BK Precision 760ATC - Automatic Temp. Compensation Probe for model 760
Automatic Temperature Compensation Probe for model 760
32 to 149°F (0 to 65°C)
 |
BK Precision 760CP - Conductivity Probe for model 760
Conductivity Probe for model 760
Conductivity: 2/20mS, 2 ranges
Temperature: 0 to 60.0°C
ATC & variable temperature compensation factor adjustment (0 to 5% per °C)
|
BK Precision 760DOP - Dissolved Oxygen Probe for model 760
Dissolved Oxygen Probe for model 760
Range: 0 to 20 mg/L
Resolution: 0.1 mg/L
Diaphragms & electrolyte included
|
BK Precision 760PH - PH Probe for model 760
pH Probe for model 760
0 to 14 pH
Measuring temperature 0 to 100°C
|
BK Precision AK 710 - Thermolink Software w/RS-232 Cable
Thermolink Software w/RS-232 Cable
|
BK Precision AK 720 - Testlink Software w/RS-232 Cable
Testlink Software w/RS-232 Cable
|
BK Precision AK 760 - Software for model 760
Software for model 760
|
BK Precision AK 87X - Software and RS-232 cable for 878A and 879
Software and RS-232 cable for 878A and 879
|
BK Precision AK IR -RS232C to IR Adapter
RS232C to IR Adapter
|
BK Precision AK 2650 - PC Interface Software for model 2650/2658
The AK 2650 software and serial interface cable allows the 2650 & 2658 to display screen resolutions on a PC that are four times greater then the 250 points displayed on the horizontal axis of the 2650’s LCD display. The 2650 & 2658 samples its input at 1000 points per sweep and it can output these points through its RS 232 port to a PC (the maximum transfer rate is 38,400bps). The AK 2650 not only allows for clearer screen images but it also allows spectrum analyzer setup via a PC.
|
BK Precision AK 2880B - Software for 2880B/2890A DMM with USB
Software for 2880B/2890A DMM with USB
|
BK Precision AK 5491 - Software and RS-232 cable for 5491 & 5492
Software and RS-232 cable for 5491 & 5492
|
BK Precision AN 301 - Dipole Antenna (0.8 to 1GHz) for model 2650/2658
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
|
BK Precision An 302 - Dipole Antenna (1.25 to 1.65GHz) for model 2650/2658
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
|
BK Precision AN 303 - Dipole Antenna (1.7 to 2.2GHz) for model 2650/2658
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
|
BK Precision AN 304 - Dipole Antenna (2.25 to 2.65GHz) for model 2650/2658
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
|
BK Precision AN 305 - Dipole Antenna (390 to 410MHz) for model 2650/2658
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
|
BK Precision AN 306 - Dipole Antenna (4.7 to 6.2GHz) for model 2658
It is possible to measure the electric field strength by connecting one of the optional dipole antennas to the input connector. Dipole antennas that suit many uses are available. AN 301 is mainly for PDC 800MHz and GSM 900MHz bands, AN 302 is mainly for PDC 1500MHz bands, AN 303 is mainly for PHS, W-CDMA and GSM 1800/1900MHz bands, and AN 304 is mainly for 2.4GHz wireless LAN and Bluetooth bands. AN 305 is for 390MHz to 410MHz. AN 306 is for applications between 4.7GHz to 6.2GHz (802.11a & GPS).
|
BK Precision AT 2 - 150/300/450/900MHz Flexible Antenna
150/300/450/900MHz
7.9" (20cm) Long
BNC Connector
|
BK Precision AT 21 - Right Angle Telescoping Antenna, BNC Connector
AT 21 Right Angle Telescoping Antenna, BNC Connector
|
BK Precision AT 3 - Rubber Broadband Antenna
Rubber Broadband Antenna
150/300/400/900/1200MHz
7" (18cm) Long
BNC Connector
|
BK Precision ATR-2485 -RS 232 to RS 484 Adaptor
RS 485 Adaptor to connect multiple power supplies together on one COM port
|
BK Precision BC 2650 - 120V, 60Hz AC Adapter for model 2650/2658
AC adapter for models 2650 & 2658. The BC 2650 accepts 100 to 240VAC, 50/60Hz and outputs through it pin jack a 5V/4A DC voltage to power the 2650 & 2650.
|
BK Precision BE 9 - Power Adapter, 9V DC 100mA
Power Adapter, 9V DC 100mA
UL & cUL Listed
Barrel Jack Dimensions: 11mm long, 3mm diameter, 1mm internal diameter
|
BK Precision BE 12 -AC Adapter, 9VDC/300mA, Center +
AC Adapter, 9VDC/300mA, Center + UL & CSA Listed Barrel Jack Dimensions: 12mm long, 5mm diameter, 2mm internal diameter
|
BK Precision BP 10 - 600mAH NiCd Battery Pack 4xAA
600mAH NiCd Battery Pack 4xAA
|
BK Precision BP 2650 - Ni-MH Battery Pack for model 2650/2658
Replacement battery for models 2650 & 2658. A fully charged battery has an approximate operation time of 100 minutes (with back light off).
|
BK Precision 9V, Ni-MH Rechargeable Battery for 2880B and 2890A 2880B -
9V, Ni-MH Rechargeable Battery for 2880B and 2890A
|
BK Precision CC 12 - DB 9 to Molex Cable
This interface cable allow 490B users to connect their "CR adapters" to their 490B (CR adapters were used with models 467, 470, 480 & 490)
|
BK Precision CC-21 - BNC Breakout to Alligator Clips
Standard BNC to Alligator clips test leads.
50 ohm impedance
RG58C/u cable
500Vrms voltage rating
40" cable length
|
BK Precision CC-25 - BNC / N Adapter Kit
This kit contains the most popular In Series and Between Series BNC and N type adapters. Solve your hookup problems easily. Bodies are brass, nickel plated with gold plated center contacts.
Nine BNC and N type adapters
50 ohm impedance
500Vrms Rating
|
BK Precision CC265 - Deluxe Spectrum Analyzer Accessory Kit (2650/2658)
Deluxe Accessory Kit for RF & Microwave Spectrum Analyzers: Model CC265 Deluxe Spectrum Analyzer Kit provides a complete range of high quality coaxial adapters and cables for Spectrum Analyzer applications. This kit contains just the right mix of high performance accessories for every day testing as well as for instrument performance verification and calibration work. Selected adapters are Deluxe BNC or N Type products. These high quality components easily meet or exceed the instrument manufacturer’s recommended accessories specifications. All kit components feature precision machined interfaces, 50ohm impedance and low VSWR to ensure accurate and repeatable measurements. The kit is provided in a convenient foamlined case for easy component selection and storage.
Features:
Convenient interconnection kit
BNC & N Type 50ohm Connectors
Instrument Grade Adapters
Gold plated center contacts
Storage case
Applications:
Production Test Stations
R&D Labs
Service & Repair Facilities
Calibration Services
RF Field Testing
|
BK Precision CP 3 - AC/DC Clamp Accessory for DMMs
Converts any DMM to a current clamp
Measures current without disconnecting circuit under test
Measures to 400A DC/AC
Outputs 1mV per Amp, operates on 2V range of any DMM
|
BK Precision CR XA -Universal Adapter
This adapter can be used to interface a model 467, 470, 480, 490 & 490B (CC 12 cable required to interface CR XA adapter with model 490B)
|
BK Precision CT 2701 - Coaxial Adapter Kit for model 2650/2658
The CT 2701 coaxial connector adapter kit provided convenient solutions to most interconnection needs. The Universal Coaxial Adapter Kit, with its 6 universal adapters, allows assembly of hundreds of different coaxial adapters; in-series and between series. All pieces are machined brass with Teflon dielectrics and gold plated center contacts. Whether field service or bench, this kit provides an easy solution to coaxial connection requirements.
24 Coaxial Connectors; 6 Universal Adapters
Gold plated center contacts
Frequency Range: DC to 1GHz
VSWR <1.2:1 @ 1GHz (300MHz mini-UHF)
Insertion Loss: <1dB @ 1GHz
Convenient 6” x 5” Black Zipper Case
|
BK Precision FP 6 - Flexible Lead Sets (models 510, 510A 520B & 520C)
Specialized test lead set for B+K Precision semiconductor testers. Three conductor lead with 4mm banana plugs to mini-IC test clips.
3 conductors
Yellow, Green and Blue
30" (76cm) length
|
BK Precision IT E131 - RS 232 Interface Kit 1785B, 1786B, 1787B & 1788
RS 232 Interface Kit 1785B, 1786B, 1787B & 1788
|
BK Precision IT E132 - USB Interface Kit 1785B, 1786B, 1787B & 1788
USB Interface Kit 1785B, 1786B, 1787B & 1788
|
BK Precision KC 01 - 4 Wire Test Leads with Kelvin Clips
4 Wire Test Leads with Kelvin Clips
|
BK Precision LC 210A - Oscilloscope and Spectrum Analyzer Carrying Case
Made in the U.S.A.
Light weight, durable Cordura nylon
Protects your instruments
Room to hold your test leads
Approximate Internal Dimensions: 15 x 7.5 x 17.5" (381x 191 x 445mm)
|
BK Precision LC 24 - Mini-Pro DMM Carrying Case
Made in the U.S.A.
Light weight, durable Cordura nylon
Protects your instruments
Room to hold your test leads
Approximate Internal Dimensions: 3.75 x 1.5 x 6.75" (95 x 38 x 171mm)
|
BK Precision LC 2650 - Soft Carrying Case for models 2650/2658
Leather textured carrying case with strap to carry and protect model 2650.
|
BK Precision LC 28A - Meter Carrying Case
Made in the U.S.A.
Light weight, durable Cordura nylon
Protects your instruments
Room to hold your test leads
Approximate Internal Dimensions: 4.625 x 2.5 x 7" (117 x 64 x 178mm)
|
BK Precision LC 29B - DMM Carrying Case
Made in the U.S.A.
Light weight, durable Cordura nylon
Protects your instruments
Room to hold your test leads
Approximate Internal Dimensions: 4 x 2.5 x 8" (102 x 64 x 203mm)
|
BK Precision LC 33 - Clamp-On DMM Carrying Case
Made in the U.S.A.
Light weight, durable Cordura nylon
Protects your instruments
Room to hold your test leads
Approximate Internal Dimensions: 5 x 1.75 x 10.5" (127 x 44 x 267mm)
|
BK Precision LC 40 - Function Generator Carrying Case
Made in the U.S.A.
Light weight, durable Cordura nylon
Protects your instruments
Room to hold your test leads
Approximate Internal Dimensions: 11 x 5.5 x 12" (279 x 140 x 305mm)
|
BK Precision LC 760 -Aluminum Case with Foam Padding
Protective aluminum outer case
Interior foam padding
Cut out foam padding protects and holds meter and probes in places
Approximate Internal Dimensions (foam removed)
14.25 x 9.25 x 2” (wxhxd)
|
BK Precision PR 100A - PR100A x100 Probe f/All Scopes
250MHz Bandwidth
X100 Attenuation
48" (1.2m) Cable length
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
IEC61010-2-031
|
BK Precision PR 150 - 150 MHz 1x/10x Oscilloscope Probe
25/150MHz Bandwidth
X1/X10 Attenuation
48" (1.2m) Cable length
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
IEC61010-2-031
|
BK Precision PR 2000 - 200 MHz 2kV Oscilloscope High Voltage Probe
If the voltages you need to measure are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
X100 Attenuation
100M ohms / 5pF Input Impedance
200MHz Bandwidth
48" (1.2m) Cable Length
|
BK Precision PR 261 - 2615/20/25/30 Sniffer Probe
The PR-261 is the ideal toolkit for the investigation of RF electromagnetic fields. It is indispensable for EMI pre-compliance testing during product development, prior to third party testing. The set includes 3 hand-held probes with a built-in pre amplifier covering the frequency range from 1 0 kHz to 1000 MHz depending on probe type. The set includes one magnetic field probe, one electric field probe and one high impedance probe.
