 |
PROTEK Component Testers
|
 Click to zoom |
| • | Six capacitance ranges and four inductance ranges | | • | High accuracy measurement | | • | Automatic zeroing | | • | Low battery indicator | | • | Fuse protected input | | • | Includes holster |
|
Click to zoom |
| | | • | Zero adjust for compensating stray capacitance | | • | Large easy to read 3-1/2 digits, 2000 count LCD | | • | 0.5% measurement accuracy | | • | Fused input | | • | 9 measurement ranges | | • | Three measurement frequencies | | • | Includes holster |
|
|
Click to zoom |
| | | • | 3 5/6 digits, 6,000 count LCD display | | • | Optically isolated RS232 interface with software | | • | Auto and manual ranging | | • | Wide measurement ranges | | • | Min/Max measurements and Auto power off | | • | Rubber over molded case for rugged environments |
|
|
Click to zoom |
| • | Handheld and Battery operated | | • | Can be used for "ESR" measurements | | • | 5 digit dual display LCD | | • | Measures L, C, R, |Z|, Q /D | | • | Displays Component value, Q or D, Δ, or Δ% | | • | Auto ranging and Range hold | | • | Built-in comparator with 4 Bin-sorting functions | | • | Open and short circuit calibration for accurate zeroing | | • | Series and Parallel equivalent circuit modes | | • | 100Hz, 120Hz, 1KHz and 10KHz test frequencies | | • | Warning alarm for Pass or Fail binning | | • | Auto Power Off | | • | Easy to use |
|
Click to zoom |
| • | Measures L, C, R, |Z|, Q and D | | • | Displays component value, Q or D, Delta, or Delta% | | • | 5 digit display for component value and Q/D | | • | Auto ranging or Range hold | | • | Built-in comparator with 4 bin-sorting function | | • | Open and short circuit calibration for accurate zeroing | | • | Series and Parallel equivalent circuit modes | | • | Three test frequencies | | • | Warning alarm for pass or fail binning | | • | Easy to use |
|
Click to zoom |
| • | 100Hz, 120Hz, 1KHz and 10KHz test frequencies | | • | 0.1% basic accuracy | | • | 5 digit Back Lit LCD display | | • | C+R, C+D, L+R, L+Q, R+Q or Z+Θ measurements | | • | Built in comparator for sorting components | | • | Up to 12 measurements per second | | • | RS232 and Handler interfaces | | • | Easy to use front panel | | • | Short and Open circuit input calibration | | • | LCD displays parameter values in Absolute, ∆ or ∆%; |
|
Click to zoom |
| • | 0.02% Basic accuracy | | • | Wide measurement Ranges for Capacitors, Resistors and Inductors | | • | Menus and parameters are displayed on an easy to read 320x 240 Graphics LCD with backlight | | • | Measurement Rates to 12 times per second | | • | 500 Test Frequencies from 12Hz to 100KHz | | • | Open and short-circuit compensation for accurate zeroing | | • | Binning and Pass/Fail operation | | • | Measurement averaging from 1 to 255 | | • | Optional GPIB and handler interface | | • | LCD displays measured values, Q/D, Absolute D and %D |
|
|
|
|
|
