 |
BK Precision Generators |
 Click to zoom |
Features: - 100 kHz to 150 MHz on six bands
- Output to 450 MHz on harmonics
- AM modulation, internal or external Step and variable attenuation
|
Click to zoom |
•20 Hz to 150 kHz Sine/Square Wave Audio Generator
•Sine and square wave generator
•20 Hz to 150 kHz in 46 steps
•Low distortion RC oscillator
•Variable output control
•Compact, fully portable, light weight
•Low battery indicator
|
Click to zoom |
- 0.1 Hz to 9.9999999 MHz Sine/Square Wave Signal Generator
- Simultaneous Sine and Square wave generation
- 0.1 Hz Frequency Selectability
- 0.02% Signal Accuracy
- Sine Wave Output - 0 to 4.5Vp-p (no load)
- Square Wave Output - 5Vp-p (no load)
- 50 �� output impedance
- AC power adapter included
- Can be powered by a standard 9V battery
|
Click to zoom |
Description: The 4001A and 4003A are 4 MHz sweep function generators. The sweep function offers linear or log sweep with variable sweep rates and widths. The model 4003A includes a 20 MHz 5-digit external frequency counter. Features: - Generates Sine, Triangle, and Square waveforms from 0.5 Hz to 4 MHz
- Generates Ramp and ±Pulse waveforms from 0.5 Hz to 3.5 MHz
- 20 Vpp output into open circuit (10 Vpp into 50Ω)
- Lin or Log Sweep Function
- TTL output
- Adjustable ±10 V DC offset
- Variable amplitude output plus 20 dB attenuator
- Kensington security slot
- cUL approved
|
Click to zoom |
Description: Generates Sine, Triangle & Square waveforms from 0.5Hz to 4MHz 20Vpp output into open circuit (10Vpp into 50 Ohms) TTL and CMOS Output <25nS Voltage Control Generator (VCG) input 100% DC offset 5 digit LED display Variable amplitude output plus 20dB attenuator. Features: - Generates Sine, Triangle, and Square waveforms from 0.5 Hz to 4 MHz
- Generates Ramp and ±Pulse waveforms from 0.5 Hz to 3.5 MHz
- 20 Vpp output into open circuit (10 Vpp into 50Ω)
- Lin or Log Sweep Function
- TTL output
- Adjustable ±10 V DC offset
- Variable amplitude output plus 20 dB attenuator
- Kensington security slot
- cUL approved
|
Click to zoom |
The 4007DDS has been DISCONTINUED AND REPLACED BY: BK Precision 4013DDS - 12MHz DDS Sweep Function Generator
The model 4007DDS is a versatile sweep function generator utilizing an advanced direct digital synthesis (DDS) design. The unit generates superb quality waveforms with high signal precision and stability. It provides sine & square wave outputs over the frequency range from 0.1 Hz to 7 MHz in one extended range (triangle/ramped wave outputs to 100KHz. 7MHz Frequency Range (sine & square only) Sine, Square, Triangle Lin or Log Sweep Function Adjustable Duty Cycle Adjustable DC Offset
|
Click to zoom |
Description: 0.2 Hz to 2 MHz Sine, Square, Triangle, Pulse & Ramp output Variable duty cycle Variable DC offset Variable amplitude output plus 20dB attenuator 20Vpp output into open circuit (10Vpp into 50 Ohms)
|
Click to zoom |
5MHz Function Generator Features: - 0.5 Hz to 5 MHz
- Sine, Square, Triangle, Pulse, & Ramp output
- Coarse and Fine tuning
- 4 digit LED display
- Variable duty cycle
- Variable DC offset
- Variable amplitude output plus 20dB attenuator
- 20Vpp output into open circuit (10Vpp into 50 Ωs)
- cUL certified
|
Click to zoom |
Description: 0.5 Hz to 5 MHz Sine, Square, Triangle, Pulse, & Ramp output Coarse and Fine tuning 4 digit LED display Linear and log sweep Variable duty cycle Variable DC offset Variable amplitude output plus 20dB attenuator 20Vpp output into open circuit (10Vpp into 50 Ohms)
|
Click to zoom |
he model 4013DDS is a versatile sweep function generator utilizing an advanced direct digital synthesis (DDS) design. The unit generates superb quality waveforms with high signal precision and stability. It provides sine & square wave outputs over the frequency range from 0.1 Hz to 12 MHz in one extended range (triangle/ramped wave outputs to 1MHz). 12MHz Frequency Range (sine & square only) Sine, Square, Triangle Lin or Log Sweep Function Adjustable Duty Cycle Adjustable DC Offset
|
Click to zoom |
Features: - 0.1 Hz to 10 MHz
- Sine, Square, Triangle, Pulse, & Ramp output
- Coarse and Fine tuning
- 5 digit LED display
- Linear and log sweep
- Variable duty cycle
- Variable DC offset
- cUL certified
|
Click to zoom |
