Simple Logger II Catalog 2126.01 (1-CHANNEL, TRMS, 600A)

The Simple Logger^® II Catalog 2126.01 is a battery powered, one channel recording device with an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples.
The Simple Logger^® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software.

Features:

Simple Logger® II Catalog 2126.02 (1-Channel, TRMS, 0 to 1VAC, DataView® Software)

Description: The Simple Logger^® II Catalog 2126.02 is a one channel recording device powered by an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger^® II Control Panel within the DataView^® software).
The Simple Logger^® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software.
Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument's internal memory to the computer for analysis.

Features:

Simple Logger® II Catalog 2126.03 (2-Channel, TRMS, 0 to 1VAC, DataView® Software)

Description: The Simple Logger^® II Catalog 2126.03 is a two channel recording device powered by two alkaline batteries. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger^® II Control Panel within the DataView^® software).
The Simple Logger^® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software.
Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument's internal memory to the computer for analysis.

Features:

Simple Logger® II Catalog 2126.04 (1-Channel, TRMS, 0 to 1AAC, DataView® Software)

Description: The Simple Logger^® II Catalog 2126.04 is a one channel recording device powered by two alkaline batteries. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger^® II Control Panel within DataView^®).
Current can be measured and recorded with 0.1A resolution. Full scale measurement is probe dependent.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software.
Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument's internal memory to the computer for analysis.

Features:

• Compatible standard current probes with current output and banana plug connection
• 64 samples per cycle
• Programmable storage rates from 8 every second to 1 per day
• 3 user selectable storage modes
• Stores up to 240,000 measurements in non-volatile memory
• Powered by standard Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display Logger status
• Includes DataView^® software for data storage, real-time waveform display, analysis and report generation
• Isolated USB communication
• 50V Cat III

Applications:

• Fault current detection
• Intermittent problem detection
• Load profiling
• Neutral current monitoring
• Harmonic current recording using DataView^® software
• Metering CT resizing
• Demand recording

Features:

• TRMS voltage recording up to 600VAC/DC
• 64 samples per cycle
• Programmable storage rates from 8 every second to 1 per day
• 3 user selectable storage modes
• Stores up to 240,000 measurements in non-volatile memory
• Powered by standard Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display Logger status
• Includes DataView^® software for data storage, real-time waveform display, analysis and report generation
• Isolated USB communication
• 300V CAT IV; 600V CAT III

Applications:

• Surge and Sag recording
• Long term supply monitoring
• Industrial, commercial, residential monitoring
• Monitor voltage harmonics
• Find intermittent voltage problems
• Machine monitoring

Simple Logger® II Catalog 2126.06 (2-Channel, 4 to 20mADC, Current, DataView® Software)

Description: The Simple Logger^® II Catalog 2126.06 is a two channel 4-20mADC current data logger. The choice of data storage modes and storage rates allows the operator to effortlessly configure the logger to optimize memory usage to the application at hand. Extended Recording Mode (XRM^®) and delayed start time are just two of the many application friendly features.
The Simple Logger^® II Catalog 2126.06 records DC current at user selectable rates from 125 minutes to 1 day. Current can be measured up to 20mADC with 0.01mA resolution.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software.
Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument's internal memory to the computer for analysis.

Features:

• 2 independent input channels
• Current measured up to 20mADC with 0.01mA resolution.
• Programmable storage rates from 8 every second to 1 per day
• 3 user selectable storage modes; Stop when full, FIFO; XRM^®
• Stores up to 240,000 measurements in non-volatile memory
• Powered by two standard AA Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display Logger status
• Includes DataView^® software FREE for data storage, real-time display, analysis and report generation
• 50V Cat III

Applications:

• Process control monitoring and troubleshooting
• Sensor monitoring
• General DC current monitoring
• Profile temperature, pressure, flow and other parameters directly

Simple Logger® II Catalog 2126.07 (2-Channel, DC±100mV/1V/10VDC, DataView® Software) Replacement for Cat. #2114.05

Description: The Simple Logger^® II Catalog 2126.07 is a two channel DC data logger. The choice of data storage modes and storage rates allows the operator to effortlessly configure the logger to optimize memory usage to the application at hand. Extended Recording Mode (XRM^TM) and delayed start time are just two of the many application friendly features.
The Simple Logger^® II Catalog 2126.07 records DC voltage at user selectable rates from 8 per second to 1 per day. Voltages can be measured up to 10V with 0.01V resolution in user selectable ranges of 0-100mV, 0-1V and 0-10VDC.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software. Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument's internal memory to the computer for analysis.

Features:

• 2 independent input channels
• User-selectable ranges of 0 to 100mV; 0 to 1V and 0 to 10VDC per channel
• Programmable storage rates from 8 every second to 1 per day
• 3 user selectable storage modes; Stop when full, FIFO; XRM^®
• Stores up to 240,000 measurements in non-volatile memory
• Powered by two standard AA Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display Logger status
• Includes DataView^® software FREE for data storage, real-time display, analysis and report generation
• 50V CAT III

Applications:

• Circuit design troubleshooting
• Sensor monitoring
• Battery testing
• Power supply profiling

Simple Logger® II Catalog 2126.08 (2-Channel, Temperature Thermocouple, DataView® Software)

Description: The Simple Logger^® II Catalog 2126.08 is a two channel thermocouple data logger. The choice of data storage modes and storage rates allows the operator to effortlessly configure the logger to optimize memory usage to the application at hand. Extended Recording Mode (XRM^®) and delayed start time are just two of the many application friendly features.
The Simple Logger^® II Catalog 2126.08 records temperature at user selectable rates of 1 every 5 seconds to 1 per day. Using J,K,T,N,E,R or S thermocouples, it measures from -346º to + 1767ºF with resolution down to 0.1º (range dependent).
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software.
Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument's internal memory to the computer for analysis.

