 |
Extech Multimeters |
 Click to zoom |
5 function analog multimeter with easy to read color-coded display Features: - 1.75" (45mm) analog display
- Three color coded scale for easy reading
- AC/DC Voltage, DC Current, Resistance, Decibel function
- Full size test leads for better grip and easy replacement
|
Click to zoom |
Easy to read analog display Measure AC/DC Voltage, DC Current, Resistance and Decibel 5% full scale accuracy Battery test on 9V and 1.5V batteries
|
Click to zoom |
Autoranging multimeter with 8 functions including Current and Logic Test Features: - Large 3200 count high contrast LCD display with bargraph
- Auto Power off to conserve battery life
- AC/DC Voltage & Current, Resistance, Diode/Continuity, Logic Test
- Autoranging with Data Hold and Range Hold functions
- Safety probe tip can be stored when not in use
- Overload and low battery indication
- Complete with extra fuses and test lead with alligator clip
|
Click to zoom |
Features: Autoranging multimeter with rotary dial - Large 2000 count high contrast LCD display
- Non-Contact Voltage detection with visible and audible alarm
- Auto Power off, Data Hold, and Range Hold
- Functions include AC/DC Voltage, Resistance, Continuity and Diode Test
- Complete with test lead with alligator clips, two 1.5V AAA batteries, and carrying case
|
Click to zoom |
AC Current measurements, no battery required Features: - 0.62" (16mm) clamp jaw
- 1mV AC output per Amp
- ±2% basic accuracy
- Complete with built-in 5.3ft (163cm) cable with banana plugs
|
Click to zoom |
Built-in non-contact voltage detector with LED alert Features: - AC/DC Current measurements to 400A
- Fits virtually any MultiMeter with standard shrouded banana plug sockets
- Built-in non-contact voltage detector with LED alert
- 1.2" (30mm) clamp jaw
- Measures AC/DC Current in two ranges: 0 to 40A and 0 to 400A
- ±2.5% basic accuracy
- DC zero adjust
- Complete with built-in 3.8ft (1.1m) cable with banana plugs and two AAA batteries
|
Click to zoom |
Datalogs up to 100,000 readings. Programmable sample rate from 1sec to 24hrs Features: - Measure True RMS AC Voltage (600V) or Current (200A)
- Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
- High/Low user-settable alarms
- LCD indicates time/date, current readings, Min/Max, and whether alarm settings have been exceeded
- Normal, Peak and Capture (user-specified trigger level) recording modes
- Auto Power off and battery check
- Complete with current clamp, test leads, USB cable, Windows® compatible software, universal AC Adaptor, and 3.6V Lithium battery
|
Click to zoom |
Autoranging with 10 functions pocket-size multimeter with intergrated test leads Features: - Autoranging with 10 functions including Frequency, Capacitance, and Duty cycle
- Large high contrast 4000 count LCD display
- Auto Power off to conserve battery life
- Autoranging with Relative and Data Hold
- Diode Test and Continuity Beeper
- Built-in storage compartment for integrated test leads
- Protective rubber holster provides extra protection on the meter
- Over-range and low battery indication
|
Click to zoom |
Autoranging DMM with NCV Detector and built-in Flashlight Features: - Large high contrast 4000 count LCD display
- Non-Contact Voltage detection identifies live circuits
- Built-in Flashlight
- Measures AC/DC Voltage, AC/DC Current and Resistance
- Frequency and Duty Cycle
- Diode Test and Continuity Beeper
- Built-in storage clips for integrated test leads
- Double molded housing provides extra protection
- Over-range and low battery indication
- Complete with test leads and two AAA batteries
|
Click to zoom |
Features: 0.5% basic accuracy 100 - 600VAC Non-contact voltage measurement Auto Power Off conserves battery life Low battery indicator Manual Ranging
|
Click to zoom |
Features: 0.5% basic accuracy 100 - 600VAC Non-contact voltage measurement Auto Power Off conserves battery life Low battery indicator Autoranging 2000 count
