Clamp-on Meter Model F09 (TRMS, 400AAC/DC, 600VAC/DC, kW, kVAR, kVA, Ohms, Continuity, Phase Rotation)

Description: The Model F09 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities. Integrating a fast microprocessor sampling at a high rate, this meter is completely automatic and performs TRMS measurements on the most distorted waveforms.
The Model F09 automatically detects AC or DC in Voltage and Current. It has a V-Live^TM function to warn of the use of live circuits or elevated voltages. This meter can measure inrush currents from 1 cycle up to 10 cycles and frequency. It also measures Phase Rotation (using only two leads!), Power Factor and Power. Other features include: auto-ranging, 4000-count display and Auto-Off.

• Hand-held size, ultra practical and ergonomic design
• TRMS measurement through fast sampling - accurate on non-linear waveforms
• AC or DC and AC+DC measurement in V and A
• 4kHz Bandwidth
• 3.5 Crest Factor at 600Arms and 900Vrms
• Peak function captures 500µs signals
• Measure Inrush Current on 0.5, 1, 2.5, 5 and 10 cycles (15 to 70Hz)
• Min/Max automatic capture of extreme values at 100ms samples
• Measure V, A, Ohms, kW, Hz, Phase Rotation, AC + DC
• Continuity at programmable buzzer threshold from 1 to 40Ω
• Selectable V-Live^TM function (buzzer) warns of live circuit
• Automatic DC current zeroing
• Backlit LCD
• Battery life displayed directly in hours at the push of a button
• EN 61010-1, EN 61010-2-032, 600V Cat. III
• Includes soft carrying case and test leads

Applications:

• Electrical maintenance
• Electrical power distribution
• Safety lighting system maintenance
• Automotive test troubleshooting
• Industrial maintenance
• HVAC

Description: Clamp meter with built-in AC Voltage detector and flashlight

Features:

• Measures 200A AC Current up to 100mA resolution
• 3% basic ACA accuracy
• 0.7" (18mm) jaw opening; 300MCM cable size
• 2000 count LCD display
• Non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip
• Built-in white LED flashlight
• Measures Frequency up to 1kHz with 0.01Hz resolution
• Autoranging with Auto Power Off and Data hold function

Description: Compact size AC Clamp meter with built-in AC Voltage detector and Flashlight

Features:

• 0.7" (18mm) jaw opening
• 2000 count backlit LCD display
• Non-contact AC Voltage detector (100 to 600VAC) via clamp tip
• Built-in white LED flashlight
• Continuity and Diode Test, Max Hold, Auto power off

Integrated Non-Contact Voltage Detector

Features:

• True RMS for accurate readings of non-sinusoidal waveforms
• Built-in non-contact Voltage detector with LED alert
• 2.0" (52mm) jaw size for conductors up to 500MCM
• Dual 40,000/4000 count, backlit LCD display
• Includes Multimeter and Type K Temperature functions
• Inrush function captures transients during motor startups
• Relative Mode for Capacitance Zero and Offset Adjustment
• Data Hold, Peak Hold, MIN/MAX, and Auto Power Off
• Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case

Description: AC Current model to meet your application needs

Features:

• 2000 count LCD display
• High accuracy for Current measurements
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Continuity beeper and Diode test
• Data Hold, Max Hold
• Overload protection for all ranges
• Overrange and low battery indicators
• Autoranging with Auto Power Off
• Complete with test leads, case and two AAA batteries

Description: High accuracy for current measurements

Features:

• Functions include AC/DC Voltage, AC/DC Current, Capacitance, Frequency, Temperature, and Duty Cycle
• High accuracy for Current measurements
• 4000 count LCD display
• Data Hold, Auto Zero
• Autoranging with Auto Power Off
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Compact size allows measurements in tight locations
• Complete with test leads, Type K bead wire probe (-22 to 572°F/-30 to 300°C), case, and two AAA batteries

Description: AC Clamp-on meter with Integrated Non-Contact Voltage Detector

Features:

• Built-in non-contact Voltage detector with LED alert to quickly check for the presence of live wires before testing
• 1.2" (30mm) jaw size for conductors up to 500MCM
• 4000 count, backlit LCD display
• Multimeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode, and Continuity
• Relative Mode for Capacitance Zero, and Offset Adjustment
• Data Hold and MIN/MAX, Auto Power Off
• Complete with test leads, temperature probe (-22 to 572°F/-30 to 300°C), two AAA batteries, and carrying case

Description: AC Current Clamp Meter with Built-In Non-Contact Voltage Detector

Features:

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero, and Offset Adjustment
• Data Hold and MIN/MAX, Auto Power Off
• Complete with test leads, Type K temperature probe (-22 to 572°F/-30 to 300°C), two AAA batteries, and carrying case

Description: Measurements include µA Current and Temperature

Features:

• Display Current and multimeter measurements simultaneously
• Wide Capacitance, Temperature, and Frequency ranges
• Test lead µA range with high 0.1µA resolution for HVAC and Process control applications
• Data/MAX hold and Auto off

Description: True RMS AC Current Clamp Meter with Built-In Non-Contact Voltage Detector

Features:

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• 1.5" (40mm) jaw size for conductors up to 500MCM
• 6000 count, backlit LCD display
• Relative Mode for Capacitance Zero and Offset Adjustment
• Data Hold and MIN/MAX, Auto Power Off
• Complete with test leads, Type K bead wire temperature probe (-22 to 572°F/-30 to 300°C), 9V battery and carrying case

Description: True RMS AC/DC Current Clamp Meter with Built-In Non-Contact Voltage Detector

Features:

• AC/DC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• 1.5" (40mm) jaw size for conductors up to 500MCM
• 6000 count, backlit LCD display
• Relative Mode for Capacitance Zero and Offset Adjustment
• Data Hold and MIN/MAX, Auto Power Off
• Complete with test leads, Type K bead wire temperature probe (-22 to 572°F/-30 to 300°C), 9V battery and carrying case