0.1MHz to 1GHz Frequency range (lower frequency limit depends on probe)
Output impedance 50ohms
Input capacitance 2pF (high impedance probe)
Max input level +10dBm
|
BK Precision PR 26M - Magnetic Field Probe for model 2650/2658
The model 2650 is capable of precisely measuring the magnetic field distribution on a LSI or a printed circuit board using magnetic field probe PR 26M. As the magnetic field detection portion of PR 26M is of a shielded loop structure that adopts glass ceramic multi-layer board technology of excellent high frequency characteristics, it is possible to take a measurement at high reproducibility by detecting magnetic field components only. The measuring frequency range is a broad as 10MHz to 3GHz, and the measured value is calibrated in the instrument.
|
BK Precision PR 28A -40kV High Voltage DMM Probe
If the voltages you need to measure are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
40,000VDC or 20,000Vac Max input voltage
X1000 Attenuation
1000M ohms Input Impedance
60Hz Bandwidth
48" (1.2m) Cable Length
.
|
BK Precision PR 32A - RF Detect/Demodular Probe
All purpose demodulator probe, usable with most oscilloscopes. Features light weight design and 48" (1.2m) coaxial cable.
100KHz to 950MHz Bandwidth
+3dB Accuracy
200V Max input voltage
50VeffHF Voltage
250mV Actuating voltage
5pF Input capacitance
|
BK Precision PR 33A -10:1/Direct 90 MHz Scope Probe
15/90MHz Bandwidth
X1/X10 Attenuation
48" (1.2m) Cable length
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
IEC61010-2-031
|
BK Precision PR 37AG - PR 37AG Deluxe 10:1 Gray Probe
Grey colored probe body
6/150MHz Bandwidth
X1, X10 & REF Switchable attenuation
48" (1.2m) Cable length
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
IEC61010-2-031
|
BK Precision PR 37AR - PR 37AR Deluxe 10:1 Red Probe
Red colored probe body
6/150MHz Bandwidth
X1, X10 & REF Switchable attenuation
48" (1.2m) Cable length
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
IEC61010-2-031
|
BK Precision PR-50 - Oscilloscope Probe Set, 3 pieces - x1/x100/Switchable
If you need a complete range of probe attenuation, then this is the kit for you. It contains three probes
x1, x100, and x1/x10 switchable. They are of the same high quality as B+K Precision standard probes but in one convenient kit. Each probe includes a full accessory offering with Sprung Hook, Replacement Tip, Ground Lead and BNC Adapter. All probe are compliant to IEC61010-2-031.
|
BK Precision PR-55 - High-Voltage Oscope Probe, 10kV, 50MHz
If the voltages you need to measure are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.
X1000 Attenuation
100M ohms / 1pF Input Impedance
50MHz Bandwidth
80" (2.0m) Cable Length
|
BK Precision PR-60 - Active Differential Probe, x10/x100
Allows safe and accurate floating measurements with your standard analog or digital oscilloscope. Switchable between x10 and x100 attenuation. Unit includes black and red probes and protective rubber jacket.
|
BK Precision PT 2650 - Printer for model 2650/2658
With the PT 2650 you can print hard copies of screen images. Printing begins when the “PRINT” key is pressed. The printer can either be operated by an AC adaptor or four AA batteries. The operating time when powered by alkaline batteries is approximately 30 minutes (when used continuously), which makes it possible to produce about 80 hard copy screen images. The PT 2650 comes with one roll of paper. Order part number PX 2650 for an additional ten rolls of thermal paper.
|
BK Precision PX 2650 - Roll Paper for PT 2650 (10 Rolls)
PX 2650 is ten rolls of 80mm wide thermal paper for use with PT 2650.