Discontinued Product - Replaced by 4040DDS The B+K Precision Model 4017B DDS Sweep/Function Generator is a versatile signal source which combines several functions into one unit including waveform generator, pulse generation (through variable symmetry), frequency sweep and frequency counter. The heart of the function generator is a DDS based system that produces precision timing for sine, square, or triangle wave generation with frequencies between 0.01 Hz and 10 MHz. A continuously variable offset allows the output to be injected directly into circuits at the correct bias level. The versatility and capabilities of the 4017B allows for a vast number of applications in both analog and digital electronics fields including Design Engineering, Manufacturing, Servicing and Education. The 4017B has the ability to output a wide range of frequencies that encompasses sub-audible, audio, ultrasonic, and RF applications. Features: Up to 10MHz available on Sine, Square & Ramp Waveforms 2x16 LCD Display area Clean output waveforms "Intelligent Encoder" frequency control knob Linear and log sweeps Output level displayed on the LCD CMOS/TTL Outputs Adjustable DC offset RS232 Interface
|
Click to zoom |
The B&K Precision Model 4030 is a versatile signal source which combines four functions into one unit waveform generation, pulse generation (through variable symmetry), frequency sweep operation, and triggered operation. The 4030 offers low rise and fall time pulsed signals up to 10MHz to meet many test and measurement applications.
|
Click to zoom |
Description: 0.2 Hz to 20 MHz Sine Sweep Function Generator Features: - Sine, Square, Triangle, Pulse, & Ramp output
- Coarse and Fine tuning
- AM & FM modulation
- Burst operation
- External frequency counter to 30 MHz
- Linear and log sweep
- Variable duty cycle
- Variable DC offset
- cUL certified
|
Click to zoom |
Description: The model 4040DDS is a must have for anyone needing a low cost, full featured direct digital synthesis (DDS) generator with a menu-driven front panel interface that includes a large, easy-to-read graphical LCD display. Waveform parameter changes and data entry can be made using the front panel rotary knob. The unit generates superb quality waveforms with high signal precision and stability. It provides sine & square wave outputs over the frequency range from 0.1 Hz to 20 MHz in one extended range (triangle/ramped wave outputs to 2MHz). A full range of triggering capabilities is available, including internal-external trigger source and gated modes of operation. Features: - 20MHz Frequency Range (sine & square only)
- Sine, Square, & Triangle
- Modulation in both AM & FM
- Lin or Log Sweep Function
- Adjustable Duty Cycle
- Adjustable DC Offset
- Bright Informative LCD
|
Click to zoom |
he model 4045 is a must have for anyone needing a low cost, full featured direct digital synthesis (DDS) generator with a menu-driven front panel interface that includes a large, easy-to-read graphical LCD display. Waveform parameter changes and data entry can be made using the rotary knob or via the built-in RS-232C interfaces. The unit generates superb quality waveforms with high signal precision and stability. It provides sine & square wave outputs over the frequency range from 0.1 Hz to 20 MHz in one extended range (triangle/ramped wave outputs to 1MHz) Arbitrary waveforms can be edited from scratch or by modifying standard waveforms. A full range of triggering capabilities is available, including internal-external trigger source, gated and burst modes of operation. 20MHz Frequency Range (sine & square only) Sine, Square, Triangle & Arbitrary Waveforms Modulation in both AM & FM Lin or Log Sweep Function Adjustable Duty Cycle Adjustable DC Offset Bright Informative LCD RS-232C Interfac
|
Click to zoom |
The B+K Model 4070A has been discontinued. It has been replaced with Model 4075
|
Click to zoom |
The 4075 is a versatile high performance function/arbitrary waveform generator with the largest arbitrary memory depth in its class. The generator combines the ability to produce nearly any conceivable arbitrary waveform with accuracy and precision and a DDS architecture offering easy to use conventional function generator capabilities. Arbitrary waveforms have 14 bit amplitude resolution, 100 MSa/s sample rate and up to 400,000 points length. Waveforms can be output in continuous, triggered, gated or burst modes. The instrument can be remotely controlled using SCPI-compliant commands via RS232. Extensive features such as internal or external AM, FM and FSK modulation along with versatile sweep capabilities and variable edge pulse generation make this generator suitable for a wide range of applications including electronic design, sensor simulation and functional test. Features & Benefits: - 14-bit, 100 MSa/s, 400 k point Arbitrary Waveform Generator
