Extech Instruments Environmental Testers

Extech Instruments 392050 - Penetration Stem

Features:

• Temperature range: -58 to 302°F (-50 to 150°C)
• Basic Accuracy of 2°F or 1°C
• 0.1° resolution to 199.9; 1° over 200°
• ON/OFF switch saves battery life
• Auto power off after 1hr of non use

Specifications:

Extech Instruments 392052 - Flat Surface Stem

Features:

Specifications:

Extech Instruments 392065 - T Bar Stem Thermometer

Features:

• 4.9" (124mm) stainless steel probe
• 0.35" (9mm) LCD display
• ON/OFF switch saves battery life
• Temperature: -58 to 302°F (-50 to 150°C); ±2°F/1°C accuracy, 0.1°/1° resolution
• Weight: 0.6oz (17g), 0.8oz (23g) with plastic sheath
• Complete with plastic protective sheath with pocket clip and 1.5V button battery

Specifications:

Extech Instruments 392085 - Pocket Thermometer

Features:

• Audible alarm alerts user when pre-set max or min temperature is reached or exceeded
• Display Hold function freezes temperature reading on display
• Ranges: -58 to 302°F (-50 to 150°C)
• 0.1° resolution from -19.9 to +199.9° 1° over 200°
• Accurate to ±1.8°F from -58 to 212°F (±1°C from -50 to 100°C)
• Durable 2-1/2" stainless steel probe with 20" cable
• Complete with wallet style case, stainless steel probe, and 1.5V button battery

Specifications:

Extech Instruments 39240 - Waterproof Thermometer

Features:

• 2.75" (70mm) Stainless steel stem
• °C/°F switchable ranges of -40 to 392°F (-40 to 200°C)
• MAX/MIN recall of high and low temperatures
• Hold and Auto Off features
• Digital display with 0.1° resolution
• Dimensions: 5.9 x 0.8 x 0.7" (150 x 20 x 18mm);
• Weight: 0.7oz (20g)
• Complete with one LR44 button battery and protective cover

Specifications:

Extech Instruments 39272 - Pocket Fold up Thermometer with Adjustable Probe

Features:

• Wide °C/°F switchable temperature range -58 to 572°F (-50 to 300°C)
• Fold up probe 4.5" (114mm) adjusts from 0° to 180° for best measurement and viewing angle
• Large LCD display with 0.1 degree resolution
• Auto power off after 1 hour or when probe is placed in stored position
• Data Hold and Min/Max recordings
• Fast response time - one second under normal conditions
• Complete with wrist strap and one AAA battery

Specifications:

Extech Instruments 401012 - Indoor/Outdoor Temperature Alarm

Features:

• Large 1.5" LCD displays indoor/outdoor temperature simultaneously from -58 to 158°F, resolution 0.1°F and accuracy to ±1.8°F
• Single Point Alarm (external sensor): set to alarm when temperature is above HI SET or below LO SET point
• Dual Point Alarm (external sensor): set to alarm when temperature is either outside of or within two setpoints
• Audible alarm and Red/Green LED indication for 5 seconds every minute when setpoint(s) is reached

Extech Instruments 401014 - Big Digit Indoor/Outdoor Thermometer

Features:

• Large LCD displays 1" (25mm) digits for indoor/outdoor temperature
• Indoor Range: 14 to 140°F (-10 to 60°C)
• Outdoor Range: -58 to 158°F (-50 to 70°C) ±1.8°F /1°C accuracy; 0.1°F/°C resolution

Specifications:

Extech Instruments 401021 - Foot Candle Light MultiMeter Adaptor

Features:

• Three ranges (5% accuracy):
• 0 to 5,000Fc
• 1mV/Fc or Lux output
• CE approved .

