Clamp-On Meter Catalog 2117.22 (AC/DC, 400AAC/DC, 600VAC/DC, Ohms, Continuity)

Description: The Clamp-on Meter Catalog 2117.22 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Catalog 2117.22 is auto-ranging, and provides the user with AC Volts, DC Volts, AC Amperes, DC Amperes, resistance, and continuity.

The large and complete 4000-count LCD features comprehensive user interface symbols such as a low battery indicator. It is equipped with a Data Hold function, which freezes the measurement. The Catalog 2117.22 is compact for comfortable one-handed operation, and the hooked jaw design is easy to maneuver in crowded wiring and breaker panels. The jaw opening for the Catalog 2117.22 is 1.1" (28mm).

Features:

Clamp-On Meter Catalog 2117.49 (Dual Display, TRMS, AC Amps, AC/DC Volts, Ohms, Continuity, Frequency, & Temperature)

This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.

The Catalog 2117.49 is sized for comfortable, one-handed operation. The tapered and hooked jaw design facilitates maneuvering in crowded wiring and breaker panels, making it easy to select conductors. The jaw opening accommodates one 750kcmil cable or two 350kcmil cables. The large and easy-to-read 9999-count LCD features comprehensive user information symbols, such as low battery, polarity, overload, and an analog bargraph for easy trend readings. The Catalog 2117.49 is equipped with a Data Hold function that freezes the measurement for later viewing, Min/Max, and Peak function for capture of signals. This Catalog 2117.49 is a True RMS clamp-on meter that provides RMS measurements for today's non-linear electrical environments.

Features:

• Standard size, full function clamp-on meter
• 1000AAC current measurements
• 1400VDC volt measurements
• TRMS measurements
• Resistance measurement to 10,000Ω
• Continuity with beeper below 35Ω
• Frequency measurements from V and A
• 1ms Peak function for fast capture of signals
• Hold function to "freeze" readings
• Designed to measure Amps and Volts at the same time
• Push-button for easy ADC zeroing
• Large easy-to-read 9999-count backlit display
• Includes test leads and soft carrying case

Applications:

• Commercial, industrial, residential and HVAC troubleshooting
• Power panel, junction box and battery bank monitoring
• AC or DC motor testing
• Power plant troubleshooting
• Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers

Clamp-On Meter Catalog 2117.50 (Dual Display, TRMS, AC/DC Amps & Volts, Ohms, Continuity, Frequency & Temperature)

Updated Operating Temperature Specification:
-14° to 122°F (-25 to 50°C), 80% RH, non-condensing

The AEMC^® Catalog 2117.50 is a general purpose professional clamp-on meter that measures up to the toughest standards. This meter offers a complete set of measurement ranges (AC Amps, DC Amps, AC Volts, DC Volts, Ohms, Continuity with beeper, Frequency from V or A, and Temperature) and is in compliance with international safety and quality standards to ensure professional and reliable measuring tools.

This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.

The Catalog 2117.50 is sized for comfortable, one-handed operation. The tapered and hooked jaw design facilitates maneuvering in crowded wiring and breaker panels, making it easy to select conductors. The jaw opening accommodates one 750kcmil cable or two 350kcmil cables. The large and easy-to-read 9999-count LCD features comprehensive user information symbols, such as low battery, polarity, overload, and an analog bargraph for easy trend readings. The Catalog 2117.50 is equipped with a Data Hold function that freezes the measurement for later viewing, Min/Max, and Peak function for capture of signals. This Catalog 2117.50 is a True RMS clamp-on meter that provides RMS measurements for today's non-linear electrical environments.

Features:

• Standard size, full function clamp-on meter
• 1000AAC/DC current measurements
• 1400VDC volt measurements
• TRMS measurements
• Resistance measurement to 10,000Ω
• Continuity with beeper below 35Ω
• Frequency measurements from V and A
• 1ms Peak function for fast capture of signals
• Hold function to "freeze" readings
• Designed to measure Amps and Volts at the same time
• Push-button for easy ADC zeroing
• Large easy-to-read 9999-count backlit display
• Includes test leads and soft carrying case

Applications:

• Commercial, industrial, residential and HVAC troubleshooting
• Power panel, junction box and battery bank monitoring
• AC or DC motor testing
• Power plant troubleshooting
• Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers

Clamp-On Meter Catalog 2117.54 (AC, 400AAC, 600VAC, Ohms, Continuity)

Description: The Clamp-on Meter Catalog 2117.54 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Catalog 2117.54 is auto-ranging, and provides the user with AC Volts, AC Amperes, resistance, and continuity. The large and complete 4000-count LCD features comprehensive user interface symbols such as a low battery indicator. It is equipped with a Data Hold function, which freezes the measurement. The Catalog 2117.54 is compact for comfortable one-handed operation, and the hooked jaw design is easy to maneuver in crowded wiring and breaker panels. The jaw opening for the Catalog 2117.54 is 1.1" (28mm).