|
Click to zoom |
Features: 0.5% basic accuracy 100 - 600VAC Non-contact voltage measurement Auto Power Off conserves battery life Low battery indicator Autoranging 4000 count Data Hold Type K Temperature °F/ °C switchable Capacitance Frequency Duty Cycle Relative function
|
Click to zoom |
Features: Easy to read large backlit display Type K thermometer built-in for surface or air temperature measurements Input fuse protection and mis-connection warnings with audible and visible signals Data hold freezes display reading Ergonomically designed to fit comfortably in your hand
|
Click to zoom |
Features: Easy to read large backlit display True RMS AC measurements Type K thermometer built-in for surface or air temperature measurements Input fuse protection and mis-connection warnings with audible and visible signals Data hold freezes display reading Ergonomically designed to fit comfortably in your hand
|
Click to zoom |
Features: Advanced measurements include Capacitance, Frequency, and Duty Cycle Relative function for establishing a base line references Type K thermometer built-in for surface or air temperature measurements Input fuse protection and mis-connection warnings Large 4000 count backlit LCD display with easy to read 1 inch digits Data Hold and Power Off Complete with CAT III test leads, multi-position tilt stand, hanging strap, holster with built-in test lead storage, bead wire temperature probe (-4 to 482°F/-20 to 250°C), and 9V battery
|
Click to zoom |
Features: Advanced measurements include Capacitance, Frequency, and Duty Cycle Relative function for establishing a base line reference True RMS AC measurements Type K thermometer built-in for surface or air temperature measurements Input fuse protection and mis-connection warnings with audible and visible signals Specifications: | Input Protection Limits | | V | DC or V AC 600V DC/AC, 200Vrms on 400mV range | | mA | AC/DC 500mA 250V fast acting fuse | | A | AC/DC 20A 250V fast acting fuse(30 seconds max every 15 minutes) | | Temperature | 60V DC/24V AC | | General | | Diode Test | Test current of 0.3mA maximum, open circuit voltage 1.5V DC typical | | Continuity Check | Audible signal will sound if the resistance is less than 150Ω (approx.), test current <0.7mA | | Temperature Sensor | Requires type K thermocouple | | Input Impedance | >7.5M Ω (VDC & VAC) | | AC Response | True rms | | ACV Bandwidth | 50Hz to 1kHz | | Display | 4000 count backlit liquid crystal | | Overrange indication | "OL" is displayed | | Auto Power Off | 15 minutes (approximately) | | Polarity | Automatic (no indication for positive); Minus (-) sign for negative | | Measurement Rate | 2 times per second, nominal | | Low Battery Indication | " " is displayed if battery voltage drops below operating voltage | | Battery | One 9 volt (NEDA 1604) battery | | Fuses | mA, μA ranges; 0.5A/250V fast blow A range; 20A/250V ceramic fast blow | | Operating Temperature | 41°F to 104°F (5°C to 40°C) | | Storage Temperature | -4°F to 140°F (-20°C to 60°C) | | Operating Humidity | Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F(40°C) | | Storage Humidity | <80% | | Operating Altitude | 7000ft. (2000meters) maximum. | | Weight | 0.753lb (342g) (includes holster). | | Size | 7.36" x 3.2" x 2.0" (187 x 81 x 50mm) (includes holster) | | Safety | For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (1995), EN61010-1 (1995) Overvoltage Category III, Pollution Degree 2. |
|
Click to zoom |
Features: Non-contact InfraRed thermometer measures surface temperature of objects unsafe to contact or difficult to reach InfraRed features 8:1 distance to target ratio with 0.95 fixed emissivity Input fuse protection and mis-connection warnings with audible and visible signals Auto power off, Data Hold Specifications: | Input Protection Limits | | V | DC or V AC 600V DC/AC, 200Vrms on 200mV range | | mA | AC/DC 200mA 250V fast acting fuse | | A | AC/DC 20A 250V fast acting fuse(30 seconds max every 15 minutes) | | Resistance, Diode Test, Continuity | 250Vrms for 15sec max | | General | | Diode Test | Test current of 0.3mA maximum, open circuit voltage 1.5V DC typical | | Continuity Check | Audible signal will sound if the resistance is less than 150Ω (approx.), test current <0.7mA | | IR Spectral response | 6 to 16μm | | IR Emissivity | 0.95 fixed | | IR distance | ratio 8:1 | | Input Impedance | >7.5M Ω (VDC & VAC) | | AC Response | Average responding | | ACV Bandwidth | 50Hz to 1kHz | | Display | 2000 count backlit liquid crystal | | Overrange indication | "OL" is displayed | | Auto Power Off | 15 minutes (approximately) | | Polarity | Automatic (no indication for positive); Minus (-) sign for negative | | Measurement Rate | 2 times per second, nominal | | Low Battery Indication | " " is displayed if battery voltage drops below operating voltage | | Battery | One 9 volt (NEDA 1604) battery | | Fuses | mA, μA ranges; 0.2A/250V fast blow A range; 20A/250V ceramic fast blow | | Operating Temperature | 41°F to 104°F (5°C to 40°C) | | Storage Temperature | -4°F to 140°F (-20°C to 60°C) | | Operating Humidity | Max 80% up to 87°F (31º°C) decreasing linearly to 50% at 104°F(40°C) | | Storage Humidity | <80% | | Operating Altitude | 7000ft. (2000meters) maximum. | | Weight | 0.753lb (342g) (includes holster). | | Size | 7.36" x 3.2" x 2.0" (187 x 81 x 50mm) (includes holster) | | Safety | For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (1995), EN61010-1 (1995) Overvoltage Category III, Pollution Degree 2. |
|
Click to zoom |
Features: Non-contact InfraRed thermometer measures surface temperature of objects unsafe to contact or difficult to reach InfraRed features 8:1 distance to target ratio with 0.95 fixed emissivity Input fuse protection and mis-connection warnings with audible and visible signals Auto power off, Data Hold True RMS AC measurements Relative function Type K thermometer, Capacitance, Frequency, and Duty Cycle Complete with CAT III test leads, multi-position tilt stand, hanging strap, holster with test lead storage, bead wire temp probe, and 9V battery Specifications: | Input Protection Limits | | V DC or V AC | 600V DC/AC, 200Vrms on 400mV range | | mA AC/DC | 500mA 250V fast acting fuse | | A AC/DC | 20A 250V fast acting fuse(30 seconds max every 15 minutes) | | Frequency, Resistance, Capacitance, Duty Cycle, Diode Test, Continuity | 250Vrms for 15sec max | | Temperature | 60V DC/24V AC | | General | | Diode Test | Test current of 0.3mA maximum, open circuit voltage 1.5V DC typical | | Continuity Check | Audible signal will sound if the resistance is less than 150Ω (approx.), test current <0.7mA | | Temperature Sensor | Requires type K thermocouple | | IR Spectral response | 6 to 16μm | | IR Emissivity | 0.95 fixed | | IR distance ratio | 8:1 | | Input Impedance | >7.5M Ω (VDC & VAC) | | AC Response | True rms | | ACV Bandwidth | 50Hz to 1kHz | | Crest Factor | <3:1 at full scale & <6:1 at half scale | | Display | 4000 count backlit liquid crystal | | Overrange indication | "OL" is displayed | | Auto Power Off | 15 minutes (approximately) | | Polarity | Automatic (no indication for positive); Minus (-) sign for negative | | Measurement Rate | 2 times per second, nominal | | Low Battery Indication | " " is displayed if battery voltage drops below operating voltage | | Battery | One 9 volt (NEDA 1604) battery | | Fuses | mA, μA ranges; 0.5A/250V fast blow A range; 20A/250V ceramic fast blow | | Operating Temperature | 41°F to 104vF (5°C to 40°C) | | Storage Temperature | -4°F to 140°F (-20°C to 60°C) | | Operating Humidity | Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F(40°C) | | Storage Humidity | <80% | | Operating Altitude | 7000ft. (2000meters) maximum. | | Weight | 0.753lb (342g) (includes holster). | | Size | 7.36" x 3.2" x 2.0" (187 x 81 x 50mm) (includes holster) | | Safety | For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (1995), EN61010-1 (1995) Overvoltage CategoryIII, Pollution Degree 2. |
