CRT |
| Type | 6-inch rectangular type with internal graticule
8 x 10 div (1div=1cm) |
| Accelerating Potential | 2kV |
Z-Axis Input
| Sensitivity: Above 5Vp-p
Max. input voltage: 30V (DC + AC peak)
Bandwidth: DC ~ 2MHz |
Polarity
| Positive-going input decrease |
| Focus Control | Auto focus |
FUNCTION GENERATOR |
| Frequency Range | 0.1Hz ~ 1MHz (7 range) |
| Waveform | Sine Wave, Square Wave, Triangle Wave |
| Frequency Variable Range | 10:1 or more |
| Output Impedance | 50Ω±10%
|
| Voltage | Over 14Vp-p(open circuit) continuous conversion
DC offset possible over±6V when open |
| Sinewave Distortion | 2% Max. (10Hz ~ 100kHz) |
| Squarewave Unsymmetry | ±3% or less (in 1 kHz maximum) |
| Squarewave Rise/Fall Time | 50Ω output: 120ns or less |
VERTICAL SYSTEM |
Sensitivity
| 5mV/div~5V/div±3%, 1mV/div~1V/div±5% (using x5MAG) |
Bandwidth
| DC to 20MHz (x 5MAG.:DC to 7MHz) |
| Rise Time | Approx. 17.5ns (x 5MAG. :Approx. 50ns) |
| Max. Input | 300V (DC+ACpeak) at 1kHz |
| Input Coupling | AC, DC, GND |
| Input Impedance | Approx. 1MΩ// 25pF |
| Vertical Mode | CH1,CH2,DUAL(ALT,CHOP),ADD,CH2 INV |
HORIZONTAL SYSTEM |
| Sweep Time | 0.2μs/div ~ 0.5s/div±3% (±5% at x10 MAG) |
| Max. Sweep Rate | 100ns/div (20ns and 50ns/div are uncalibrated) |
TRIGGER |
| Trigger Mode | AUTO, NORM, TV-V, TV-H |
| Trigger Source | CH1, CH2, ALT, LINE, EXT |
| Trigger Slope | "+" or "-" |
X-Y OPERATION |
| Sensitivity | 5mV ~ 5V/div±4% |
| X-axis Bandwidth | DC ~ 500kHz |
| Phase Error | 3° or less from DC ~ 50kHz |
OUTPUT SIGNAL |
| Trigger Signal Output | Voltage: approx. 20mV/div into 50Ω
Bandwidth : 50Hz to 5MHz (-3dB)
Impedance : Approx.50Ω |
Calibrator Output
| 1kHz Square wave, 2Vp-p±2% |
POWER SOURCE
| |
| AC 115/230V±15%, 50/60Hz |
ACCESSORIES |
| | User manual x 1
Power cord x 1
Probe GTP-060A-4 (10:1/1:1) x 2
Test Lead GTL-101 x 1 |
| DIMENSIONS & WEIGHT | |
| | 310(W) x 150(H) x 455(D)mm
Approx. 8.5kg |
Specifications
