Compact, battery operated appliance tester for analyzing AC power loads

Features:

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Sampling (update) rate is 2.5 times/second
• Can be used for data acquisition when connected to PC
• Software included to download and store data to a PC

Compact, battery operated datalogging appliance tester for analyzing AC/DC power loads

Features:

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Sampling (update) rate is 2.5 times/second
• Software included to download and store data to a PC

Front (100W) and Rear (2000W) Universal Output Sockets

Features:

• Standby Power Measurement (10mW to 100W) for desktop and notebook PCs, LCD TVs, AC adaptor/chargers
• For testing products from 85 to 250VAC, 45 to 65Hz
• Standard Power Measurement:
  • 100mW to 1000W (110V)
  • 100mW to 2000W (220V)
• Power Quality Measurement (Watts, Power Factor, Voltage, Current, Harmonics)
• Cost Function calculates cost per day, month, and year
• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

Four clamps for power measurements on single phase, 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlighting LCD display
• Displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage and current of the three phases)
• Clamp-on True RMS power measurements with software for Harmonics analysis
• Current measurements to 1000A and Voltage measurements to 600V
• Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets

Description: Power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlit LCD displays up to 35 parameters in one screen
• True RMS power measurements with Harmonics display (1-99th order)
• Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold
• Simultaneous Harmonics and Waveform display
• Measures Current and Voltage
• Datalogger records up to 52,428 records in single phase, 2 wire applications (17,476 in 3-phase 4-wire applications)

Power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlit LCD displays up to 35 parameters in one screen
• True RMS power measurements with Harmonics display (1-99th order)
• Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold
• Simultaneous Harmonics and Waveform display
• Measures Current and Voltage
• Datalogger records up to 52,428 records in single phase, 2 wire applications (17,476 in 3-phase 4-wire applications)

Description: 

Datalogging Power Analyzer (up to 30,000 sets of measurements)

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V
• MWH, MVAh, MVARh energy measurements
• Adjustable CT ratio (1 to 600) and PT ratio (1 to 1000)
• Automatically logs up to 30,000 sets of measurements with 2GB SD memory card
• User-programmable sampling time from 2 to 7200 seconds

Description: Complete with 1200A 12" flexible current clamp probes

Features:

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform
• Display of Waveform with Peak Values (1024 samples/period)
• Analysis of Total Harmonic Distortion (THD-F)
• Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
• Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)
• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
• Calculated Unbalanced Current through Neutral Line (In)
• Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
• Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
• Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case

Description: Complete with 3000A 18" flexible current clamp probes

Features:

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform
• Display of Waveform with Peak Values (1024 samples/period)
• Analysis of Total Harmonic Distortion (THD-F)
• Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
• Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)
• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
• Calculated Unbalanced Current through Neutral Line (In)
• Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
• Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
• Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case

Description: Datalogging Power Analyzer (up to 30,000 sets of measurements)

Features:

• Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu
• Full system analysis with up to 35 parameters:
  • V (phase-to-phase), V (phase-to-ground)
  • A (phase-to-ground)
  • KW / KVA / KVAR / PF (phase)
  • KW / KVA / KVAR / PF (system)
  • KWH / KVAH / KVARH / PFH (system)
  • Phase angle
• Optional 200A, 1200A Current Clamps or 3000A Flexible Current Probes
• Adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio for high power distribution systems
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
• Built-in Clock and Calendar