AC CURRENT PROBE (100A, 1mA/A, Jack)

Description: The 100.185 is a high accuracy mini probe for measurements to 120AAC. This probe uses a special magnetic core to provide higher accuracy and lower phase shift. The 100.185 provides an output signal of 1mAAC/AAC. The output termination are standard 4mm banana jacks

AmpFlex® 1000A, 24", 1mV/A

Description: The AmpFlex^® is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 1000A. Output signal is 1mV/A. Sensor length is 24".

Features:

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Applications:

• Measuring wide bus bars
• Measuring crowded circuit breaker panels
• Measuring around large cable bundles
• Measuring in any traditional application
• Measuring around irregular shapes

AmpFlex® 100/1000A, 24", 10mV/1mV/A

Description: The AmpFlex^® is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 1000A. Output signal is 10mV/A and 1mV/A. Sensor length is 24".

Features:

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Applications:

• Measuring wide bus bars
• Measuring crowded circuit breaker panels
• Measuring around large cable bundles
• Measuring in any traditional application
• Measuring around irregular shapes

AmpFlex® 1000A, 36", 1mV/A

Description: The AmpFlex^® is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 1000A. Output signal is 1mV/A. Sensor length is 36".

Features:

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Applications:

• Measuring wide bus bars
• Measuring crowded circuit breaker panels
• Measuring around large cable bundles
• Measuring in any traditional application
• Measuring around irregular shapes

AmpFlex® 100/1000A, 36", 10mV/1mV/A

Description: The AmpFlex^® is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 1000A. Output signal is 10mV/A and 1mV/A. Sensor length is 36".

Features:

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Applications

• Measuring wide bus bars
• Measuring crowded circuit breaker panels
• Measuring around large cable bundles
• Measuring in any traditional application
• Measuring around irregular shapes

AmpFlex® 1000/10,000A, 36", 1mV/0.1mV/A

Description: The AmpFlex^® is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 10,000A. Output signal is 1mV/A and 0.1mV/A. Sensor length is 36".

• Accuracy 1% of Reading
• TRMS measurements when connected to a TRMS instrument
• No core saturation or damage if overloaded
• Waterproof sensor
• Shape Memory for custom pre-shaping of sensor before use
• Very high frequency response
• Low phase shift for power measurements
• Insensitive to DC, measures only AC component on DC + AC signals
• Excellent linearity
• Lightweight

Applications:

• Measuring wide bus bars
• Measuring crowded circuit breaker panels
• Measuring around large cable bundles
• Measuring in any traditional application
• Measuring around irregular shapes

MN100 Series AC Current Probes (10A-1mV/mA, 100A-1mV/A, Jack)

Description: The 1031.02 measures leakage current and low currents from 1mA, and measures current on 5A secondaries. Provides AC current measuring capabilities to instruments with mV inputs. The output of the 1031.02 is a 5ft lead with safety 4mm safety plug

Features:

The 1031.17 is a general purpose mini probe for tight areas such as crowded wiring. It extends DMM AC measurements to 150AAC. The output of the 1031.17 is a 5 ft lead

Applications:

The DC/AC Microprobe Catalog 1200.67 measures as low as 100µAAC or DC. The unit has proportional mV output for direct readings on DMMs, loggers and oscilloscopes

Features:

AC/DC Current Probe Catalog 1200.68 (60A-10mV/A, 600A-1mV/A, Lead)

Description: The 1200.68 is a general purpose 400AAC or 600ADC current probe designed for use with DMMs, loggers or oscilloscopes and other instruments that have voltage inputs. The 1200.68 offers dual ranges of 40 and 400AAC or 60 and 600ADC. The 1200.68 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.

AC/DC Current Probe Catalog 1200.69 (150A-10mV/A, 1500A-1mV/A, Lead)

Description: The 1200.69 is a general purpose 1500AAC or DC current probe designed for use with DMMs, loggers, oscilloscopes and other instruments that have voltage inputs. The 1200.69 has dual selectable range probes. The 1200.69 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs. The jaw design on these probes make then well-suited for measuring current in both cable and bus bar type conductors.

Features:

• Measurement range of 100AAC/150ADC & 1000AAC/1500ADC
• Conforms to EN 61010, 600V CAT III
• Designed for DMMs, recorders, oscilloscopes, power and harmonic meters

Applications:

• DC motors
• Batteries
• Automobile engine testing
• Power measuring quality analysis
• Power load monitoring

AC Current Probe Catalog 1200.72 (60A-10mV/A, 600A-1mV/A, BNC)

Description: The 1200.72 is designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs. The probe has a 6.5 ft (1.98m) lead terminated by a BNC connector.

Features:

• Measurement range of 400AAC/600ADC
• Conforms to EN 61010, 600V CAT III
• Low phase shift for power measurements
• Designed for DMMs, recorders, oscilloscopes, power and harmonic meters

Applications:

• DC motors
• Batteries
• Automobile engine testing
• Power measuring quality analysis
• Power load monitoring

AC Current Probe Catalog 1200.73 (150A-10mV/A, 1500-1mV/A, BNC)

Description: The 1200.73 is designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs. The probe has a 6.5 ft (1.98m) lead terminated by a BNC connector.

Features:

• Measurement range of 100AAC/150ADC & 1000AAC/1500ADC
• Conforms to EN 61010, 600V CAT III
• Designed for oscilloscopes, waveform displaying instruments and other frequency sensitive displaying instruments with BNC inputs

Applications:

• DC motors
• Batteries
• Automobile engine testing
• Power measuring quality analysis
• Power load monitoring

AC Current Probe Catalog 1201.07  (500A, 1mVDC/AAC, Lead)

Description: The 1201.07 is built for ruggedness, versatility and ease of use. It is a general purpose 500A current probe, but with mVDC output for recorders, loggers and other instruments with mVDC inputs. Output termination is double insulated 5 ft lead with safety banana plugs.

Features:

• Unique hook-shaped jaws that enable the user to "pry" into or "hook" onto cables
• Maximum conductor size is 2 x 500kcmil
• Works as a traditional current transformer with ratio of 1000:1

Applications:

• Electrical utility
• HVAC
• Industrial maintenance
• Laboratory
• Plant maintenance

AC Current Probe Catalog 1201.36  (600A, 1mA/A, Lead) HA*

Description: The 1201.36 is a high accuracy 600A current probe. It has excellent frequency and phase shift characteristics. Output termination is double insulated 5 ft lead with safety banana plugs.

Features:

• Unique hook-shaped jaws that enable the user to "pry" into or "hook" onto cables
• Maximum conductor size is 2 x 500kcmil
• Works as a traditional current transformer with ratio of 1000:1

Applications:

• Electric Utility
• Field testing
• HVAC
• Industrial maintenance