Resistance measurements are automatically calculated from 1µΩ to 400Ω with resolutions down to 1µΩ. The Catalog 2129.80 has selectable test currents of 10A, 1A, 100mA and 10mA and includes a polarity reversal function.

The Catalog 2129.80 is designed to conduct tests on both resistive and inductive material. Up to 99 measurements can be stored and printed directly to a printer or from a PC.

The DataView^® Software included allows you to configure the instrument, temperature compensate the test results, as well as, store data and print reports

Features:

• Measures from 1µΩ to 400Ω
• Test current selection from 10mA to 10A
• Manual temperature compensation (with DataView^® software)
• Front panel polarity reverse function
• Stores up to 99 test results
• Operator safety by automatic discharge of residual charge on the equipment under test
• Auto store of multiple test results
• Internal, rechargeable batteries conduct up to 850, 10A tests
• Built-in battery pack recharger recharges the batteries by connecting to the AC line using a standard line cord
• 4-Wire measurement with automatic compensation of undesirable voltages and lead resistance
• Large multi-function backlit display
• Direct display of the measurement with its units, range and test current
• Rugged, sealed case

Applications:

• Ground connections and continuity measurement
• Resistance measurements on motors and small transformers
• Contact resistance measurements on breakers and switches
• Component measurement
• Electrical cable resistance measurement
• Mechanical bond tests
• Wire to terminal connections
• Aircraft and rail bonds

The Catalog 2129.81 is uniquely designed to conduct tests on both resistive and inductive material, with operator selection directly from the front panel. Three test modes are available; resistive (instantaneous test), inductive (continuous test), and auto (repetitive test). Up to 1500 measurements can be stored and printed directly to a printer of from a PC

Features:

• Measures from 0.0001mΩ (0.1µΩ resolution) to 2500.0Ω
• Test current selection of 1mA, 10mA, 100mA, 1A and 10A
• RTD temperature probe to check tested sample (optional)
• Selectable metal types
• Automatic and manual temperature correction
• EMF levels measured and eliminated in measurement
• Two programmable alarm set points
• Stores up to 1500 test results
• Selectable Inductive and Resistance test modes
• Automatic multiple test mode (multiple tests without pressing the button)
• Large multi-line electroluminescent display
• Local or remote test setup and control
• Direct printout
• Internal rechargeable batteries - conduct up to 5000 10A tests
• Rugged, double insulated waterproof case
• CE Mark

Applications:

• Aerospace metallic coating resistance measurement
• Winding resistance measurement of motors and transformers
• Bonding verification on earth/ground systems
• Weld joint integrity verification
• Contact resistance measurement of breakers and switchgear
• Aircraft and rail bonding checks
• Wire to terminal connections and resistance checks
• Battery strap resistance checks
• Cable joint and bus bar connection checks
• Mechanical bond tests

Resistance measurements are automatically calculated from 1µΩ to 400Ω with resolutions down to 1µΩ. The Model 6240 has selectable test currents of 10A, 1A, 100mA and 10mA and includes a polarity reversal function.

The Model 6240 is designed to conduct tests on both resistive and inductive material. Up to 99 measurements can be stored and printed directly to a printer or from a PC.

The DataView^® Software included allows you to configure the instrument, temperature compensate the test results, as well as, store data and print reports

Features:

• Measures from 1µΩ to 400Ω
• Test current selection from 10mA to 10A
• Manual temperature compensation (with DataView^® software)
• Front panel polarity reverse function
• Stores up to 99 test results
• Operator safety by automatic discharge of residual charge on the equipment under test
• Auto store of multiple test results
• Internal, rechargeable batteries conduct up to 850, 10A tests
• Built-in battery pack recharger recharges the batteries by connecting to the AC line using a standard line cord
• 4-Wire measurement with automatic compensation of undesirable voltages and lead resistance
• Large multi-function backlit display
• Direct display of the measurement with its units, range and test current
• Rugged, sealed case

Applications:

• Ground connections and continuity measurement
• Resistance measurements on motors and small transformers
• Contact resistance measurements on breakers and switches
• Component measurement
• Electrical cable resistance measurement
• Mechanical bond tests
• Wire to terminal connections
• Aircraft and rail bonds

The Model 6250 is uniquely designed to conduct tests on both resistive and inductive material, with operator selection directly from the front panel. Three test modes are available; resistive (instantaneous test), inductive (continuous test), and auto (repetitive test). Up to 1500 measurements can be stored and printed directly to a printer of from a PC

Features:

• Measures from 0.0001mΩ (0.1µΩ resolution) to 2500.0Ω
• Test current selection of 1mA, 10mA, 100mA, 1A and 10A
• RTD temperature probe to check tested sample (optional)
• Selectable metal types
• Automatic and manual temperature correction
• EMF levels measured and eliminated in measurement
• Two programmable alarm set points
• Stores up to 1500 test results
• Selectable Inductive and Resistance test modes
• Automatic multiple test mode (multiple tests without pressing the button)
• Large multi-line electroluminescent display
• Local or remote test setup and control
• Direct printout
• Internal rechargeable batteries - conduct up to 5000 10A tests
• Rugged, double insulated waterproof case
• CE Mark

Applications:

• Aerospace metallic coating resistance measurement
• Winding resistance measurement of motors and transformers
• Bonding verification on earth/ground systems
• Weld joint integrity verification
• Contact resistance measurement of breakers and switchgear
• Aircraft and rail bonding checks
• Wire to terminal connections and resistance checks
• Battery strap resistance checks
• Cable joint and bus bar connection checks
• Mechanical bond tests