- 25 MHz Sine / 25 MHz Square waveforms
- Predefined Pulse, Ramp, Triangle, Noise, Sin (X)/X, Exponential and Gaussian waveforms
- AM, FM and FSK modulation
- 10 mVpp to 10 Vpp with 1 mVpp settable amplitude resolution
- Large graphical LCD shows a detailed output waveform representation
- Fully programmable markers
- Fully protected output
- Closed case calibration
- Arbitrary waveform editing software included
- SCPI compliant command set
|
Click to zoom |
Description: The 4075 is a versatile high performance function / arbitrary waveform generator with the largest arbitrary memory depth in its class. The generator combines the ability to produce nearly any conceivable arbitrary waveform with accuracy and precision and a DDS architecture offering easy to use conventional function generator capabilities. Arbitrary waveforms have 14 bit amplitude resolution, 100 MSa/s sample rate and up to 400,000 points length. Waveforms can be output in continuous, triggered, gated or burst modes. The instrument can be remotely controlled using SCPI-compliant commands via RS232.
Extensive features such as internal or external AM, FM and FSK modulation along with versatile sweep capabilities and variable edge pulse generation make this generator suitable for a wide range of applications including electronic design, sensor simulation and functional test. Features & Benefits: - 14-bit, 100 MSa/s, 400 k point Arbitrary Waveform Generator
- 25 MHz Sine / 25 MHz Square waveforms
- Predefined Pulse, Ramp, Triangle, Noise, Sin (X)/X, Exponential and Gaussian waveforms
- AM, FM and FSK modulation
- 10 mVpp to 10 Vpp into 50 ohms
- Large graphical LCD shows a detailed output waveform representation
- Fully programmable markers
- Fully protected output
- Closed case calibration
- SCPI compliant command set
- RS232 standard and GPIB optional
- Simple integration with WaveXpress waveform editing software to send your waveform creations to the arbitrary waveform generator
|
Click to zoom |
The 4078 is a versatile high performance dual channel function/arbitrary waveform generator with the largest arbitrary memory depth in its class. The generator combines the ability to produce nearly any conceivable arbitrary waveform with accuracy and precision and a DDS architecture offering easy to use conventional function generator capabilities. Arbitrary waveforms have 14 bit amplitude resolution, 100 MSa/s sample rate and up to 400,000 points length. Waveforms can be output in continuous, triggered, gated or burst modes. The instrument can be remotely controlled using SCPI compliant commands via RS232. Extensive features such as internal or external AM, FM and FSK modulation along with versatile sweep capabilities and variable edge pulse generation make this generator suitable for a wide range of applications including electronic design, sensor simulation, functional test or generation of I/Q modulated signals. Features & Benefits: - 14-bit, 100 MSa/s, 400 k point Arbitrary Waveform Generator
- 25 MHz Sine / 25 MHz Square waveforms
- Predefined Pulse, Ramp, Triangle, Noise, Sin (X)/X, Exponential and Gaussian waveforms
- Both channels offer full functionality. All wave form parameters such as frequency, amplitude and offset can be set independently
- Synchronize both output signals to the same clock signal (external or internal) and precisely adjust the phase relationship between the two signals
- Economical baseband I/Q signal source
- Saves cost and bench space
- AM, FM and FSK modulation
- 10 mVpp to 10 Vpp with 1 mVpp settable amplitude resolution
- Large graphical LCD shows a detailed output waveform representation
- Fully programmable markers
- Fully protected output
- Closed case calibration
- Arbitrary waveform editing software included
- SCPI compliant command set
List Price: $2,350.00
Special Price: $2,295.00 | | | Add to Cart |
|
Click to zoom |
