 |
Instek GSP-810 - 1GHz Spectrum Analyzer
|
 Click to zoom
Instek GSP-810 - 1GHz Spectrum Analyzer
| FEATURES | Frequency Range: 150kHz ~1GHz Fully Digital Phase Locked Loop Technique Design High Frequency Stability:±10ppm High Resolution of Span to Measure the More Detailed Signal: Zero, 2kHz~100MHz/div RBW : 3K, 30k, 220k, 4MHz High Input Protection Level : +30dBm,±25VDC Reference Level Range : -30dBm~ +20dBm Good Noise Floor Performance: -95dBm @30kHz, -100dBm Typical @220kHz RBW Two Markers for Absolute and Relative Measurement Functions: Max. Hold, Average (2~32 Traces), Freeze, Peak Search, Marker to Center Functions 9 Memories of Save/Recall RS-232C Interface and Software to get Trace from GSP-810 to PC Options: Tracking Generator, Power Meter, Remote Control Software |
 |
| Specifications |
FREQUENCY | | Frequency Range | 150kHz~1GHz | | Aging Rate | ± 10ppm, 0~50°C, 2ppm/yr | Span Range
| Zero, 2kHz~100MHz/div in 1-2-5 sequence | | Phase Noise | -77dBc/Hz @ 1GHz 30kHz offset | | Frequency Resolution | 1kHz C.F. entry, 40Hz sweep resolution at 2kHz/div | | Frequency Display | 6 1/2 digit setting | Frequency Control
| Digital phase locked | RESOLUTION BANDWIDTH | RBW Range
| 3kHz, 30kHz, 220kHz, 4MHz | RBW Accuracy
| 15% | Video Bandwidth Range
| 1.6kHz/90kHz couple with RBW | AMPLITUDE | | Measurement Range | -100dBm~+20dBm | | Overload Protection | +30dBm continuous, ± 25VDC | | Reference Level Range | -30dBm~+20dBm | | Amplitude Display Range | 75dB | | Amplitude Accuracy | ±1.5dB typical @ 0dBm, 80MHz | | Frequency Flatness | ±1.5dB over 100MHz,±2.5dB typical over entire band/±3dB:150kHz~10MHz | Amplitude Level Linearity
| ± 1.5dB over 70dB | DYNAMIC RANGE | | Average Noise Floor | -95dBm @30kHz RBW, -100dBm typical /
-75dBm: 150kHz~10MHz | | Third Inter-Modulation | <-70dBc, @-40dBm input, 2tones, 2MHz apart/
<-45dBc:150kHz~10MHz | | Harmonic Distortion | <-40dBc, RF input < selected reference | | Non-Harmonic Spurious | <-60dBc typical down from reference level, average, 5MHz/div | DISPLAY SYSTEM | | Display Device | CRT Display, 8 x 10 graticule, 6-inch waveform screen
LCD Display, 4 line x 20 character data screen | Display Function
| Center Frequency Control, Bandwidth,
Reference Level, Span Range, Amplitude | FUNCTIONS | Marker Mode
| Absolute, relative, PK->marker, marker->center | Number of Markers
| 2 | | Marker Resolution | 0.1dB, 1kHz | | Marker Accuracy | 0.1dB±amplitude accuracy | | Memory | 10 save/recall memory | | Trace | Max. hold, average(2~32 traces), freeze(Hold) | Setup
| Access parameters | Demodulator
| WB FM, 120kHz deviation
MB FM, 75kHz deviation
NB FM, 30kHz deviation
AM
Outputs : Internal speaker, 3.5mm stereo jack,
wired for mono operation | | Calibrate Signal | 80MHz, -30dBm | Interface
| RS-232C standard & remote display software
(The software will be downloaded from GW Web-Site.) | | POWER SOURCE AC | | | | 100V/120V/220V/230V ±10%, 50/60Hz | ACCESSORIES | | | User manual x 1, Power cord x 1 | | DIMENSIONS & WEIGHT | | | | 310(W) x 150(H) x 455(D) mm
Approx. 8.5kg |
|
|
|
|