|
Click to zoom |
Averaging DMM with 4,000 count large LCD display and waterproof housing Features: - Averaging DMM with 10 functions and 0.5% basic accuracy
- AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
- Dual sensitivity frequency functions (electrical/electronic)
- 1000V input protection on all functions
- 10A max Current
- Data hold, Relative, Auto power off
- 4,000 count large backlit LCD
- Double molded housing for waterproof protection
- Complete with double molded test leads, magnetic hanging strap, carrying case and 9V battery
|
Click to zoom |
CAT IV MultiMeter and AC Voltage Detector with 8-piece Test Lead kit Features: - Kit Includes:
- EX505 - Industrial grade, CAT IV-600V, 4000 count display, waterproof, drop-proof, rugged multimeter with True RMS functions
- DV25 - Dual Range AC Voltage Detector (24 to 1000VAC/100 to 1000VAC) + Flashlight with Audible/ Visual indication, double-molded housing, and CAT IV-1000V safety rating
- TL808 - 8-Piece Professional Test Lead Kit with CAT III-1000V safety rating
- Set of double molded professional test leads
- Type K thermocouple bead probe and Type K to Banana Input Adaptor
- Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed
|
Click to zoom |
CAT IV MultiMeter and AC Voltage Detector with 8-piece Test Lead kit Features: - Kit Includes:
- EX505 - Industrial grade, CAT IV-600V, 4000 count display, waterproof, drop-proof, rugged multimeter with True RMS functions
- DV25 - Dual Range AC Voltage Detector (24 to 1000VAC/100 to 1000VAC) + Flashlight with Audible/ Visual indication, double-molded housing, and CAT IV-1000V safety rating
- TL808 - 8-Piece Professional Test Lead Kit with CAT III-1000V safety rating
- Set of double molded professional test leads
- Type K thermocouple bead probe and Type K to Banana Input Adaptor
- Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed
|
Click to zoom |
Features: Double molded for waterproof (IP67) protection Rugged design — drop proof to 6 feet 6000 count 1000V input protection on all functions Dual sensitivity frequency functions Large backlit LCD with bargraph Duty Cycle function Diode open circuit voltage of 2.8V DC Auto power off with disable feature Min/Max/Relative/Data Hold CE and EN61010 CAT IV-600V, CAT III-1000V Complete with double molded test leads, magnetic hanging strap, carrying case, and one 9V battery Three year warranty Specifications: | EX510 | | Display counts | 6000 | | Basic Accuracy | 0.09% | | DC Voltage | 0.1mV to 1000V | | AC Voltage | 1mV to 1000V | | DC/AC Current | 0.1?A to 20A | | Resistance | 0.1? to 60M? | | Frequency (electrical) | 0.01 to 400Hz | | Frequency (electronic) | 0.001Hz to 40MHz | | Duty Cycle | 0.1 to 99.9% | | Diode | Yes | | Continuity | Yes | | Dimensions | 7.25x3.25x2.25" | | Weight | 12.3oz |
|
Click to zoom |
Features: Double molded for waterproof (IP67) protection Rugged design — drop proof to 6 feet True RMS 6000 count Type K Temperature Capacitance 1000V input protection on all functions Dual sensitivity frequency functions Large backlit LCD with bargraph Duty Cycle function Diode open circuit voltage of 2.8V DC Auto power off with disable feature Min/Max/Relative/Data Hold CE and EN61010 CAT IV-600V, CAT III-1000V Complete with double molded test leads, magnetic hanging strap, Type K bead wire temperature probe, carrying case, and one 9V battery Three year warranty Specifications: | Display counts | 6000 | | Basic Accuracy | 0.09% | | DC Voltage | 0.1mV to 1000V | | AC Voltage | 1mV to 1000V | | DC/AC Current | 0.1?A to 20A | | Resistance | 0.1? to 60M? | | Capacitance | 0.01nF to 1000?F | | Frequency (electrical) | 0.01 to 400Hz | | Frequency (electronic) | 0.001Hz to 40MHz | | Temperature (Type K) | -50 to 1382°F | | | (-45 to 750°C) | | Duty Cycle | 0.1 to 99.9% | | Diode | Yes | | Continuity | Yes | | Dimensions | 7.25x3.25x2.25" | | Weight | 12.3oz |
