 |
Extech Clamp Meters |
 Click to zoom |
Discontinued Product - No Replacement Description: AC/DC Current measurements Features: - 3.3" (83mm) clamp jaw
- Two ranges: 0 to 200A & 0 to 2000A
- DC zero adjust; Outputs 1mV/A
- 2% basic accuracy
|
Click to zoom |
Full range MultiMeter functions with high resolution to 0.1µA/0.1mV Features: - AC/DC Current via clamp with 0.1A resolution
- Large jaw size for high Current measurements
- Duty Cycle function
- Large Backlit display
- Push button Zero adjust improves DC accuracy
|
Click to zoom |
Measures Watts, Current, and Voltage Features: - Large LCD with 40 segment analog bargraph
- Data Hold, Max/Min recall, Auto Zero (DC current), plus low battery indication
- Auto power off
|
Click to zoom |
Description: High resolution mini clamp with Voltage, Frequency, and Resistance Features: - 0.9" (23mm) jaw opening
- High resolution to 10mA AC/DC
- Voltage, Resistance, and Frequency
- Fast 40 segment bargraph
- One touch Auto Zero for DC Current measurements
- Min/Max, Data hold and Auto power off
|
Click to zoom |
Highest resolution (0.1mA) and accuracy at low currents Features: - Low AC/DC Current measurements with high resolution to 0.1mA AC and 1mA DC
- Voltage measurements using test leads
- Fast 40 segment bargraph
- One touch Auto Zero for DC Current measurements
- Min/Max, Data hold and Auto power off
|
Click to zoom |
Description: True RMS mini-clamp with high current resolution Features: - 0.9" (23mm) jaw opening
- True RMS measurements with 1mA AC resolution
- Non-contact Frequency measurements to 10kHz through the clamp jaws
- Fast 40 segment bargraph
- One touch Auto Zero
- Min/Max, Data hold and Auto power off
|
Click to zoom |
Small diameter elongated jaw fits into tight spaces Features: - 4000 count LCD display
- 1mA resolution
- Jaw opens to 0.5" (12.7mm)
- AC/DC Voltage, Resistance, Frequency, Capacitance, and Duty Cycle
- Diode Test/Continuity Beeper
- Data Hold and Max Hold
- Complete with test leads, 9V battery and
|
Click to zoom |
Discontinued Product - Replaced by 380976 Description: Measurements include Resistance, Capacitance, and Frequency Features: - Phase rotation function identifies phase sequence for 3 phase motor installations
- Wide Capacitance and Frequency ranges
- Large display with 40 segment bargraph
- Min/Max record/recall
|
Click to zoom |
Description: Functions include Power, Current, Insulation Resistance and Temperature (Type K) Features: - True Power, Aparent Power, Reactive Power, Horsepower, Power factor, Phase Angle with Lead/Lag indicator
- AC+DC µA Current with 10nA resolution for flame rod tests
- 9999 count LCD
- Type K Temperature measurement
- Min/Max, Data Hold, Auto power off
Applications: AC Power evaluation Motor/Generator installation and repair HVAC flame rod tests Capture max/min temperature or current values Category III rating for industrial measurements
|
Click to zoom |
Description: Measures Current, Insulation Resistance, Temperature (Type K) and Power Features: - 1.6" (40mm) clamp jaw opening and large dual LCD display (9999 count)
- Measures 1/3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR), Horsepower (HP), Power Factor, and Phase Angle with Lead/Lag indicator
- AC+DC µA current with 10nA resolution for flame rod tests
- Auto Detect AC/DC Voltage measurements with simultaneous frequency display
- Capacitance to 7000µF with 0.001µF resolution
- High Resistance tests to 100MOhm
- Type K, °C/°F switchable, temperature to 1000°F
- Diode and Continuity tests
- Complete with test lead kit, general purpose Type K thermocouple probe, carrying case, and 9V battery
|
Click to zoom |
Description: Datalogs up to 4000 readings Features: - 1000A Clamp measures 1f or 3f (phase) power to 600kW
- Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz
- Large 4-digit LCD with fast 40 seg. bargraph
- 25 point memory viewable on display
- Data Hold, Peak Hold, MIN/MAX and Auto Power Off
- Complete with meter, aligator clips, test leads, datalogger/RS-232 module and PC Software with cable
|
Click to zoom |
Description: Measures, computes, and displays 3-Phase Power on Balanced or Unbalanced Loads Features: - Display Lead/Lag Current/Voltage phase shift in degrees
- Store/recall last 5 readings
- DC Current Auto-Zero
- ual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz
- Advanced Relative and Min/Max functions
|
Click to zoom |
Description: Four clamps for power measurements on single phase, 3-phase/3-wire or 3-phase/4-wire systems Features: - Large backlighting LCD displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage an dcurrent of the three phases)
- Clamp-on True RMS power measurements with software for Harmonics analysis
- Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
- Current measurements to 1000A and Voltage measurements to 600V kWH,
- kVARh and kVAh energy measurements Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets
- Programmable Start/Stop datalogging times
- PC interface with Windows 95/98/NT/2000/ME/XP compatible software for single and three phase voltage/current Waveform display and Harmonic analysis
- Phase sequence measurements
- Complete with 4 current clamps, 4 voltage leads with alligator clips, 8 AA batteries, software, PC interface cable, and carrying case
|
Click to zoom |
Set of 3 Current Clamp Probes Features: - 1.2" (30mm) jaw size
- 100A Max Current
|
Click to zoom |
Set of 3 Flexible Current Probes Features: - 24" (610mm) long
- 3000A Max Current
|
Click to zoom |
Description: Flexible 24" (610mm) probe easily wraps around bus bars and cable bundles Features: - AC Voltage to 600V
- Fast Peak capture (30µs)
- Selectable frequency (50/60Hz)
- Max/Min feature
- Simultaneously displays Frequency with Current or Voltage
- Large 4000 count LCD dual display
- Auto power off with disable feature
- Complete with 24" (61cm) flexible current probe, carrying case, and 2 AA batteries
|
Click to zoom |
Description: Clamp meter includes AC/DC Voltage and Resistance measurements Features: - Peak Hold for in-rush Currents
- Data Hold
- Auto power off
|
Click to zoom |
Description: Autoranging with Capacitance and Temperature functions Features: - AC/DC Current readings with resolution of 0.1A
- Peak Hold Data hold,
- Auto power off
|
Click to zoom |
Discontinued Product - Replaced by MA640 Description: Compact size clamp with Frequency Features: - Also measures Voltage, Resistance, and Frequency Auto or manual ranging
- Relative function zeros
- Current measurements or creates a reference value
- Data Hold
|
Click to zoom |
Description: Analog AC Clamp Meter with Rotary Scale and Pointer LockFeatures: - Single function/range switch for easy one hand operation
- Jaw opens to 1.5" (38mm)
- AC/DC Voltage and Resistance measurement
- Pointer Lock function freezes the reading
- Zero adjust
- Complete with test leads, 1.5V battery, and carrying case
|
Click to zoom |
Description: Ideal for automotive, heavy equipment and marine DC current measurements Features: - High Accuracy and Resolution One touch "Auto Zero"
- Large 4000 count LCD display
- Easy to use, single function meter
- Auto power off saves battery life
- Overload protection Data hold freezes reading on display
- Large 1.2" (30mm) clamp jaw opening
- Includes protective rubber holster, wrist strap, belt holster, and 9V batter
|
Click to zoom |
Discontinued Product - Replaced by EX622 Description: AC Clamp-on meter with built-in dual Thermocouple inputs and Non-contact Voltage Detector Features: - True RMS measurements for accurate AC Voltage and Current measurements
- Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
- Built-in non-contact Voltage detector with LED alert
- DC µA multimeter function for HVAC flame rod Current measurements
- Data Hold plus fast Peak Hold of current surges during motor startup
- 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
- Measures motor capacitors to 40,000µF
- 1.25" (32mm) jaw opening for conductors up to 500MCM
- Rugged double molded housing
- Auto power off with audible alert and disable function
- Autoranging with manual override
- Complete with CAT III-600V, double molded test leads, 9V battery, two Type K bead wire probes (-22 to 572°F/-30 to 300°C), and case
|
Click to zoom |
Description: AC/DC Clamp-on meter with built-in dual Thermocouple inputs and Non-contact Voltage Detector Features: - True RMS measurements for accurate AC Voltage and Current measurements
- Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
- Built-in non-contact Voltage detector with LED alert
- DC µA multimeter function for HVAC flame rod Current measurements
- Data Hold plus fast Peak Hold of current surges during motor startup
- 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
- Measures motor capacitors to 40,000µF
- 1.25" (32mm) jaw opening for conductors up to 500MCM
- Rugged double molded housing
- Auto power off with audible alert and disable function
- Autoranging with manual override
- Complete with CAT III-600V, double molded test leads, 9V battery, two Type K bead wire probes (-22 to 572°F/-30 to 300°C), and case
|
Click to zoom |
Description: AC Clamp-on meter with built-in dual Thermocouple inputs, NCV Detector and InfraRed Thermometer Features: - True RMS measurements for accurate AC Voltage and Current measurements
- Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
- Built-in non-contact IR Thermometer with laser pointer for locating hot spots (up to 518°F/270°C)
- Built-in non-contact Voltage detector with LED alert
- DC µA multimeter function for HVAC flame rod Current measurements
- Data Hold plus fast Peak Hold of current surges during motor startup
- 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
- Measures motor capacitors to 40,000µF
- 1.25" (32mm) jaw opening for conductors up to 500MCM
- Rugged double molded housing
- Auto power off with audible alert and disable function
- Autoranging with manual override
- 8 to 1 distance to target ratio
- Complete with CAT III-600V, double molded test leads, 9V battery, two Type K bead wire probes (-22 to 572°F/-30 to 300°C), and case
|
Click to zoom |
Description: AC/DC Clamp-on meter with built-in dual Thermocouple inputs, NCV Detector and InfraRed ThermometerThis product is the winner of HKEIA 2008 Gold Award Features: - True RMS measurements for accurate AC Voltage and Current measurements
- Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
- Built-in non-contact IR Thermometer with laser pointer for locating hot spots (up to 518°F/270°C)
- Built-in non-contact Voltage detector with LED alert
- DC µA multimeter function for HVAC flame rod Current measurements
- Data Hold plus fast Peak Hold of current surges during motor startup
- 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
- Measures motor capacitors to 40,000µF
- 1.25" (32mm) jaw opening for conductors up to 500MCM
- Rugged double molded housing
- Auto power off with audible alert and disable function
- Autoranging with manual override
- 8 to 1 distance to target ratio
- Complete with CAT III-600V, double molded test leads, 9V battery, two Type K bead wire probes (-22 to 572°F/-30 to 300°C), and case
|
Click to zoom |
Description: AC Current Clamp Meter Features: - Peak function captures inrush currents and voltage transients
- Data Hold “freezes” data in display 1.2" (30mm) circular jaw opening forlarge cables (500MCM)
- Auto power off
- Complete with test leads, 9V battery, and carrying case
|
Click to zoom |
Description: AC Current, True RMS, and Temperature Features: - MultiMeter functions include AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Type K Temperature, Diode, and Continuity
- Peak function captures inrush currents and voltage transients
- True RMS Current and Voltage measurements
- 1.2" (30mm) circular jaw opening for large cables (500MCM)
- Features include Data Hold, F°/C° switchable, Auto power off
- Double molded housing and white LED display backlighting
- Complete with test leads, 9V battery, Type K bead wire probe and belt holster
|
Click to zoom |
Description: AC/DC Current, True RMS, Temperature and DC Zero Features: - MultiMeter functions include AC/DC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Type K Temperature, Diode, and Continuity
- Peak function captures inrush currents and voltage transients
- True RMS Current and Voltage measurements
- 1.2" (30mm) circular jaw opening for large cables (500MCM)
- Features include Data Hold, F°/C° switchable, DC Zero, Auto power off
- Double molded housing and white LED display backlighting
- Complete with test leads, 9V battery, Type K bead wire probe and belt holster
|
Click to zoom |
Description: AC Clamp-on multimeter with built-in non-contact InfraRed Thermometer Features: - Non-contact InfraRed Temperature measurements with laser pointer
- Peak hold captures inrush currents and Transients
- MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Autoranging with manual range button
- Features include Data Hold and Min/Max, Auto Power off
- Complete with test leads, 9V battery and case
|
Click to zoom |
Description: AC Clamp-on multimeter with built-in non-contact InfraRed Thermometer
Features:
- Non-contact InfraRed Temperature measurements with laser pointer
- True RMS Current and Voltage measurements
- Peak hold captures inrush currents and Transients
- MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, Continuity and Type K Thermometer
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Autoranging with manual range button
- Features include Data Hold and Min/Max, Auto Power off
- Complete with test leads, 9V battery, Type K probe and case
|
Click to zoom |
Description:AC/DC Clamp-on multimeter with built-in non-contact InfraRed Thermometer Features: - AC/DC Current
- True RMS
- Type K Thermometer
- DC Zero
- Non-contact InfraRed Temperature measurements with laser pointer
- Peak hold captures inrush currents and Transients
- MultiMeter functions include
- AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit dual display
- Features include Data Hold and Min/Max
- Autoranging with manual range button
- Auto Power off
- Complete with test leads, 9V battery, Type K probe (-4 to 482°F/-20 to 250°C), and belt holster
|
Click to zoom |
Description: AC/DC Clamp-On Meter/Digital MultiMeter with built-in Infrared Thermometer Features: - Non-contact IR Temperature measurements with laser pointer
- True RMS Current and Voltage measurements
- Peak hold captures inrush currents and Transients
- Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Data Hold and Min/Max, Auto Power off
- Complete with standard test leads, 9V battery, Type K probe (-22 to 572°F/-30 to 300°C), belt holster, and professional CAT III-1000V Test Leads
