 Click to zoom |
3-phase sequence indicator plus MultiMeter with Frequency, Capacitance, and Temperature function Features: - Functions include Phase, AC/DC Voltage, Capacitance, Resistance, Frequency, Temperature, Continuity and Diode
- Phase indicator identifies clockwise or counter-clockwise wiring configuration via direction of arrow on display
- Type K temperature measurements to 752°F (400°C)
|
Click to zoom |
Features: - 250V, 500V, and 1000V test voltages
- Insulation Resistance to 2000MΩ
- Lo Resistance function for testing connections
- Lock Power On Function for hands-free operation
- Data Hold to freeze displayed reading
- One year warranty
|
Click to zoom |
Manual ranging Insulation tester for 250V, 500V, and 1000V test voltages Features: - Large easy to read analog display
- Three test voltages 250V, 500V, and 1000V
- Insulation Resistance to 400MOhm
- Lock Power On feature for extended test times
- Automatic discharge circuit
- Measures Continuity to 3Ohm, Resistance to 500Ohm, and AC Voltage to 600V
- Complete with test leads, 6 x AA batteries, and hard carrying case
|
Click to zoom |
The Extech 380353 has been Discontinued. The following are suggested alternatives with similar functions: Extech 380320 - Analog Insulation Tester
Extech 380360 - Digital Megohmmeter
380353 Features: - Three test voltages of 250V, 500V and 1000V
- Insulation Resistance to 400MΩ
- Fuse protected and automatic discharge circuit
- Test Lock for extended time tests
- 2mA short circuit current
|
Click to zoom |
Features: - Three test voltages of 250V, 500V and 1000V
- Insulation Resistance to 2000M Ohm
- Safety Power Lock enables "hands free" operation for 3 minute test
- Automatic discharge when safety "Press to Test" button is released
- Continuity measurements to 200Ohm and Voltage to 600VAC
|
Click to zoom |
Features: - 250V, 500V and 1000V test voltages
- Measure Insulation Resistance to 10GΩ
- Large LCD display with analog bargraph
- Lo ohms function for testing connections
- Automatic discharge of capacitive voltage charges
- AC/DC voltage measurement up to 999V
- Manual data record and read function (9 sets)
- Live circuit display warning and beeper
- Complete with carrying case, test leads, and 6 x AA batteries
- One year warranty
|
Click to zoom |
Features: - Datalogging function stores up to 16,000 readings with single store or a programmable rate of 1 to 65,000 seconds per sample
- Large dual 4000 count backlit LCD and fast 50 segment analog display
- Data Hold, Test Lock, Audible continuity, and Low Resistance functions
- Measure up to 600V AC
- RS-232 PC interface with Windows 95/98/NT/2000/ME/XP compatible software
|
Click to zoom |
5kV digital tester with real time voltage bargraph Features: - Four DC test voltages 0.5kV, 1kV, 2.5kV, 5kV
- Measure Insulation Resistance to 250GOhm
- Large LCD with real-time bargraph display of test voltage and voltage decay during discharge
- Microprocessor based with advanced safety features
- EnersaveTM feature to extend battery life
|
Click to zoom |
Features: - Measure Insulation Resistance to 500GΩ
- LCD display indicates test voltage, test duration and insulation resistance
- Measures insulation test voltages up to 10kV and insulation test time
- Automatic external live voltage warning
- High voltage applied warning buzzer
|
Click to zoom |
Wide Range Measurement up to 5kV with Insulation Resistance to 60GOhm Features: - Test Voltages of 500V, 1000V, 2500V, and 5000V
- Measure Insulation Resistance to 60GOhm
- Large 6000 count display with bargraph and backlight
- Polarization Index measurement (PI)
- Dielectric Absorption Ratio measurement (DAR)
- AC/DC Voltage measurement from 0 to 600V with Max/Min, Peak and Relative functions
- 1 to 15 minute timer function for IR measurements
- Resistance measurement
- Indication of output voltage and discharge voltage
- Auto-discharge function and voltage output warning function
- Autoranging, Auto Power off and battery check
- Complete with test leads, 8 x C batteries, AC adaptor, and heavy duty carrying case
|
Click to zoom |
Features: High accuracy and performance for low resistance measurements Large 0.7" (18mm) LCD 1999 count 4-wire cables with Kelvin clip connectors Manual zero display adjust Overrange indication Compact, durable field service
|
Click to zoom |
Portable Milliohm meter provides resolution to 100µO Features: - High accuracy and performance for low resistance measurements
- Large 0.7" (18mm) LCD 1999 count
- 4-wire cables with Kelvin clip connectors