|
Click to zoom |
True RMS CAT IV Digital MultiMeter with Type K probe and Test Leads Features: - Kit includes:
- EX520 CAT IV True RMS Industrial Autoranging Digital MultiMeter (6,000 count)
- TL810 Electrical Test Lead Kit (8 pcs)
- TL873 Type K Thermocouple bead probe (-22 to 572°F (-30 to 300°C))
- Hanging strap with magnet
- Kit comes in convenient carrying case for protection and organization of your instruments
|
Click to zoom |
Features:
Double molded for waterproof (IP67) protection
Rugged design - drop proof to 6 feet
True RMS 40,000 count
Type K Temperature
Capacitance
Peak Hold
4 to 20mA
1000V input protection on all functions
Dual sensitivity frequency functions
Large backlit LCD with bargraph
Duty Cycle function
Diode open circuit voltage of 2.8V DC
Auto power off with disable feature
Min/Max/Relative/Data Hold
CE and EN61010 CAT IV-600V, CAT III-1000V
Complete with double molded test leads, magnetic hanging strap, Type K bead wire temperature probe, carrying case, and one 9V battery
Three year warranty
|
Click to zoom |
True RMS CAT IV Digital MultiMeter with Type K probe, Test Leads and NCV Detector Features: - Kit includes:
- EX530 CAT IV True RMS Industrial Autoranging Digital MultiMeter (40,000 count)
- DV20 Non-Contact AC Voltage Detector (100V to 600V) with built-in Flashlight
- TL810 Electrical Test Lead Kit (8 pcs)
- TL873 Type K Thermocouple bead probe (-22 to 572°F (-30 to 300°C))
- Hanging strap with magnet
- Kit comes in convenient carrying case for protection and organization of your instruments
|
Click to zoom |
12 Function Wireless True RMS Industrial MultiMeter/Datalogger MultiMeter/Datalogger (up to 9,999 readings) with Wireless PC interface (915MHz) Features: - True RMS measurements for accurate AC Voltage and Current measurements
- AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
- Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
- Data Acquisition Mode for real time data transmission directly to your PC
- 1000V input protection on all functions
- Dual sensitivity frequency functions
- Large triple LCD display
- Complete with double molded test leads, magnetic hanging strap, Type K probe, remote receiver with USB cable, PC software, carrying case, and 9V battery
|
Click to zoom |
MultiMeter/Datalogger (up to 9,999 readings) with Wireless PC interface (433MHz) Features: - True RMS measurements for accurate AC Voltage and Current measurements
- AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
- Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
- Data Acquisition Mode for real time data transmission directly to your PC
- 1000V input protection on all functions
- Dual sensitivity frequency functions
- Large triple LCD display
- Complete with double molded test leads, magnetic hanging strap, Type K probe, remote receiver with USB cable, PC software, carrying case, and 9V battery
|
Click to zoom |
12 Function True RMS Industrial MultiMeter with IR Thermometer True RMS, autoranging DMM with large digit LCD display and Type-K/IR temperature function Features: - Built-in Non-contact InfraRed Thermometer with laser pointer
- True RMS CAT III-1000V, CAT IV-600V rated with 0.06% basic DCV accuracy
- Heavy duty Double molded, water resistant package
- Large backlit 40,000 count LCD with 40-segment bargraph
- Memory for storage and recall of three measurements
- Type K thermocouple contact temperature measurements
- Features include HOLD, RELATIVE and PEAK HOLD
- 1000V input protection on all functions
- Min, Max and Average recording, Auto power off with disable feature
- Capacitance, Frequency, Diode and Continuity functions
- Complete with double molded test leads, magnetic hanging strap, Type K bead wire temperature probe, case, and 9V battery
|
Click to zoom |
CAT IV MultiMeter, True RMS Clamp Meter with integrated AC Voltage Detector Features: - Kit includes:
- EX505 - Industrial grade, CAT IV-600V, 4000 count display, waterproof, drop-proof, rugged multimeter with True RMS functions
- MA620 - 600A True RMS 6000 count AC Clamp-on MultiMeter with built-in non-contact AC Voltage Detector, test leads and temperature probe
- Set of double molded professional test leads and magnetic hanging strap for the multimeter
- Type K thermocouple bead probe and Type K to Banana Input Adaptor
- Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed
|
Click to zoom |
True RMS Clamp Meter, 3-phase rotation tester, and CAT IV AC Voltage Detector Features: - Kit includes:
- MA640 - 600A True RMS 6000 count AC/DC Clamp-on MultiMeter with built-in non-contact AC Voltage Detector, test leads and temperature probe
- 480400 - 3-Phase Rotation Tester with multiline LCD display, durable double-molded housing, and easy-to-open wide-jaw alligator clips
- DV25 - Dual Range AC Voltage Detector (24 to 1000VAC/100 to 1000VAC) + Flashlight with Audible/Visual indication, double-molded housing, and CAT IV-1000V safety rating
- Set of double molded professional test leads
- Type K thermocouple bead probe and Type K to Banana Input Adaptor
- Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed
|
Click to zoom |
Features: 0.08% basic DCV accuracy ML720 — Store and View up to 43,000 data points 10 selectable datalogging sample rates from 0.05sec to 480 seconds True RMS Voltage and Current measurements Smart auto power off Hold and low resistance auto lead zero
|
Click to zoom |
Features: - 0.03% basic DCV accuracy
- 50,000 count display with 500,000 counts for DCV and Hz
- True RMS combination AC+DC function
- Highest resolution to 1μV, 0.01μA, 0.0001Hz, 0.01Ω
- 4 to 20mA, displayed as 0-100% for process current measurements
|
Click to zoom |
Features: - 0.02% basic DCV accuracy
- dual input Type K Thermometer, higher True RMS ACV bandwidth (up to 100kHz) and 1000V input protection on all functions
- 50,000 count display with 500,000 counts for DCV and Hz
- True RMS combination AC+DC function
- Highest resolution to 1μV, 0.01μA, 0.0001Hz, 0.01Ω
- 4 to 20mA, displayed as 0-100% for process current measurements
|
Click to zoom |
Compact Manual ranging multimeter with 6 functions including Temperature Features: - Large easy to read digital display
- AC/DC Voltage, DC Current, Resistance, Type K Temperature
- 1.5V and 9V Battery test function
- Complete with rubber holster, 9V battery, Type K bead wire probe (-22 to 572°F/-30 to 300°C) and test leads
|
Click to zoom |
Compact Autoranging multimeter with 8 functions including Temperature Features: - Large easy to read digital display
- AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Type K Temperature
- Auto power off with disable feature
- Complete with rubber holster, 9V battery, Type K bead wite probe (-22 to 572°F/-30 to 300°C) and test leads
|
Click to zoom |
Features: - 4000 counts on large LCD with full function indication
- Measures AC/DC Voltage and Current,
- Resistance, Capacitance, Frequency and Temperature
- Temperature measurements to 1400°F (760°C)
- Duty Cycle, Continuity and Diode test
- Autoranging with manual range override
- Relative zero, Data Hold and Range Hold
- 10A fuse protection
- Overload protection and indication
- Auto power off saves battery life
- Includes protective rubber holster with stand, two 1.5V AAA batteries, and test leads
- CAT II-600V, CE & UL Listed
|
Click to zoom |
Compact Manual ranging multimeters with 8 functions including Temperature Features: - Large easy to read digital display
- AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
- 1.5V and 9V Battery test function
- Convenient mini size with protective rubber holster and tilt stand
- Data Hold locks reading in the display
- Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads
|
Click to zoom |