Features:

Clamp-On Leakage Current Meter Catalog 2117.56 (TRMS, 60mA, 600mA, 100A, 600VAC/DC, Hz, Ohms, Continuity)

Description: The TRMS Clamp-On Leakage Current Meter Catalog 2117.56 is designed to measure low AC currents, which are typically leakage currents in ground conductors. Low currents are measured using either 60mA or the 600mA range. The high sensitivity of the probe (10µA and 100µA) is possible through special jaw construction and, in particular, critical shielding of the jaws. At low measurement levels, this shielding out of the noise is critical for low sensitivity, accuracy and stability.

The Catalog 2117.56 may be used as a standard clamp-on meter measuring to 100Arms, as well as AC Volts and DC Volts, resistance and continuity (with a buzzer).

The Catalog 2117.56 is ergonomic in design and fits well in the hand, facilitating one hand operation. The jaw size is compact yet designed to accommodate the most common conductors up to 1" (26mm) in diameter.

Clamp-On Meter Catalog 2117.66 (TRMS, 400AAC, 600VAC/DC, Ohms, Continuity)

Description: The Clamp-on Meter Catalog 2117.66 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Catalog 2117.66 is a True RMS clamp-on which provides RMS measurements for measuring in non-linear electrical environments.

This clamp-on multimeter is auto-ranging, and provides the user with AAC,VAC, VDC, Ohms, Continuity, as well as a frequency measurement function. The jaw opening for the Catalog 2117.66 is 1.1" (28mm).

Features:

Clamp-On Meter Catalog 2117.67 (AC, 1000AAC, 750VAC/1000VDC, Hz, Ohms, Continuity)

Description: The Clamp-on Meter Catalog 2117.67 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Catalog 2117.67 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.

The Catalog 2117.67 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function.

The Catalog 2117.67 is sized for a comfortable, one-handed operation. This catalog is average sensing and designed for traditional average responding electrical systems. The jaw opening for the Catalog 2117.67 is 1.575" (40mm).

Features:

Clamp-On Meter Catalog 2117.68 (TRMS, 1000AAC, 750VAC/1000VDC, Hz, Ohms, Continuity)

Features:

• Standard size, full function clamp-on meter
• 1000AAC current measurements
• 750VAC/1000VDC volt measurements
• TRMS measurements
• Resistance measurement to 4000Ω
• Continuity with beeper below 40Ω
• Frequency measurements from V and A
• Diode test
• 1ms Peak function for fast capture of signals
• Hold function to "freeze" readings
• Large easy-to-read 4000-count display
• 42-segment analog bargraph
• Includes test leads and soft carrying pouch

Applications:

• Commercial, industrial, residential and HVAC troubleshooting
• Power panel, junction box and battery bank monitoring
• AC or DC motor testing
• Power plant troubleshooting
• Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers

Leakage Current Probe Catalog 2125.52 (4A-1V/A, 400A-1mV/A output)

Description: The Catalog 2125.52 measures leakage current shunted to ground caused by insulation faults. It enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting.

It is designed specifically for locating low current faults on high current loads. The detector is a sensitive nickel alloy AC current transformer capable of measuring differential or leakage current as low as 500µA, and may be used to measure current up to 400A continuous duty.

The Catalog 2125.52 provides two output ranges: 1mV/mAac or 1mV/Aac. The output leads are terminated with standard 4mm banana plugs capable of interfacing with any standard multimeter. With its 4" jaw opening and range of 500µA to 200A, the Catalog 2125.52 provides a versatile way to analyze unbalanced current measurements, leakage values on grounding conductors and ground loop currents.

Clamp-on Meter Catalog 2129.50 (TRMS, 400AAC/DC, 600VAC/DC, kW, kVAR, kVA, Ohms, Continuity, Phase Rotation)

Description: The Catalog 2129.50 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities. Integrating a fast microprocessor sampling at a high rate, this meter is completely automatic and performs TRMS measurements on the most distorted waveforms.
The Catalog 2129.50 automatically detects AC or DC in Voltage and Current. It has a V-Live^TM function to warn of the use of live circuits or elevated voltages. This meter can measure inrush currents from 1 cycle up to 10 cycles and frequency. It also measures Phase Rotation (using only two leads!), Power Factor and Power. Other features include: auto-ranging, 4000-count display and Auto-Off.

• Hand-held size, ultra practical and ergonomic design
• TRMS measurement through fast sampling - accurate on non-linear waveforms
• AC or DC and AC+DC measurement in V and A
• 4kHz Bandwidth
• 3.5 Crest Factor at 600Arms and 900Vrms
• Peak function captures 500µs signals
• Measure Inrush Current on 0.5, 1, 2.5, 5 and 10 cycles (15 to 70Hz)
• Min/Max automatic capture of extreme values at 100ms samples
• Measure V, A, Ohms, kW, Hz, Phase Rotation, AC + DC
• Continuity at programmable buzzer threshold from 1 to 40Ω
• Selectable V-Live^TM function (buzzer) warns of live circuit
• Automatic DC current zeroing
• Backlit LCD
• Battery life displayed directly in hours at the push of a button
• EN 61010-1, EN 61010-2-032, 600V Cat. III
• Includes soft carrying case and test leads

Applications:

• Electrical maintenance
• Electrical power distribution
• Safety lighting system maintenance
• Automotive test troubleshooting
• Industrial maintenance
• HVAC

Clamp-on Meter Catalog 2129.53 (TRMS, 400AAC/DC, 600VAC/DC, kW, Ohms, Continuity, Phase Rotation) 

Description: The Catalog 2129.53 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities.
Integrating a fast microprocessor sampling at a high rate, the Catalog 2129.53 is completely automatic and performs TRMS measurements on the most distorted waveforms. The Catalog 2129.53 automatically detects AC or DC in Voltage and Current. It has a V-Live^TM function to warn of the use of live circuits or elevated voltages. The Catalog 2129.53 can measure in-rush currents from 1 cycle up to 10 cycles and frequency. It also measures Phase Rotation (using only two leads!), Power Factor and Power. Other features include: auto-ranging, 4000-count display and Auto-Off.

Features:

• Hand-held size, ultra practical and ergonomic design
• TRMS measurement through fast sampling - accurate on non-linear waveforms
• 4kHz Bandwidth
• 3.5 Crest Factor at 600Arms and 900Vrms
• Peak function captures 500µs signals
• Measure Inrush Current on 0.5, 1, 2.5, 5 and 10 cycles (15 to 70Hz)
• Min/Max automatic capture of extreme values at 100ms samples
• Measure V, A, Ohms, kW, Hz, Phase Rotation, AC + DC
• Continuity at programmable buzzer threshold from 1 to 40Ω
• Selectable V-Live^TM function (buzzer) warns of live circuit
• Automatic DC current zeroing
• Backlit LCD
• Battery life displayed directly in hours at the push of a button
• EN 61010-1, EN 61010-2-032, 600V Cat. III
• Includes soft carrying case and test leads

Applications:

• Electrical maintenance
• Electrical power distribution
• Safety lighting system maintenance
• Automotive test troubleshooting
• Industrial maintenance
• HVAC

Clamp-on Meter Catalog 2129.54 (TRMS, 400AAC/DC, 600VAC/DC, Hz, Ohms, Continuity, Temperature)

Description: The Catalog 2129.54 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities.
Integrating a fast microprocessor sampling at a high rate, the Catalog 2129.54 is completely automatic and performs TRMS measurements on the most distorted waveforms. The Catalog 2129.54 measures TRMS Voltage and Current and can incorporate the DC component of the signal for the Truest RMS. It has a V-Live^TM function to warn of the use of live circuits or elevated voltages.Temperature measurements up to 1832°F (1000°C) can be taken via standard K thermocouple. The Catalog 2129.54 can measure in-rush currents from 1 cycle up to 10 cycles and frequency. Other features include: auto-ranging, 4000-count display and Auto-Off.

Features:

Leakage Current Probe Model 2620 (4A-1V/A, 400A-1mV/A output)

Description: The Model 2620 measures leakage current shunted to ground caused by insulation faults. It enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting.

It is designed specifically for locating low current faults on high current loads. The detector is a sensitive nickel alloy AC current transformer capable of measuring differential or leakage current as low as 500µA, and may be used to measure current up to 400A continuous duty.

The Model 2620 provides two output ranges: 1mV/mAac or 1mV/Aac. The output leads are terminated with standard 4mm banana plugs capable of interfacing with any standard multimeter. With its 4" jaw opening and range of 500µA to 200A, the Model 2620 provides a versatile way to analyze unbalanced current measurements, leakage values on grounding conductors and ground loop currents.

Clamp-On Meter Model 500 (AC, 400AAC, 600VAC, Ohms, Continuity)

Description: The Clamp-on Meter Model 500 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Model 500 is auto-ranging, and provides the user with AC Volts, AC Amperes, resistance, and continuity. The large and complete 4000-count LCD features comprehensive user interface symbols such as a low battery indicator. It is equipped with a Data Hold function, which freezes the measurement. The Model 500 is compact for comfortable one-handed operation, and the hooked jaw design is easy to maneuver in crowded wiring and breaker panels. The jaw opening for the Model 500 is 1.1" (28mm).

Features:

Clamp-On Meter Model 502 (TRMS, 400AAC, 600VAC/DC, Ohms, Continuity)

Description: The Clamp-on Meter Model 502 is a general-purpose professional clamp-on. A strong mechanical case design, quality materials, full ranges and compliance to international safety and quality standards ensure a professional and reliable tool. The Model 502 is a True RMS clamp-on which provides RMS measurements for measuring in non-linear electrical environments.

This clamp-on multimeter is auto-ranging, and provides the user with AAC,VAC, VDC, Ohms, Continuity, as well as a frequency measurement function. The jaw opening for the Model 502 is 1.1" (28mm).

Features: