 Click to zoom |
Unique 100x oscilloscope probe with bandwidth capability up to 150MHz and voltage to 2,000V (derated w/increasing frequency) for scopes up to 90MHz.
|
Click to zoom |
Oscilloscope probe x1/x10/R, 100MHz - HiPro, 1.2m. Cal Tests most popular replacement probe. Its 100MHz bandwidth (10x position) allows it to work with all types of general purpose oscilloscopes. The REF position on the thumb switch quickly provides ground point referencing.
|
Click to zoom |
Oscilloscope probe x1/x10/R, 200MHz - HiPro, 1.2m. With its higher 200MHz bandwidth (10x position), Model CT2675A works with oscilloscopes up to150MHz.
|
Click to zoom |
Oscilloscope probe Switchable 2-Position x1/x10, 60MHz - HiPro, 1.2m. Great for training with lower performance education oscilloscopes.
|
Click to zoom |
Oscilloscope probe x1/x10, 100MHz - HiPro, 1.2m
|
Click to zoom |
Oscilloscope probe x1/x100, 100MHz In - HiPro, 1.2m, Ins. BNC. Great general purpose probe for oscilloscopes with bandwidths up to 60MHz. Up to 15MHz bandwidth in the 1x position to 100MHz in the 10x.
|
Click to zoom |
Oscilloscope probe x100, 250MHz - HiPro, 1.2m, 1.2kV. Highest frequency fixed 100x probe. Where you need to measure signals with a higher voltage, up to 1,200V.
|
Click to zoom |
Model CT2982 High Voltage Probe allows a standard oscilloscope to measure voltages up to 15kV (DC + AC max) and frequencies up to 50MHz. Accuracy at 1kHz is <1%. With a divider ration of 1000 to 1, a voltage of 1,000V will read as 1V on your oscilloscope. Output is through a standard BNC connector with an additional alligator clip ground lead.
|
Click to zoom |
CT3288RA Oscilloscope probe x10, Lt Grey - 500MHz, 1.2m, Readout. High performance as well as cost effectiveness for your high frequency scope applications. Readout actuator equipped. The probe is compatible with popular scopes from Agilent and Tektronix.
|