|
BK Precision TL 1 - Sheathed Test Lead Set
Economical replacement test leads. TL-1 has safety shrouded banana plugs
|
BK Precision TL 130A - General Purpose DMM Kit
General Purpose DMM Kit
|
BK Precision TL 2A - Deluxe Test Lead Set
IEC61010 1000V CATIII Rating Silicone Lead Wire length 60" (1.5m) Black Alligator Clip included Threaded tips fits TL-3 Accessory kit items
|
BK Precision TL 3 - Tip Kit Accessories for TL 2A
Threaded accessories to fit TL-2A probes
Black and Red pairs (except for alligator clip) Alligator clip, Red only Spring hook clips 4" Sharp extension tips to reach tight test points No. 10 Spade lugs
|
BK Precision TL 30 - 30A Hook-up Cable Set
#10 Spade Lug to Large Battery Clips 30A rating Black and Red pair 30" (0.75m) length
|
BK Precision TL 4 - Universal Test Lead Set
Economical replacement test leads. TL-1 has safety shrouded banana plugs. TL-4 has un-shrouded banana plugs. 1500V 3A ratings PVC lead wire, 40" (1.0m) Black and Red Alligator clips
|
BK Precision TL 5A - 5A Hook-Up Cable Set
4mm Banana plug to alligator clip 5A rating Black and Red pair 40" (1.0m) length
|
BK Precision TL 8 - Tweezer Test Lead (Surface Mount)
Two conductor leads 400V rms, 1A
|
BK Precision TL 830 - 810-875 3" Plug to Clip Test Leads (red/blk)
810-875 3" Plug to Clip Test Leads (red/blk)
|
BK Precision TL 889A - Kelvin Clip to four BNC Lead
Kelvin Clip to four BNC Lead
|
BK Precision TL 9110 - Do It Yourself Solderless Un-Sleeved Banana Plug Kit
Insulated in-line plug for wire assembly. Attach wire using solderless screw then twist plug into the insulator.
Materials: Body: Polyamide (Nylon); Plug: Brass, Nickel Plt; Contact: BeCu, Nickel Plt
Kit contains a Red, Green and Black assembly
|
BK Precision TL 9120 - 50cm Stacking Retractable Sleeve Plug Output Cable Kit
Added safety and protection when standard jack connections are encountered. Clear covering sleeve retracts as you plug into the jack. Banana plug includes a Red plastic insulation tip for added protection.
Materials: Body: Polyamide (Nylon); Contact: Brass, Nickel Plt.
Banana Contact: BeCu, Nickel Plt.
Kit contains a Red, Green and Black cable
.
|
BK Precision TL 9160 - 150cm Stacking Retractable Sleeve Plug Output Cable Kit
Added safety and protection when standard jack connections are encountered. Clear covering sleeve retracts as you plug into the jack. Banana plug includes a Red plastic insulation tip for added protection.
Materials: Body: Polyamide (Nylon); Contact: Brass, Nickel Plt.
Banana Contact: BeCu, Nickel Plt.
Kit contains a Red, Green and Black cable
|
BK Precision TL LCR - Test Leads for 875B, 878, 878A, 879, 890 (Sheathed)
Includes one red and one black lead
5” Long sheathed banana to alligator clip
Short length allows for accurate component measurements
|
BK Precision TL-50 - Maxi-Pro DMM Kit
Complete accessory kit for all your testing needs. Includes soft, flexible silicone lead wire easy movement and Tri-Fold Velcro Pouch for convenient storage. All components compliant to IEC61010-2-031 Silicone lead wire length 60" (1.5m) Tri-fold Velcro Pouch
|
BK Precision TL08C - 4-Wire Kelvin Test Leads with clip (model 885 & 886)
4-Wire Kelvin Test Leads with clip (model 885 & 886)
|
BK Precision TL885A - Tweezer SMD Probe for models 885 & 886
Tweezer SMD Probe for models 885 & 886
|
BK Precision TL885B - 4-wire Test Lead for models 885 & 886
4-wire Test Lead for models 885 & 886
|
BK Precision TL885D - 885 & 886 Shorting Bar
885 & 886 Shorting Bar
|
BK Precision TLFG - Function Generator Test Leads Set
General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.
|
BK Precision TLPS - Power Supply Test Leads Set
New accessory kit combines safety and functionality. The highly flexible silicone jacked test leads feature a retractile sheathed banana plug to connect to the Power Supply and a fixed sheath banana plug to protect the user. A complete selection of accessories are included -
large alligator clips, standard alligator clips, spade lug and banana plug adapters -
to make your connects easier. For Power Supplies with remote sensing capability, a ready-made lead set also included.
|
BK Precision TP 29 - Bead Probe, Standard, -50 to 200 C
Bead Probe, Standard, -50 to 200 C
|
BK Precision TP 3 - Bead Probe, Hi-Temp, -40 to 480 C
Bead Probe, Hi-Temp, -40 to 480 C
|
BK Precision TP-A - K-Type Transition Temperature Adapter for model 2890
K-Type Transition Temperature Adapter for model 2890
|
