 |
Instek GSP-827 - 2.7GHz Spectrum Analyzer
|
 Click to zoom
Instek GSP-827 - 2.7GHz Spectrum Analyzer
| FEATURES | Frequency Range: 9kHz ~2.7GHz Input Range: -100dBm ~ +20dBm Average Noise Floor: -100dBm Power Measurements: ACPR/OCBW/CH Power Split Window: Simultaneous Measurements in Two Separate Frequency Spans 10 Markers: Delta Mode, Peak Search, Peak Track Trace Function: Dual-Trace Display, Peak Hold, Freeze, Average, Trace Math Limit Line: Upper/Lower Limit with Pass/Fail Test Trigger Function: Video/External Clock/Calendar: Time/Date Stamp in Saved Data Wide Range of External Reference Clock: 1MHz ~ 19.2MHz 100 Trace/State Memories with Date/Time Stamp and File Name TG: 9kHz ~ 2.7GHz, -50dBm ~ 0dBm (Option) EMI Filters (Option) AC/DC/Battery Operation (Option) Compact Size and Light Weight at 4.5kg |
 |
 Specifications
FREQUENCY | | Frequency Range | 9kHz~2.7GHz | | Aging Rate | ± 10ppm, 0~50°C, 5ppm/yr | | Span Range | 2kHz ~ 2.5GHz in 1-2-5 sequence, full span, zero span | | Phase Noise | -85dBc/Hz @1GHz 20kHz offset typical | | Sweep Time Range | 50ms~25.6s | RESOLUTION BANDWIDTH | | RBW Range | 3kHz, 30kHz, 300kHz, 4MHz | | RBW Accuracy | 15% | | Video Bandwidth Range | 10Hz ~ 1MHz in 1-3 steps | AMPLITUDE | | Measurement Range | -100dBm ~ +20dBm: 1MHz~2.5GHz @ 3k RBW
-95dBm ~ +20dBm: 2.5GHz~2.7GHz @ 3k RBW
-75dBm ~ +20dBm: 150kHz~1MHz @ 3k RBW
-65dBm ~ +20dBm: 50kHz~150kHz @ 3k RBW | | Overload Protection | +30dBm, ±25VDC | | Reference Level Range | -30dBm ~ +20dBm | | Amplitude Display Range | 75dB | | Amplitude Accuracy | ±1.5dB @100MHz | | Frequency Flatness | ±1.5dB | | Amplitude Level Linearity | ±1.5dB over 70dB | DYNAMIC RANGE | | Average Noise Floor | -100dBm: 1MHz~2.5GHz
-95dBm: 2.5GHz~2.7GHz
-75dBm: 150kHz~1MHz
-65dBm: 50kHz~150kHz | | Third Inter-Modulation | < -70dBc @-40dBm Input, 2MHz apart | | Harmonic Distortion | < -60dBc @-40dBm Input | | Non-Harmonic Spurious | < -60dB @typical down from Reference Level 150k~2.7GHz | DISPLAY SYSTEM | | Display Device | 640 x 480 high resolution graphical LCD, B&W | | Display Function | Contrast, backlight ON/OFF, Invert screen split window : upper and lower | FUNCTIONS | | Marker Mode | Normal and delta mode
Number: Up to 10 in multi marker mode | | Internal Memory | 100 traces and setup for Save/Recall | | Peak Search | To peak, to center , next peak, peak right, peak left and peak track | | Trace Number | Number:2, tr A and B for display memory
Functions: peak hold, average, freeze, math.
Detect: sample, peak+, AVG 1/2/3, quasi-peak | | Power Measurement | ACPR x 2, OCBW, Channel Power | | Trigger | Functions: Video, External
Mode: continuous, single
Source: video, external (0~5V rising edge)
Setting: Trigger delay, Trigger frequency | | Limit Line | Number: 2, high and low
Functions: Edit:Insert, Delect, Undo Pass/Fail | | Calibration Signal | 100MHz, -30dBm | CONNECTORS | RF Input
| Type: N female, 50Ω nominal
RF input VSWR: <1.5:1, @0dBm Reference Level | | External Reference | Type: BNC female | | Clock Input | 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M | | Reference Clock Output | Type: BNC female, 10MHz | | DC Input | Jack : 5.5mm, 12V | INTERFACE | RS-232C
| Sub-D 9-pin female | GPIB (Option)
| Fully programmable with IEEE488.2 compliance | | POWER SOURCE | | | | AC 100 ~ 240V, 48 ~ 63Hz | ACCESSORIES | | | User manual x 1
Power cord x 1 | | DIMENSIONS & WEIGHT | | | | 330(W) x 170(H) x 340(D) mm
Approx. 4.5kg |
|
|
|
|