Description: The 4078GPIB is a versatile high performance dual channel function / arbitrary waveform generator with the largest arbitrary memory depth in its class. The generator combines the ability to produce nearly any conceivable arbitrary waveform with accuracy and precision and a DDS architecture offering easy to use conventional function generator capabilities. Arbitrary waveforms have 14 bit amplitude resolution, 100 MSa/s sample rate and up to 400,000 points length. Waveforms can be output in continuous, triggered, gated or burst modes. The instrument can be remotely controlled using SCPI compliant commands via GPIB interface.
Extensive features such as internal or external AM, FM and FSK modulation along with versatile sweep capabilities and variable edge pulse generation make this generator suitable for a wide range of applications including electronic design, sensor simulation, functional test or generation of I/Q modulated signals. Features & Benefits: - 14-bit, 100 MSa/s, 400 k point Arbitrary Waveform Generator
- 25 MHz Sine / 25 MHz Square waveforms
- Predefined Pulse, Ramp, Triangle, Noise, Sin (X)/X, Exponential and Gaussian waveforms
- AM, FM and FSK modulation
- 10 mVpp to 10 Vpp into 50 ohms
- Large graphical LCD shows a detailed output waveform representation
- Fully programmable markers
- Fully protected output
- Closed case calibration
- SCPI compliant command set
- RS232 standard and GPIB optional
- Simple integration with WaveXpress waveform editing software to send your waveform creations to the arbitrary waveform generator
|
Click to zoom |
Model 4084 is a versatile, laboratory grade synthesized function generator. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms. The generator produces high purity, low distortion sine waves and provides a full suite of analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes. The 4084’s versatility and capabilities make it an ideal tool for many general-purpose test and bench applications or for use in Training and Education. Frequency range of 1µHz to 20MHz for sine and square Clean and stable output of very small signals down to the 1mV to 10mV range (50 ohm) Support of internal and external modulation sources as well as internal, external and gated trigger sources Convenient data input via numeric keypad or knob. Adjust modulation parameters precisely and over a wide range Fully programmable via the standard RS232 interface using SCPI compatible commands. 100 MHz Universal Counter with frequency measurement and totalize function
|
Click to zoom |
Model 4084AWG is a laboratory grade synthesized function generator with arbitrary capability. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms as well as custom arbitrary waveforms. The 4084AWG produces high purity, low distortion sine waves and square waves up to 20 MHz and provides extensive analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes. The included intuitive Windows Software lets users create and edit custom arbitrary waveforms and download them with a single click to the instrument’s non volatile memory. Unmatched affordability and high performance make the 4084AWG a perfect fit for many applications in Electronic Test and Design, Sensor Simulation and Education and Training. Clean and stable output of very small signals down to the 1mV – 10mV range (50 ohm) Support of internal and external modulation sources as well as internal, external and gated trigger sources Create arbitrary waveforms with 10 bit vertical resolution, 16k memory depth and a sample rate of 200 MHz Seamless import of waveforms from any Tektronix® TDS1000, TDS2000, TPS2000 and TDS3000 series digital storage oscilloscope. Easily recreate waveforms originating from the DSO’s display or internal memory. Fully programmable via the standard RS232 interface using SCPI compatible commands. 100 MHz Universal Counter with frequency measurement and totalize function
List Price: $1,295.00
Special Price: $1,265.00 | | | Add to Cart |  |  |
|
Click to zoom |
Model 4085 is a versatile, laboratory grade synthesized function generator. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms. The generator produces high purity, low distortion sine waves and provides a full suite of analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes. The 4085’s versatility and capabilities make it an ideal tool for many general-purpose test and bench applications or for use in Training and Education.
