/s E.T. maximum on each channel |
| Record Length | 125k/CH |
| Peak Detection | 10ns (500ns/div~10s/div) |
Acquisition Mode
| Sample、Peak Detect、Average |
Average
| 2, 4, 8, 16, 32, 64, 128, 256 |
TRIGGER |
Trigger Source
| CH1, CH2, Line, Ext |
| Mode | Auto Level、Auto、Normal、Single、TV、Time Delay、Event Delay、Edge、Pulse Width |
Coupling
| AC, DC, HF, LF, Noise Reject |
Sensitivity
| DC~25MHz : 0.5div or 5mV
25MHz~60MHz : Approx 1.5div or 15mV |
X-Y MODE |
| X-Axis Input / Y-Axis Input | Channel 1 / Channel 2 |
Phase Shift
| ±3° at 100kHz |
| CURSOR & MEASUREMENT | |
| Auto Voltage Measurement | Vpp，Vamp，Vavg，Vrms，Vhi，Vlo，Vmax，Vmin |
Auto Time Measurement
| Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
Cursor Measurement
| Voltage difference between cursors(ΔV),
Time difference between cursors(ΔT),
Reciprocal of ΔT in hertz(1/ΔT) |
FREQUENCY COUNTER
| |
Readout Resolution
| 6 digits |
| Frequency Range | AC Coupled, 20Hz to rated bandwidth; resolution : 10Hz
|
Signal Source
| All available trigger source except the Pulse Width & Video Trigger mode |
| ADJUSTABLE PROBE COMPENSATION SIGNAL |
Frequency Range
| 1kHz ~ 100kHz, 1kHz, step |
Duty Cycle
| 5% ~ 95%, 5%, step |
| EXTERNAL TRIGGER | |
Range
| ±15V |
Sensitivity
| DC~25MHz : ~50mV ; 25~60MHz：~100mV |
| Input Impedance | 1MΩ±2%, ~ 18pF |
Maximum Input
| 300V ( DC+AC peak ) , CATII |
| CONTROL PANEL FUNCTION | |
AutoSet
| "Autoset" can adjust Vertical ( Volt/div ), Horizontal ( Sec/div ) and Trigger level automatically |
| Save/Recall | Up to 15 sets of measurement conditions can be saved and recalled |
| Waveform Trace Save/Recall | 2 sets of waveform can be saved and recalled
|
| INTERFACE | |
Standard
| RS-232C |
| Option Opt.01 | GPIB (Only one kind of opt.01 and opt.11 could be selected.) |
Option Opt.011
| USB, Printer Port, Go/NoGo Output (Only one kind of opt.01 and opt.11 could be selected.) |
POWER SOURCE
| 100V ~ 240V AC 47Hz ~ 63Hz, Auto selection |
| | |
ACCESSORIES |
| | Instruction manual x 1, Power Cord x 1
GDS-806 Series: GTP-060A Probe(10:1/1:1) x 2 |
| DIMENSIONS &WEIGHT | 310(W) x 142(H) x 254(D)mm
Approx. 3.8kg |
Specifications