|
Click to zoom |
Description: Clamp meter with built-in AC Voltage detector and flashlight Features: - Measures 200A AC Current up to 100mA resolution
- 3% basic ACA accuracy
- 0.7" (18mm) jaw opening; 300MCM cable size
- 2000 count LCD display
- Non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip
- Built-in white LED flashlight
- Measures Frequency up to 1kHz with 0.01Hz resolution
- Autoranging with Auto Power Off and Data hold function
|
Click to zoom |
Description: Compact size AC Clamp meter with built-in AC Voltage detector and Flashlight Features: - 0.7" (18mm) jaw opening
- 2000 count backlit LCD display
- Non-contact AC Voltage detector (100 to 600VAC) via clamp tip
- Built-in white LED flashlight
- Continuity and Diode Test, Max Hold, Auto power off
|
Click to zoom |
Integrated Non-Contact Voltage Detector Features: - True RMS for accurate readings of non-sinusoidal waveforms
- Built-in non-contact Voltage detector with LED alert
- 2.0" (52mm) jaw size for conductors up to 500MCM
- Dual 40,000/4000 count, backlit LCD display
- Includes Multimeter and Type K Temperature functions
- Inrush function captures transients during motor startups
- Relative Mode for Capacitance Zero and Offset Adjustment
- Data Hold, Peak Hold, MIN/MAX, and Auto Power Off
- Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case
|
Click to zoom |
Description: AC Current model to meet your application needs Features: - 2000 count LCD display
- High accuracy for Current measurements
- 0.9" (23mm) jaw size accommodates conductors up to 300MCM
- Continuity beeper and Diode test
- Data Hold, Max Hold
- Overload protection for all ranges
- Overrange and low battery indicators
- Autoranging with Auto Power Off
- Complete with test leads, case and two AAA batteries
|
Click to zoom |
Description: High accuracy for current measurements Features: - Functions include AC/DC Voltage, AC/DC Current, Capacitance, Frequency, Temperature, and Duty Cycle
- High accuracy for Current measurements
- 4000 count LCD display
- Data Hold, Auto Zero
- Autoranging with Auto Power Off
- 0.9" (23mm) jaw size accommodates conductors up to 300MCM
- Compact size allows measurements in tight locations
- Complete with test leads, Type K bead wire probe (-22 to 572°F/-30 to 300°C), case, and two AAA batteries
|
Click to zoom |
Description: AC Clamp-on meter with Integrated Non-Contact Voltage Detector Features: - Built-in non-contact Voltage detector with LED alert to quickly check for the presence of live wires before testing
- 1.2" (30mm) jaw size for conductors up to 500MCM
- 4000 count, backlit LCD display
- Multimeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode, and Continuity
- Relative Mode for Capacitance Zero, and Offset Adjustment
- Data Hold and MIN/MAX, Auto Power Off
- Complete with test leads, temperature probe (-22 to 572°F/-30 to 300°C), two AAA batteries, and carrying case
|
Click to zoom |
Description: AC Current Clamp Meter with Built-In Non-Contact Voltage Detector Features: - AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
- Integrated Non-Contact Voltage Detector with LED alert
- Compact size allows measurments in tight locations
- 1.2" (30mm) jaw size for conductors up to 350MCM
- Relative Mode for Capacitance Zero, and Offset Adjustment
- Data Hold and MIN/MAX, Auto Power Off
- Complete with test leads, Type K temperature probe (-22 to 572°F/-30 to 300°C), two AAA batteries, and carrying case
|
Click to zoom |
Description: Measurements include µA Current and Temperature Features: - Display Current and multimeter measurements simultaneously
- Wide Capacitance, Temperature, and Frequency ranges
- Test lead µA range with high 0.1µA resolution for HVAC and Process control applications
- Data/MAX hold and Auto off
|
Click to zoom |
Description: True RMS AC Current Clamp Meter with Built-In Non-Contact Voltage Detector Features: - AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
- Integrated Non-Contact Voltage Detector with LED alert
- 1.5" (40mm) jaw size for conductors up to 500MCM
- 6000 count, backlit LCD display
- Relative Mode for Capacitance Zero and Offset Adjustment
- Data Hold and MIN/MAX, Auto Power Off
- Complete with test leads, Type K bead wire temperature probe (-22 to 572°F/-30 to 300°C), 9V battery and carrying case
|
Click to zoom |
Description: True RMS AC/DC Current Clamp Meter with Built-In Non-Contact Voltage Detector Features: - AC/DC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
- Integrated Non-Contact Voltage Detector with LED alert
- 1.5" (40mm) jaw size for conductors up to 500MCM
- 6000 count, backlit LCD display
- Relative Mode for Capacitance Zero and Offset Adjustment
- Data Hold and MIN/MAX, Auto Power Off
- Complete with test leads, Type K bead wire temperature probe (-22 to 572°F/-30 to 300°C), 9V battery and carrying case
|
|
|
|
|