Frequency range of 1µHz to 40MHz for sine and square
Clean and stable output of very small signals down to the 1mV to 10mV range (50 ohm)
Support of internal and external modulation sources as well as internal, external and gated trigger sources
Convenient data input via numeric keypad or knob.
Adjust modulation parameters precisely and over a wide range
Fully programmable via the standard RS232 interface using SCPI compatible commands.
100 MHz Universal Counter with frequency measurement and totalize function
|
Click to zoom |
Model 4086 is a versatile, laboratory grade synthesized function generator. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms. The generator produces high purity, low distortion sine waves and provides a full suite of analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes. The 4086’s versatility and capabilities make it an ideal tool for many general-purpose test and bench applications or for use in Training and Education.
Frequency range of 1µHz to 80MHz for sine and up to 40 MHz for square
Clean and stable output of very small signals down to the 1mV to 10mV range (50 ohm)
Support of internal and external modulation sources as well as internal, external and gated trigger sources
Convenient data input via numeric keypad or knob.
Adjust modulation parameters precisely and over a wide range
Fully programmable via the standard RS232 interface using SCPI compatible commands.
100 MHz Universal Counter with frequency measurement and totalize function
|
Click to zoom |
The 4086AWG produces high purity, low distortion sine waves up to 80 MHz, square waves up to 40 MHz and provides extensive analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes
|
Click to zoom |
Model 4087 is a versatile, laboratory grade synthesized function generator. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms. The generator produces high purity, low distortion sine waves and provides a full suite of analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes. The 4087’s versatility and capabilities make it an ideal tool for many general-purpose test and bench applications or for use in Training and Education.
Frequency range of 1µHz to 120MHz for sine and up to 40 MHz for square
Clean and stable output of very small signals down to the 1mV to 10mV range (50 ohm)
Support of internal and external modulation sources as well as internal, external and gated trigger sources
Convenient data input via numeric keypad or knob.
Adjust modulation parameters precisely and over a wide range
Fully programmable via the standard RS232 interface using SCPI compatible commands.
100 MHz Universal Counter with frequency measurement and totalize function
|
Click to zoom |
Description: Model CC510 General Purpose Function Generator Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50O impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use. Features:
BNC & N Type 50O Connectors Gold plated center contacts Storage case Applications:
|
Click to zoom |
Description: Model CC520 Deluxe Function Generator / Counter Kit provides a complete range of coaxial adapters and cables for general-purpose function, signal & arbitrary-waveform generators as well as frequency counters. All kit components feature precision machined bodies, 50O impedance and low VSWR to ensure accurate and repeatable measurements. The kit is provided in a convenient foam lined case for easy component selection and storage. Features: - BNC & N Type 50O Connectors
- Deluxe Adapters
- Gold plated center contacts
- Storage case Applications:
- Production Test Stations
- R&D Labs
- Service & Repair Facilities
- Calibration Services
- RF Field Testing
|
|
|
|
|