- Manual zero display adjust
- Overrange indication
- Compact, durable field service
|
Click to zoom |
Features: 7 ranges for wide 20.00mΩ to 20.00kΩ low resistance measurements High resolution to 0.01mΩ 1999 count display with large 0.8" digits 4-wire test cable with Kelvin clip connectors Automatic zero Built-in comparator for Hi/Lo/Go resistance testing or selection Complete with 4-wire cables with Kelvin clip connectors and power cord
|
Click to zoom |
Benchtop meter provides resolutoin down to 0.01mO Features: - 7 ranges for wide low resistance measurements
- High resolution to 0.01mOhm
- 1999 count display with 0.8" digits
- 4-wire test cable with Kelvin clip connectors
- Automatic zero
- Built-in comparator for Hi/Lo/Go resistance testing or selection
|
Click to zoom |
Features: - Four terminal Kelvin measurements
- Over-temperature and over-voltage protection
- 5 ranges with 100μ .max resolution
- Large 2000 count LCD display
- Auto-Hold and Auto-Off features
- 20V test voltage
- Invalid test indicators prevent inaccurate measurements
- Built-in water resistant case with shoulder strap
- Complete with 8AA batteries, and 2 sets of test leads (4 wire with 4 alligator clips and 4 wire with 2 Kelvin alligator clips)
|
Click to zoom |
Compact, battery operated appliance tester for analyzing AC power loads Features: - Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
- True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
- Plug device to be tested directly into the Power Analyzer
- Max, Data Hold and Overload Protection
- Battery or AC adaptor provides line isolation
- Sampling (update) rate is 2.5 times/second
- Can be used for data acquisition when connected to PC
- Software included to download and store data to a PC
|
Click to zoom |
Compact, battery operated datalogging appliance tester for analyzing AC/DC power loads Features: - Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
- Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
- True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
- Plug device to be tested directly into the Power Analyzer
- Max, Data Hold and Overload Protection
- Battery or AC adaptor provides line isolation
- Sampling (update) rate is 2.5 times/second
- Software included to download and store data to a PC
|
Click to zoom |
Front (100W) and Rear (2000W) Universal Output Sockets Features: - Standby Power Measurement (10mW to 100W) for desktop and notebook PCs, LCD TVs, AC adaptor/chargers
- For testing products from 85 to 250VAC, 45 to 65Hz
- Standard Power Measurement:
- 100mW to 1000W (110V)
- 100mW to 2000W (220V)
- Power Quality Measurement (Watts, Power Factor, Voltage, Current, Harmonics)
- Cost Function calculates cost per day, month, and year
- 99 memory locations for preset voltage and frequency output settings
- User-programmable Over Current Protection
- Programmable through the built-in RS-232 interface
- Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
- Complete with AC power cord, RS-232 to USB cable and software
|
Click to zoom |
Four clamps for power measurements on single phase, 3-phase/3-wire or 3-phase/4-wire systems Features: - Large backlighting LCD display
- Displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage and current of the three phases)
- Clamp-on True RMS power measurements with software for Harmonics analysis
- Current measurements to 1000A and Voltage measurements to 600V
- Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets
|
Click to zoom |
Description: Power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems Features: - Large backlit LCD displays up to 35 parameters in one screen
- True RMS power measurements with Harmonics display (1-99th order)
- Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold
- Simultaneous Harmonics and Waveform display
- Measures Current and Voltage
- Datalogger records up to 52,428 records in single phase, 2 wire applications (17,476 in 3-phase 4-wire applications)
List Price: $3,099.00
Special Price: $2,999.00 | | | Add to Cart |
|
Click to zoom |
Power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems Features: - Large backlit LCD displays up to 35 parameters in one screen
- True RMS power measurements with Harmonics display (1-99th order)
- Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold
- Simultaneous Harmonics and Waveform display
- Measures Current and Voltage
- Datalogger records up to 52,428 records in single phase, 2 wire applications (17,476 in 3-phase 4-wire applications)