Features:

• 2 input channels
• User-selectable thermocouple types J, K, T, N, E, R, and S
• Programmable storage rates from 8 every second to 1 per day
• 3 user selectable storage modes; Stop when full, FIFO; XRM^®
• Stores up to 240,000 measurements in non-volatile memory
• Powered by two standard AA Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display Logger status
• Includes DataView^® software FREE for data storage, real-time display, analysis and report generation
• 50V Cat III

Applications:

• Process monitoring
• HVAC monitoring
• Refrigeration monitoring

Simple Logger® II Catalog 2126.09 (2-Channel, Temp/RH, DataView® Software)

Catalog 2126.09 stores measurements at user programmable rates of once every 5 seconds to 1 every day. Up to 240,000 measurements can be stored for a period of 45 days or more.

The 2126.09 incorporates a unique capacitive sensor element for measuring relative humidity while temperature is measured by a band-gap sensor. CMOSens^® technology guarantees excellent reliability and long term stability with high accuracy.

Analog information on the input is sampled and converted to a digital signal with up to 14 bit resolution. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument's internal memory to the computer for analysis.

One of the main advantages of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software. DataView^® is included with the 2126.09 and provides real time display of measurements, data analysis and report generation.

Features:

• Two input channels
• Integral Temperature Humidity sensor
• Programmable storage rates from once every 5 seconds to 1 per day
• Stores up to 240,000 measurements in non-volatile memory
• 3 user selectable storage modes
• Powered by standard Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display logger status
• Includes DataView^® software for data storage, real-time waveform display, analysis and report generation
• USB cable and batteries included
• EN 61010-1; 50V CAT III

Applications:

• Clean Rooms
• Blood Banks
• Humidors
• Wine Cellars
• Greenhouses
• Paper Mills

Simple Logger® II Catalog 2126.25 (1-Channel, DC, ±850V, DataView® Software)

Extended Recording Mode (XRM^®) and delayed start time are just two of the many application friendly features in this logger. Internal memory allows storing over 240,000 measurements, more than enough for most data collection needs. User programmable scale and engineering units are available. Battery operation and compact size allows for installation in tight locations without the need for external power. A series of front panel LEDs provide a quick status of the logger's state and memory usage.

DataView^® application software is included, providing real-time viewing of measurement data, even while recording. Instrument configuration, data storage and report generation from a pre-defined template or operator custom designed templates are also standard features.

Features:

• Bipolar DC voltage measurement up to 850VDC
• Programmable storage rates from 8 per second to 1 per day
• Stores up to 240,000 measurements in non-volatile memory
• 3 user selectable storage modes
• Alarm level programming quickly lets you see out of tolerance conditions
• Powered by standard Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display logger status
• Includes DataView^® software for data storage, real-time waveform display, analysis and report generation
• USB cable and batteries included
• EN 61010-1; 300V CAT IV; 600V CAT III

Applications:

• Railroad "third rail" monitoring
• Wind generation monitoring
• Electric cars
• Find intermittent problems
• Long term supply monitoring

Simple Logger® II Catalog 2126.29 (4-Channel, Event Logger, DataView® Software)

Description: The Simple Logger^® II Catalog 2126.29 is a four channel event data logger. It is a cost effective, advance design data logger incorporating features and functions not found in data loggers costing 2 to 3 times its price. Event data is stored only as the event occurs. It works with dry contact closure or 0-3 and 0-5VDC logic levels.

An internal memory allows storing over 50,000 events; more than enough for most data collection needs. Event measurement scaling is user programmable. Battery operation and compact size allows for installation in tight locations without the need for external power. A series of front panel LEDs provide a quick status of the logger's state and memory usage.

DataView^® application software is included, providing real-time viewing of measurement data, even while recording. Instrument configuration, data storage and report generation from a pre-defined template or operator custom designed templates are also standard features.

Features:

• Four input channels
• Works with dry contact closure or 0-3 and 0-5VDC logic levels
• Programmable storage rates from 8 every second to 1 per day
• Stores up to 50,000 measurements in non-volatile memory
• Powered by standard Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly display logger status
• Includes DataView^® software for data storage, real-time waveform display, analysis and report generation
• USB cable and batteries included
• EN 61010-1; 50V CAT III

Applications:

• Determine machinery run/down times
• Determine event sequencing
• Count events and record
• Record event duration

Simple Logger® II Catalog 2126.37 (2-Channel, TRMS, MiniFlex®, 100/1000A AC, DataView® Software)

Universal datalogger with RS-232 interface and PC Software

Features:

• Captures up to 8000 readings from Extech's Heavy Duty meters
• Selectable sampling rates (1 sec. to 99 hours)
• Complete with 4 AA batteries, PC software and cable

Simple Logger II Model CL601 (1-CHANNEL, TRMS, 600A)

The Simple Logger^® II Model CL601 is a battery powered, one channel recording device with an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples.
The Simple Logger^® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView^® software.

Features: