FEATURES:

Description: Precision source for calibrating process devices and measuring DC process signals

Features:

• Oyster case with flip-up display is ideal for handheld or benchtop applications
• Large 3-1/2 digit LCD display and touch keypad
• Display readings in mA or as a % of the 0 to 24mA range or as mV in voltage ranges
• Provides 0 to 24mA output displayed as mA or %
• Provides 24VDC power to measure a two-wire current loop

Description: Precision source for calibrating process devices and measuring DC process signals

Features:

• Oyster case with flip-up display is ideal for handheld or benchtop applications
• Large 3-1/2 digit LCD display and touch keypad
• Display readings in mA or as a % of the 0 to 24mA range or as mV in voltage ranges
• Provides adjustable 0 to 24mA and 0 to 10V calibration source

Description: Precision source and measure for thermocouple, mA, mV, and V devices

Features:

• Source 0 to 24mA with 0.01mA resolution
• Measure 0 to 50mA (0.1mA resolution)
• Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV
• Output 0 to 1999mV or 0 to 10.00V
• Measure 0 to 19.99V
• Single/continuous step function for Voltage and Current
• Self-contained 24V loop power supply drives current loads up to 1000Ohm
• 5 stored calibration values of each type for fast calibrations
• Complete with six AA batteries and calibration cable with spade lug terminals

Note: Discontinued Product - No Replacement. Accurate calibration source for Thermocouple, mA, mV, V and Frequency devices

Features:

• Source DC Current ranges with high 0.001mA resolution
• Maximum current load 1000Ohm
• User can set output steps from 1% to 100%
• Large 5 digit LCD
• Automatic ramp output
• Beeps if load is open with Current (mA) output or shorted with Voltage output

Description: Source and measure 8 thermocouple type devices J, K, T, E, C, R, S, and N

Features:

• One model for multiple thermocouple types with precision output displayed as mV or °C/°F
• Microprocessor assures maximum accuracy to 0.15% of reading over wide ranges
• High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters,controllers or recorders.
• Complete with 115V AC adaptor

Discontinued Product - Replaced by 412400 

Description: Precision DC, mA, Voltage, Frequency Calibrator combined with True RMS MultiMeter 

Features:

• Simultaneous source/simulate and measure on large dual display
• Constant current output for loads up to 1200Ohm
• Bipolar current (±25mA) and voltage (±1.5V, ±15V) outputs
• Measure DCmA, ACmA, DCV, ACV, AC+DC, Temperature, Frequency, Duty Cycle, Pulse Width, Resistance, Continuity, and Diode
• True RMS measurement for non-linear voltage and current loads

Description: Provides a stable blackbody target for calibrating non-contact IR thermometers

Features:

• Ideal for calibration of non-contact InfraRed Thermometers up to 662°F (350°C)
• Large 2.25" (57mm) blackbody target for a wide field of view area
• Dual display for set temperature and blackbody temperature
• Complete with power cord (110V AC)