|
Click to zoom |
Description: Datalogging Power Analyzer (up to 30,000 sets of measurements) - Single phase, 3-phase/3-wire or 3-phase/4-wire systems
- Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
- Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
- Current measurements to 1200A and Voltage measurements to 600V
- MWH, MVAh, MVARh energy measurements
- Adjustable CT ratio (1 to 600) and PT ratio (1 to 1000)
- Automatically logs up to 30,000 sets of measurements with 2GB SD memory card
- User-programmable sampling time from 2 to 7200 seconds
List Price: $2,099.00
Special Price: $1,989.00 | | | Add to Cart |
|
Click to zoom |
Discontinued Product - Replaced by 382252 Features: - 3-1/2 Digit (1999 count) multifunction LCD with Data Hold
- Measure Earth Resistance in three ranges (20/200/2000)
- 2mA (800Hz) Test Current and Frequency
- 0 to 200VAC (40 to 500Hz) AC Earth Voltage/Frequency
- Auto Power Off and 3 minute Timer
- Overload Protection
- Open circuit, overrange, and low battery indications
- Complete with test leads, auxiliary earth bars, heavy duty case, and six 1.5V AA batteries
|
Click to zoom |
Includes all hardware necessary to measure earth ground in 3 ranges from 20 to 2000Ohm Features: - Large dual display with backlight
- Test Hold function for easy operation
- Automatic Zero adjustment
- AC/DC Voltage, Resistance, and Continuity
- Auto Power off, Overrange and low battery indication
- Complete with test leads, 2 auxiliary earth bars, carrying case, protective rubber holster and six 1.5V AA batteries
|
Click to zoom |
Features: - Autoranging ground resistance easurements from 0.03Ω to 1500Ω with 0.02Ω resolution
- True RMS AC Leakage current range of 0.2mA to 15.00A
- 0.9" (23mm) Jaw size for large ground rods
- Simplifies ground resistance measurements on multiple point ground systems
- Verification resistors confirm accuracy of meter
List Price: $1,329.00
Special Price: $1,299.00 | | | Add to Cart |  |
|
Click to zoom |
Discontinued Product - No Replacement Non-contact and Contact detection of AC Voltage Features: - Contact AC Voltage: from 70 to 250VAC
- Non-contact AC Voltage: from 70 to 600VAC
- Continuity Check from 0 to 5M Ohms
- Self Test insures proper battery installation and bettery life
- Complete with two button batteries
|
Click to zoom |
Extech 40130 - Non-Contact Detection of AC Voltage from 100VAC to 600VAC
- For use on 50/60Hz circuits
- Tip fits into outlets or against wire insulation
- Flashing red LED light and push button ON/OFF Audible beeper indicator
- UL and CE approved; CAT III-600V
|
Click to zoom |
Features: - 1000V test voltage
- Insulation Resistance to 2000M?
- Large 3-1/2 Digit (1999 count) multifunction backlit LCD with Data Hold
- Two ranges with 2% basic accuracy
- Auto Hold and Auto power off
|
Click to zoom |
Features: - Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
- Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
- Also features voltage check function
|
Click to zoom |
Discontinued Product - Replaced by 480400 Features: - Tests phase orientation of three phase power sources
- Indicates phase orientation (clockwise or counter-clockwise) and whether each of three phases is live
- No battery required
|
Click to zoom |
Features: - Checks phase sequence and phase status
- Tests up to 600VAC and displays graphical phase orientation on the large LCD
- Double molded durable housing
- Easy to use alligator clips with wide jaws
|
Click to zoom |
Features:- Indicates rotation direction of the motor
- Determine rotation of a motor without contact
- LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
- Double molded durable housing
- Easy to use alligator clips with wide jaws
|
Click to zoom |
Features: - Quickly locate 110V to 125VAC Circuit Breakers and Fuses
- Variable Sensitivity adjustment to pinpoint correct circuit breaker
- Bright Red and Green LED´s indicates if receptacle is correctly wired or six fault conditions
- Push button GFCI test
- Audible and visual circuit breaker indication
- Convenient storage position for transmitter/receptacle tester
- Eliminates circuit interruptions
- Use on 110V to 125V AC circuits
- UL listed
- Dimensions: 8.5x1.5x2.25" (216x38x57mm) Weight: 5.9oz (167g)
- Complete with 9V battery for the Receiver
|
Click to zoom |
Handy Electrical Troubleshooting Kit with 5 Functions Features: - Circuit breaker finder with outlet/GFCI tester, continuity checker/wire tracer and AC voltage detector with flashlight in one convenient kit.