Specifications:

Extech Instruments 401025 - Foot Candle/Lux Meter

Features:

• Accurately displays light level in terms of Fc or Lux over three ranges
• Select fast (1 second) or slow (2 seconds) response time
• Analog output of 1mV per count for capturing readings to a recorder

Specifications:

Extech Instruments 403125 - Light Probe Meter

Features:

• Backlit display to view in dimly lit areas
• Remote light sensor on 59" (1.5m) cable conveniently mounts on top of meter for one hand operation and safe storage
• Data hold and Peak hold
• Optional analog output cable 403999 allows mV analog output for recording measurements

Extech Instruments 407026 - Heavy Duty Light Meter with PC Interface

Specifications: 

Extech Instruments 407113 - Heavy Duty CFM Metal Vane Anemometer

Features:

• Display Air Flow (CFM) or Air Velocity plus Temperature
• Air Flow displayed in 3 modes: - Instantaneous value - Up to 20 point average or - 2/3 flow value
• Record and Recall MIN, MAX
• Data Hold plus Auto power off
• Built-in RS-232 PC Interface

Specifications:

Extech Instruments 407119 - Heavy Duty CFM Hot Wire Anemometer

Features:

Specifications:

Extech Instruments 407123 - Heavy Duty Hot Wire

Features:

• Telescoping probe is ideal for measuring in HVAC ducts and other small vents; extends up to 4ft (1.22m) long
• Super large 1.4" (36mm) dual LCD display
• Min/Max, Data Hold

Specifications:

Extech Instruments 407730 - Digital Sound Level Meter

• ±2dB accuracy with 0.1dB resolution
• A+C weighting
• AC analog output
• Record Max/Min values over time
• Utilizes 0.5"(12.7mm) electret condenser microphone
• 40 to 130dB measuring range

Specifications:

Extech Instruments 42270 - Temperature/Humidity Datalogger

Features:

• Records Relative Humidity and Temperature in storage containers, shipping vans, freezers and more
• Logs data for days, weeks or months - up to 1 year battery life
• Multiple Dataloggers can be programmed and data downloaded from one single docking station.
• Programmable sampling rate from 1 second to 2 hours
• Program the logger, analyze and store data using Windows® 95/98/2000/NT/ME/XP compatible software
• View both humidity and temperature on LCD display

Specifications:

Extech Instruments 42275 - Temperature/Humidity

Features:

• Records Relative Humidity and Temperature in storage containers, shipping vans, freezers and more
• Logs data for days, weeks or months - up to 1 year battery life
• Multiple Dataloggers can be programmed and data downloaded from one single docking station
• Programmable sampling rate from 1 second to 2 hours
• Program the logger, analyze and store data using Windows 95/98/2000/NT/ME/XP compatible software
• View both humidity and temperature on LCD display

Extech Instruments 42276 - Temperature/Humidity Datalogger Programmer with Printer

Features:

• Self standing battery operated programming unit and printer - eliminates the need for a PC
• Datalogger module records Relative humidity and temperature in storage containers, shipping vans, freezers and more
• Datalogger transfers data to programmer
• Programming is performed through the 5 button control panel and integral LCD display
• Print numerical data or graphs on thermal paper
• Portable size is packaged in an ABS plastic case

Specifications:

Extech Instruments $2500 - Small IR Thermometer

Features:

• Built-in laser pointer identifies target area
• Backlighting illuminates display for taking measurements at night or in areas with low background light levels
• Automatic Data Hold when trigger released
• Fixed 0.95 emissivity covers 90% of surface applications
• Auto power off

Specifications:

Extech Instruments 42510 - Small Wide Range IR Thermometer

Features:

• Adjustable High/Low setpoints with audible alarm alerts user when temperature exceeds the programmed setpoints
• Built-in laser pointer identifies target area
• Backlighting illuminates display for taking measurements at night or in areas with low background light levels
• Adjustable emissivity for better accuracy on different surfaces
• Compact thermometer measures temperature from -58 to 1200°F (-50 to 650°C) with 0.1° resolution up to 199.9°
• 12:1 distance to target ratio
• Data Hold and Min/Max
• Overrange indicator
• Auto power off
• Complete with 9V battery and pouch case

Specifications:

Extech Instruments 42515 - IR Thermometer Plus Type K Input

Features:

• Wide temperature range for IR temperature and type K thermocouple measurements
• Automatic emissivity adjustment (for temperatures 212°or higher)
• Memory stores up to 20 readings
• Large LCD display with bright backlight for easy-to-read measurements and programming parameters
• Laser pointer provides better aim and accuracy
• Auto-hold activates when the measurement trigger is released
• Adjustable high/low alarm alerts user visually and audibly when the temperature exceeds programmmed limits.
• MAX/MIN/AVG/DIF features display highest, lowest, average, and MAX minus MIN values
• Data Hold, Auto power off with disable function, low battery indication
• Switches built into handle allow for °C/°F display selection, auto power off defeat, and alarm on/off control
• Complete with 9V battery, type K thermocouple sensor (-4 to 482°F/-20 to 250°C), and carrying case

Specifications:

Extech Instruments 42529 - IR Thermometer

Features:

Specifications:

Extech Instruments 42530 - Wide Range IR Thermometer

Features:

• Built-in laser pointer identifies target area
• Backlighting illuminates display for taking measurements at night or in areas with low background light levels
• Audible and visible overrange indicators
• Automatic Data Hold when trigger released

Specifications:

Extech Instruments 42540 - High Temp IR Thermometer

Features:

• Widest temperature range from -58° to 1400°F (-50 to 760°C)
• Built-in laser pointer identifies target area
• High 12 to 1 distance to target ratio measures smaller surface areas at greater distances
• Backlighting illuminates display for taking measurements at night or in areas with low background light levels
• Automatic Data Hold

Specifications:

Extech Instruments 42542 - High Temp IR Thermometer

Features:

• Automatic Data Hold when trigger released
• Adjustable high/low alarm alerts user visually and audibly when temperature exceeds programmed limits accuracy on different surfaces
• High Temperature range from -58° to 1832°F (-50 to 1000°C)
• Auto power off
• 30 to 1 distance to target ratio measures smaller surface areas at greater distances
• MIN/MAX/AVG/DIF features display highest, lowest, average, and MAX minus MIN values
• Large backlit display allows for taking measurements at night or in areas with low background light
• Laser pointer identifies target area
• High resolution of 0.1º up to 199.9º
• Complete with 9V battery and hard carrying case

Specifi

Extech Instruments 42545 - High Temp IR Thermometer

Features:

• High and low alarm set points
• Built-in laser pointer identifies target area
• Backlighting illuminates display for taking measurements at night or in areas with low background light levels
• High resolution of 0.1° up to 199.9°
• Adjustable emissivity
• Wide temperature range from -58 to 1832°F (-50 to 1000°C)

Specifications:

Extech Instruments 445580 - Humidity Meter

• Simultaneous display of Temperature (°C/°F) and Relative Humidity
• Max/Min and Data Hold
• Built-in self calibration utility allows for field calibrations using optional Relative Humidity calibration bottles
• Includes meter with pocket clip and 3V lithium battery

Specifications: 

Extech Instruments 445815 - Hygro-Thermometer with Dew Point

• In summertime, identifies and warns when conditions for mold growth exist
• In wintertime, identifies and warns when low humidity conditions for static electricity exist
• Remote probe allows for measurements behind walls or in difficult to access locations
• Air temperature and dew point temperature indicate where condensation may occur
• Monitor conditions in laboratories, storage areas and other controlled environment settings
• Ideal solution when traceable ISO calibrations are required by operating standards

Specifications: 

• %RH audible and visual alarm alerts when humidity exceeds set limit
• Displays Dew Point temperature
• Rear calibration adjustment pot for Humidity and Temperature
• Probe clips onto meter or extends on 18" (457mm) cable
• Max/Min with reset function
• Humidity: 10 to 99%
• Temperature: 14 to 140°F (-10 to 60°C)
• Basic Accuracy: ±4%RH; ±1.8°F/1°C
• One year warranty

Extech Instruments 451104 - Vane Thermo-Anemometer

Features:

• Air velocity and temperature displayed on large multi-function LCD
• Up to 2-hour air velocity averaging for measurements
• Built-in rotary vane sensor for one hand operation
• Data hold and Auto power off Min/Max
• RS-232 interface for capturing data directly on a PC

Specifications:

Extech Instruments 451112 - Big Digit Thermo-Anemometer

Features:

• High accuracy via low friction ball bearing vane wheel on 39" (1m) cable
• Utilizes a Type K sensor for temperature measurements
• Data hold
• Ideal when reaching into an air duct or other HVAC applications

Specifications:

Extech Instruments 451126 - CFM Vane Anemometer Datalogger

Features:

Specifications:

Extech Instruments 45118 - Mini Thermo-Anemometer

Features:

• Display Air Velocity and Temperature or Windchill
• Selectable averaging function of 5, 10, or 13 second intervals
• Fold up protective housing extends to 9" (229mm) for better reach
• Tripod mount
• Data Hold with Auto power off

Specifications:

Extech Instruments 451181 - Datalogging/Printing

Features:

• Simultaneously measures and displays Air Velocity, Temperature, Humidity, Wet Bulb, plus calculates CFM/CMM
• Manually logs 99 readings or setup time intervals for automatic logging (2400 points)
• Datalogger date/time stamps and stores data for later recall, printing or downloading to a PC
• Thermal printer prints air velocity, temperature, humidity, wet bulb, and CFM data with date and time stamp
• Backlit display for operating in dimly lit areas
• Auto Power Off
• RS-232 PC interface with Windows® 95/98/NT/2000/ME/XP compatible software to analyze data on PC
• Complete with vane sensor with 4ft (120cm) cable, software and cable, 4 AA batteries, one paper roll, and carrying case

Specifications:

Extech Instruments 45158 - Mini Thermo-Anemometer + Humidity

Features:

• Display air velocity and either Relative Humidity, Dew Point, Temperature or Windchill
• Selectable averaging function of
• 5, 10, or 13 second intervals
• Fold up protective housing extends to 9" (229mm) for better reach, Tripod mount
• Data Hold with Auto power off
• Water resistant housing floats

Specifications:

Extech Instruments 45160 - 3-in-1 Humidity Temperature and Airflow Meter

Features:

• Simultaneously displays Temperature and Air Velocity or Relative Humidity
• Type K input socket for high temperature measurements to 2372°F (1300°C) using optional (TP870) Type K thermocouple
• Min/Max, Data hold, Auto power off with disable feature
• Built-in low friction vane wheel improves air velocity accuracy
• Thin-film capacitance humidity sensor for fast response

Specifications:

Extech Instruments AN200 - CFM/CMM Thermo-Anemometer & IR Thermometer

Features:

• CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 536°F (280°C) with 8:1 distance to spot ratio and Laser Pointer
• Simultaneous display of Ambient Temperature and Air Flow or Air Velocity
• Up to 8 easy to set Area Dimensions are stored in the meter's internal memory
• 20 point average function for Air Flow
• Super large LCD Backlit Display
• 3% velocity accuracy via low friction 2.83" D (72mm) ball bearing vane wheel on 3.9 ft. (120cm) cable
• Data hold and MIN/MAX
• Auto Power off
• Completer with vane sensor with 3.9 ft. (120cm) cable, 9V battery, protective rubber holster, and carrying case

Specifications:

Extech Instruments AN400 - Cup Thermo-Anemometer

Features:

• Rotating cups provide accurate air velocity measurements
• Wide range air velocity measures m/s, ft/min, km/hr, and knots
• Dual LCD digital display of Air Velocity and Temperature
• Record Max and Min values
• Datalogger stores up to 100 readings
• Water resistant housing
• Complete with four AAA batteries

Extech Instruments EA15 - Thermocouple Datalogging Thermometer

Features:

• Dual input accepts Types J, K, E, T, R, S, and N thermocouples
• Built-in datalogger stores up to 8800 data sets
• RS-232 port to transfer data to PC for analysis
• Real Time Clock
• Includes Windows® 95/98/NT/2000/ME/XP compatible software and cable
• Compact and rugged design features large backlit display
• Displays [T1 plus T2] or [T1-T2 plus T1] or [T1-T2 plus T2]
• Selectable units of °F, °C, K (Kelvin)
• Wide temperature range with 0.1°/1° resolution
• Timer function displays elapsed time plus the time when MIN and MAX readings are taken
• OFFSET key used for zero function to make relative measurements
• Data Hold function freezes reading on display
• Auto Power off to save battery life
• Low battery and overrange indication
• Records Max/Min readings for later recall
• Complete with built-in stand, protective holster, two Type K bead wire temperature probes (-4 to 482°F/-20 to 250°C), and 6 AAA batteries

Specifications:

Extech Instruments EA30 - Easyview Wide Range Light Meter

Features:

• Compact and rugged design with large display
• Widest range to 40,000Fc/ 400,000Lux is ideal for outdoor applications
• Additional features: Large display with bargraph, Relative function for zero or difference from reference value and Peak captures short light pulses to 100μSeconds
• Data Hold and Min/Max readings
• Auto power off, Zero function

Specifications:

Extech Instruments EA31 - Easyview Light Meter

Features:

• Compact and rugged design with large display
• Low range model measures to 2,000Fc/ 20,000Lux
• Data Hold and Min/Max readings
• Auto power off, Zero function

Specifications:

Extech Instruments EA33 - Easyview Light Meter with Memory

Features:

• Wide measurement range to 99,990Fc (999,900Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Auto Power off with disable feature
• Multiple point average function
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms
• Cosine and color corrected, CNS 5119 Class II
• Complete with built-in stand, light sensor and protective cover with 36" (0.9m) cable, protective holster, 6 AAA batteries, and carrying case

Specifications:

Extech Instruments EA80 - Indoor Air Quality Meter/Datalogger

Features:

Specifications:

Extech Instruments EZ20 - Flex IR Thermometer

Features:

Specifications:

Extech Instruments EZ30 - EzFlex Thermo-Anemometer

Features:

• Remote vane extends on 16" (406mm) gooseneck for easy access into hard to reach places
• Selectable air velocity units of ft/min, m/s, km/hr, mph, and knots
• Ideal when reaching into air duct or other HVAC applications
• 3% basic accuracy
• Type K sensor for temperature measurements
• Large easy to read 2000 count LCD display
• Data hold function allows user to freeze the displayed value
• Max hold retains highest reading in the display
• Auto power off and low battery indication
• Complete with battery and hard carrying case

Extech Instruments HD200 - Differential Thermometer Datalogger & IR Thermometer

Features:

• Datalogs up to 18,000 readings on each channel
• Display [T1, T2, T3(IR)] or [T1-T2] or [T1-T3] or [T2-T3]
• Differential T1-T2 display for HVAC/Superheat measurements
• Heavy Duty rugged double molded housing
• MAX/MIN/AVG and Data Hold
• Use IR Thermometer probe to measure non-contact surface Temperature up to 1022°F (550°C); 8:1 distance to spot ratio and Laser pointer
• User selectable 1°/0.1° resolution
• Triple LCD display (when IR probe is plugged in)
• USB port includes software
• Includes two Type K bead wire temperature probes (-4 to 482°F/-20 to 250°C), IR Thermometer probe, Windows® compatible software with USB cable, hard carrying case, and 9V battery

Specifications:

Extech Instruments HD300 - Thermo-Anemometer w/ IR Temperature

Features:

• InfraRed Thermometer measures remote surface temperatures to 932°F (500°C) with 30:1 distance to spot ratio and Laser pointer
• Simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions are stored in the meters internal memory for the next power on
• Large (9999 count) LCD backlit display
• 20 point average for air flow
• USB port includes software
• Includes Windows® compatible software with cable, vane sensor with 3.9ft (120cm) cable, hard carrying case, and 9V battery

Specifications:

Extech Instruments HD400 - Heavy Duty Light Meter

Features:

• Large backlit LCD display with 40-segment bar graph
• Wide range to 4,000Fc or 40,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10µS) captures highest reading
• Relative mode indicates change in light levels
• Min/Max and Data Hold
• Backlight for readings in low light levels
• Heavy Duty rugged double molded housing
• Built-in USB port

Specifications:

Extech Instruments HD450 - Heavy Duty Datalogging Light Meter

Features:

• Large backlit LCD display with 40-segment bar graph
• records in a continuous mode up to 16,000 readings and can manually store/recall up to 99 selected readings
• Wide range to 4,000Fc or 40,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10µS) captures highest reading
• Relative mode indicates change in light levels
• Min/Max and Data Hold
• Backlight for readings in low light levels
• Heavy Duty rugged double molded housing
• Built-in USB port

Specifications:

Extech Instruments IR100 - Mini IR Thermometer

Features:

• Wide temperature range from -31 to 446°F (-35 to 230°C)
• Economical mini size design for convenience
• Automatic Data Hold when measure button is released
• Max Hold or Min Hold
• Lock feature for continuous scanning
• Fixed emissivity covers 90% of surface applications
• Auto power off
• Complete with CR2032 3V battery

Specifications:

Extech Instruments IR201 - IR Thermometer

Features: