 |
Extech Clamp Meters
|
 Click to zoom |
Description: AC/DC Current measurements Features: - 3.3" (83mm) clamp jaw
- Two ranges: 0 to 200A & 0 to 2000A
- DC zero adjust; Outputs 1mV/A
- 2% basic accuracy
|
Click to zoom |
Full range MultiMeter functions with high resolution to 0.1µA/0.1mV Features: - AC/DC Current via clamp with 0.1A resolution
- Large jaw size for high Current measurements
- Duty Cycle function
- Large Backlit display
- Push button Zero adjust improves DC accuracy
|
Click to zoom |
Measures Watts, Current, and Voltage Features: - Large LCD with 40 segment analog bargraph
- Data Hold, Max/Min recall, Auto Zero (DC current), plus low battery indication
- Auto power off
|
Click to zoom |
Description: High resolution mini clamp with Voltage, Frequency, and Resistance Features: - 0.9" (23mm) jaw opening
- High resolution to 10mA AC/DC
- Voltage, Resistance, and Frequency
- Fast 40 segment bargraph
- One touch Auto Zero for DC Current measurements
- Min/Max, Data hold and Auto power off
|
Click to zoom |
Highest resolution (0.1mA) and accuracy at low currents Features: - Low AC/DC Current measurements with high resolution to 0.1mA AC and 1mA DC
- Voltage measurements using test leads
- Fast 40 segment bargraph
- One touch Auto Zero for DC Current measurements
- Min/Max, Data hold and Auto power off
|
Click to zoom |
Description: True RMS mini-clamp with high current resolution Features: - 0.9" (23mm) jaw opening
- True RMS measurements with 1mA AC resolution
- Non-contact Frequency measurements to 10kHz through the clamp jaws
- Fast 40 segment bargraph
- One touch Auto Zero
- Min/Max, Data hold and Auto power off
|
Click to zoom |
Small diameter elongated jaw fits into tight spaces Features: - 4000 count LCD display
- 1mA resolution
- Jaw opens to 0.5" (12.7mm)
- AC/DC Voltage, Resistance, Frequency, Capacitance, and Duty Cycle
- Diode Test/Continuity Beeper
- Data Hold and Max Hold
- Complete with test leads, 9V battery and
|
Click to zoom |
Discontinued Product - Replaced by 380976 Description: Measurements include Resistance, Capacitance, and Frequency Features: - Phase rotation function identifies phase sequence for 3 phase motor installations
- Wide Capacitance and Frequency ranges
- Large display with 40 segment bargraph
- Min/Max record/recall
|
Click to zoom |
Description: Functions include Power, Current, Insulation Resistance and Temperature (Type K) Features: - True Power, Aparent Power, Reactive Power, Horsepower, Power factor, Phase Angle with Lead/Lag indicator
- AC+DC µA Current with 10nA resolution for flame rod tests
- 9999 count LCD
- Type K Temperature measurement
- Min/Max, Data Hold, Auto power off
Applications: AC Power evaluation Motor/Generator installation and repair HVAC flame rod tests Capture max/min temperature or current values Category III rating for industrial measurements
|
Click to zoom |
Description: Datalogs up to 4000 readings Features: - 1000A Clamp measures 1f or 3f (phase) power to 600kW
- Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz
- Large 4-digit LCD with fast 40 seg. bargraph
- 25 point memory viewable on display
- Data Hold, Peak Hold, MIN/MAX and Auto Power Off
- Complete with meter, aligator clips, test leads, datalogger/RS-232 module and PC Software with cable
|
Click to zoom |
Description: Measures, computes, and displays 3-Phase Power on Balanced or Unbalanced Loads Features: - Display Lead/Lag Current/Voltage phase shift in degrees
- Store/recall last 5 readings
- DC Current Auto-Zero
- ual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz
- Advanced Relative and Min/Max functions
|
Click to zoom |
Description: Four clamps for power measurements on single phase, 3-phase/3-wire or 3-phase/4-wire systems Features: - Large backlighting LCD displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage an dcurrent of the three phases)
- Clamp-on True RMS power measurements with software for Harmonics analysis
- Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
- Current measurements to 1000A and Voltage measurements to 600V kWH,
- kVARh and kVAh energy measurements Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets
- Programmable Start/Stop datalogging times
- PC interface with Windows 95/98/NT/2000/ME/XP compatible software for single and three phase voltage/current Waveform display and Harmonic analysis
- Phase sequence measurements
- Complete with 4 current clamps, 4 voltage leads with alligator clips, 8 AA batteries, software, PC interface cable, and carrying case
|
Click to zoom |
Description: Power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems Features: - Large backlit LCD displays up to 35 parameters in one screen
- True RMS power measurements with Harmonics display (1-99th order)
- Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold
- Simultaneous Harmonics and Waveform display
- Measures Current and Voltage
- Datalogger records up to 52,428 records in single phase, 2 wire applications (17,476 in 3-phase 4-wire applications)
|
Click to zoom |
Set of 3 Current Clamp Probes Features: - 1.2" (30mm) jaw size
- 100A Max Current
|
Click to zoom |
Set of 3 Flexible Current Probes Features: - 24" (610mm) long
- 3000A Max Current
|
1 2 3
|
|
|
|