- Includes CB10 Circuit Breaker Finder with Sensitivity Adjustment:
- Quickly locate Circuit Breakers with audible and visual alert
- LED indicators determine if outlet is correctly wired and identify six fault conditions
- Push button GFCI test
- Includes CT20 Continuity Tester/Wire Tracer
- Continuity testing via bright flashing LED and loud pulsating beeper
- Remote probe with LED allows a single user to trace up to three cables
- Includes DV20 AC Voltage Detector/Flashlight
- Non-Contact Detection of AC Voltage from 100VAC to 600VAC
- Built-in bright LED flashlight with ON/OFF button
- Rugged, double molded housing
- Complete with convenient storage/carrying case
|
Click to zoom |
One person operation for wire and cable testing Features: - Local continuity checking is accomplished by a bright flashing LED and loud pulsating beeper
- Remote continuity with the use of the remote probe
- Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
- Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
- Great from Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.
|
Click to zoom |
Description: AC outlet load handling capabilities plus Outlet Tester functions Features: - AC Load Tester functions:
- Selectable loads of 12, 15 and 20 Amps
- Measures loaded and unloaded AC Line Voltage
- Calculates and displays % Voltage Drop and Line Impedance
- Displays Peak Line Voltage and Frequency
- Outlet Tester functions:
- Neutral to Ground Voltage
- Hot, Neutral and Ground Impedance
- GFCI Trip Time and Trip Current
- Open or Reversed wiring
- Complete with AC test cord
|
Click to zoom |
Locates current in hidden wires and cables Features: - Non-contact AC Current range is from 200mA to 1000A
- Locates current flow even where voltage detectors cannot work
- Detects through shielded wires, conduit, and metal circuit breaker or junction boxes
- Sensitivity adjustment for locating wires/conduit through walls
- Audible and visible indication
|
Click to zoom |
39" (1m) Non-Contact current detector (up to 1000A) Features: - Non-Contact Detection of AC Current from 200mA to 1000A
- Ideal for use on shielded wires or conduit behind walls, metal circuit breaker or junction boxes
- Telescoping probe extends to 36" (0.9m) with reach distance of 39" (1m)
- For use on 50/60Hz circuits
- Red LED light indicator and switch-controlled ON/OFF Audible beeper
- Sensitivity adjustment increases or reduces sensor trigger threshold
|
Click to zoom |
Non-contact detection of AC Voltage (600V AC) with built-in flashlight Features: - Non-Contact Detection of AC Voltage from 100VAC to 600VAC
- Rugged, double molded case
- Suitable for outlets or against wire insulation testing
- Red LED light indicator
- Built-in bright flashlight with ON/OFF button
|
Click to zoom |
Non-contact detection of AC Voltage (1000V AC) with built-in flashlight Features: - Non-contact detection of AC Voltage from 50 to 1000VAC
- For use on 50/60Hz circuits
- Rugged double-molded housing
- Tip fits into outlets or against wire insulation testing
- Red LED indicator light
- Built-in bright flashlight with On/Off button
- Compact size with pocket clip
|
Click to zoom |
Pocket size Non-Contact Volatge Detector with two selectable ranges Features: - Non-contact detection of AC Voltage in 2 ranges:
- 24 to 1000VAC
- 100 to 1000VAC
- For use on 50/60Hz circuits
- Audible and Visual voltage indication
- Built-in bright flashlight with On/Off button
- Rugged double-molded housing
- Tip fits into outlets or against wire insulation testing
|
Click to zoom |
Non-contact detection of AC Voltage with Sensitivity adjust Features: - Non-Contact detection of AC Voltage from 12VAC to 600VAC
- Sensitivity adjustment increases or reduces sensor trigger threshold
- Audible and visible voltage indication
- Self test function
|
Click to zoom |
Non-Contact Voltage Detector (1000V) with Built-In InfraRed Thermometer Features: - NCV (non-contact voltage detector) probe with integrated indicator light
- NCV Voltage Sensitivity 50 to 1000VAC (50/60Hz)
- Less than 1" detection range
- Built-in IR Thermometer for non-contact temperature measurements from -20 to 445°F (-30 to 230°C) with 0.1° resolution
- 9,999 count LCD displays temperature with selectable °F/°C internal switch
