 |
Instek GOS-622G - 20MHz, 2-Channel Analog Oscilloscope with Hold Off Function
|
 Click to zoom
Instek GOS-622G - 20MHz, 2-Channel Analog Oscilloscope with Hold Off Function
| FEATURES | 20MHz Bandwidth, Dual Channel High Sensitivity 1mV/div TV Synchronization Z-Axis Input ALT Triggering Function Hold Off Function CH1 Output |
 |
 Specifications
CRT | | Type | 6-inch rectangular type with internal graticule
8 x 10 div (1div=1cm) | | Z-Axis Input | Input Impedance: Approx. 5kΩ
Sensitivity: Above 3Vp-p
Bandwidth: DC ~ 5MHz | VERTICAL SYSTEM | | Sensitivity | 5mV/div~5V/div±3%,1mV~2mV/div±5% | | Bandwidth | DC ~ 20MHz
DC ~ 10MHz at 1~ 2mV/div | | Rise Time | 17.5ns (35ns at 1mV~2mV/div) | Input Impedance
| Approx. 1MΩ | Input Coupling
| AC, DC, GND | | Vertical Mode | CH1, CH2, DUAL, ADD, CH2 INV
(Dual automatic switching ALT and CHOP) | HORIZONTAL SYSTEM | Sweep Time
| 0.1μs ~ 0.5s/div±3%
100ns ~ 50ms/div±5% (x 10 MAG)
10ns ~ 50ns±8% (x 10 MAG) | TRIGGER | | Trigger Mode | AUTO, NORM | Trigger Source
| CH1, CH2, ALT, LINE, EXT | | Trigger Coupling | AC, DC, HF REJ, TV | | Trigger Slope | "+" or "-" | X - Y OPERATION | Sensitivity
| 5mV ~ 5V/div±4% | X-axis Bandwidth
| DC ~ 1MHz | | Phase Error | 3° or less from DC ~ 50kHz | OUTPUT SIGNAL | Trigger Signal Output
| Voltage: approx. 50mV/div into 50Ω | Calibrator Output
| 1kHz Square wave, 2Vp-p±2% | POWER SOURCE
| | | | AC 100V/120V/220V/230V±10%, 50Hz/60Hz | ACCESSORIES | | | User manual x 1
Power Cord x 1
GTP-060A-4 Probe (10:1/1:1) x 2 | | DIMENSIONS & WEIGHT | | | | 310(W) x 150(H) x 455(D) mm
Approx. 8.2kg |
|
|
|
|