Compact Autoranging multimeters with 10 functions including Temperature Features: - Large easy to read digital display
- AC/DC Voltage, DC Current, Resistance, Capacitance, Frequency, Type K Temperature, Continuity/Diode
- Convenient mini size with protective rubber holster and tilt stand
- Data Hold locks reading in the display
- Includes protective rubber holster, 2xAAA batteries, bead wire Type K temp. probe and test leads
|
Click to zoom |
Features: - 0.08% basic DCV accuracy
- Smart auto power off
- Hold and low resistance auto lead zero
- Optional SW800 PC software and cable sold separately
|
Click to zoom |
Features: - 0.08% basic DCV accuracy
- True RMS
- Smart auto power off
- Hold and low resistance auto lead zero
- True RMS AC Voltage & Current, and Temperature functions plus Relative, Min, Max, Max-Min, Peak Hold and Zoom
- Optional SW800 PC software and cable sold separately
| |
|
Discontinued Product - No Replacement Features: - Oversized high contrast 4000 count display
- Measures temperature
- True RMS responding
- Data Hold, Relative, and Auto Power off
- CAT II-1000V, CE & UL Listed
| |
|
True RMS Professional Electrical/HVAC Clamp-on Kit TK32 Kit is contains the necessary test tools for reparing, installing and troubleshooting electrical and HVAC equipment. All the equipment comes packaged in a lightweight case that's handy and easily portable out in the field. True RMS Professional Current Clamp Meter Kit TK32 Kit is contains the necessary test tools for reparing, installing and troubleshooting electrical and HVAC equipment. All the equipment comes packaged in a lightweight case that's handy and easily portable out in the field.
|
Click to zoom |
Description: Assembled to accomodate all the electrical testing needs for installation and repair of electrical systems, HVAC equipment and large appliances. Includes: EX430 True RMS Autoranging Digital Multimeter, MA200 400A Clamp Meter, 40130 Non-Contact Voltage Detector, set of CAT III-1000V test leads, Type K thermocouple bead probe, and Type K to Banana Input Adaptor.
|
Click to zoom |
Description: Provide all the electrical testing needs for installation and repair of electrical systems, HVAC equipment and large appliances. Includes: EX430 True RMS multimeter includes 11 functions (AC/DC Voltage and Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode, and Continuity 42510 Mini IR Thermometer offers non-contact temperature measruements on surfaces difficult or unsafe to reach (-58 to 1000°F/-50 to 538°C) MA200 400A AC Clamp Meter includes 6 functions (AC Current, AC/DC Voltage, Resistance, Diode, and Continuity) 40130 Non-contact AC Voltage Detector measuresvoltages from 100V to 600V Supplied in an attractive storage case that provides protection and organization for the meters whenever they are needed Dimensions: 9.5x6.8x2.8” (241x173x71mm) 1 Year Warranty
|
Click to zoom |
Discontinued Product - Replaced by EX505-K Professional MultiMeter Kit Advanced kit contains the most commonly used testing tools for Electrical/HVAC and plant maintenance Kit contains an EX505 True RMS Autoranging MultiMeter, EX730 800A True RMS AC/DC Clamp Meter, DV20 Non-Contact AC Voltage Detector, and a 480172 AC Line Splitter Supplied in an attractive storage case that provides protection and organization for the meters and accessories whenever they are needed
|
Click to zoom |
Professional Clamp Meter Test Kit True RMS Professional Clamp with InfraRed Thermometer for non-contact Temperature measurements Includes: EX730: 800A True RMS AC/DC Clamp Meter (0.1A Resolution, ±3% AC accuracy) 480172: AC line splitter enables use of a clamp meter to measure AC Current on a 2-wire or 3-wire power cord to 15A DV20: Non-contact AC Voltage Detector (detects Voltage from 100 to 600V) 42510: Mini InfraRed Thermometer (-58 to 1000°F/-50 to 538°C) Set of test leads and Type K Thermocouple UL approved on EX730, DV20, and 480172 Dimensions: 9.5x6.8x2.8 (241x173x71mm
|
|
|
|
|