- Fixed 0.95 emissivity covers 90% of surface applications, 1:1 distance to target ratio
- Rugged double molded housing, compact size with pocket clip
- Complete with three LR44 batteries
- International Patent Pending
|
Click to zoom |
39" (1m) Non-Contact voltage detector (1000V AC) Features: - Non-Contact Detection of AC Voltage from 6VAC to 1000VAC
- Telescoping probe extends to 36" (0.9m) with reach distance of 39" (1m)
- For use on 50/60Hz circuits
- Red LED light indicator and switch-controlled ON/OFF Audible beeper
- Sensitivity adjustment increases or reduces sensor trigger threshold
|
Click to zoom |
Detects and pinpoints wide range Voltage and Current with Sensitivity adjust Features: - The only two-in-one current/voltage detector designed for electrical testing
- Non-Contact AC Voltage detection from 12V to 600VAC
- Non-Contact AC Current detection from 200mA to 1000A
- Sensitivity adjustments to increase or reduce sensor trigger threshold
- Current sensor detects current flow through shielded wires, conduit, and metal circuit breaker/junction boxes
|
Click to zoom |
Discontinued Product - No Replacement Computes cost of operation and stores power usage for analysis Features: - Monitor and record real time power usage of motors, pumps and appliances
- Internal memory stores up to 6 months of data at 1 minute intervals
- Transfer data to a PC using an SD card (not included)
- Windows® compatible software included for analysis and report generation
- Display line Voltage, Current, Frequency, Watts, VA and PF
- Displays ID, kWh and cost of operating the plugged in device
- Projects cost of operation per week, month and year
- Records Min/Max values for Voltage, Current, Active Power, Apparent Power and Power Factor
- Operates from 100V-125V; 50/60Hz; 12A max
|
Click to zoom |
Description: Measure earth ground in 4 ranges from 2 to 2000 Ohm Features: - 4-wire, 3-wire, and 2-wire testing
- Large dual line LCD
- Automatic I (current) and P (potential) spike check
- Test Hold function for easy operation
- Autoranging, Automatic Zero adjustment, Data Hold and Auto Power off
- AC Earth Voltage
- Overrange and low battery indication
- Complete with test leads with alligator clips, 4 auxiliary earth bars, hard carrying case, and eight 1.5V AA batteries
|
Click to zoom |
Description: Complete with 1200A 12" flexible current clamp probes Features: - Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
- Flexible clamp probes can be used for wrapping around bus bars and wire bundles
- Large backlighting LCD displays up to 35 parameters in one screen
- Clamp-on True RMS power measurements with on-screen Harmonics display
- Simultaneous display of Harmonics and Waveform
- Display of Waveform with Peak Values (1024 samples/period)
- Analysis of Total Harmonic Distortion (THD-F)
- Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
- Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)
- Graphic Phase diagram with 3-Phase system parameters
- 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
- Calculated Unbalanced Current through Neutral Line (In)
- Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
- Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
- Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case
|
Click to zoom |
Description: Complete with 3000A 18" flexible current clamp probes Features: - Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
- Flexible clamp probes can be used for wrapping around bus bars and wire bundles
- Large backlighting LCD displays up to 35 parameters in one screen
- Clamp-on True RMS power measurements with on-screen Harmonics display
- Simultaneous display of Harmonics and Waveform
- Display of Waveform with Peak Values (1024 samples/period)
- Analysis of Total Harmonic Distortion (THD-F)
- Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
- Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)
- Graphic Phase diagram with 3-Phase system parameters
- 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
- Calculated Unbalanced Current through Neutral Line (In)
- Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
- Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
- Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case
|
Click to zoom |
Description: Datalogging Power Analyzer (up to 30,000 sets of measurements) Features: - Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu
- Full system analysis with up to 35 parameters:
- V (phase-to-phase), V (phase-to-ground)
- A (phase-to-ground)
- KW / KVA / KVAR / PF (phase)
- KW / KVA / KVAR / PF (system)
- KWH / KVAH / KVARH / PFH (system)
- Phase angle
- Optional 200A, 1200A Current Clamps or 3000A Flexible Current Probes
- Adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio for high power distribution systems
- Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
- Wide sampling rate range (2 seconds to 2 hours)
- Built-in Clock and Calendar
|
Click to zoom |
Description: Tests up to 1000VAC with visual/audible indication Features: - 75 to 1000VAC input voltage with 45 to 65Hz frequency range
- LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
- Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
- Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
- Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
- Fully insulated alligator clips with wide jaws
- Low battery warning
- Complete with three built-in 30" test leads with large color-coded alligator clips, four AA batteries, and pouch case
|
Click to zoom |
Local & Remote non-contact Voltage Detection + Remote Light Detection This product is the winner of HKEIA 2009 Bronze Award Features: - Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
- Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
- Non-contact mid-run AC wiring identification without cutting into wires
- Lighting circuit identification using built-in light sensor
- Non-contact handheld voltage (NCV) detection
- External NCV probe can be used to identify wiring in hard-to-reach areas where the transmitting unit cannot fit
- AC Outlet Extender can be used to identify AC outlets
- Complete with transmitter, receiver, remote probe, 4 AAA batteries and case
|
Click to zoom |
Local & Remote non-contact Voltage Detection + Remote Light Detection This product is the winner of HKEIA 2009 Bronze Award Features: - Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
- Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
- Non-contact mid-run AC wiring identification without cutting into wires
- Lighting circuit identification using built-in light sensor
- Non-contact handheld voltage (NCV) detection
- External NCV probe can be used to identify wiring in hard-to-reach areas where the transmitting unit cannot fit
- AC Outlet Extender can be used to identify AC outlets
- Complete with transmitter, receiver, remote probe, 4 AAA batteries and case
|
Click to zoom |
Description: Precision meter provides resolution down to 1µOhm Features: - 6 ranges with 3 sub-ranges in each current range
- Measurement of resistive and inductive materials
- 5-Digit backlit LCD, PC interface
- Auto or Manual ranging, 10A maximum test current
- Store/Recall up to 3000 measurements
- Cable length measurement (feet or meters)
- Complete with 4-wire cables with Kelvin clip connectors, rechargeable Li-Polymer battery, AC adapter/charger, software and USB cable, and soft carrying case
|
Click to zoom |
Voltage, Continuity and Phase Tester with Flashlight Features: - LED AC Voltage Indication: 24V, 48V, 120V, 208V, 240V, 277V, 480V, 600V
- LED DC Voltage Indication: 6V, 12V, 24V, 36V, 48V, 110V, 220V, 400V
- Polarity detection with LEDs for positive and negative DC
- Continuity Test with audible tone
- Phase rotation test for motors
- Two handed operation for low impedance testing
- Built-in flashlight for testing in tight areas
- Voltage function operates without battery
- Rubberized double-molded IP64 housing
|
Click to zoom |
Voltage, Continuity and Phase Tester with Flashlight and backlit digital Display with bargraph Features: - Large backlit LCD display
- AC/DC voltage indication: 6V, 12V, 24V, 50V, 230V, 400V, 690V
- Polarity detection with LEDs for positive and negative DC
- Continuity Test with audible tone
- Phase rotation test for motors
- Two handed operation for low impedance testing
- Built-in flashlight for testing in tight areas
- Voltage function operates without battery
- Rubberized double-molded IP64 housing
|
