CLAMP-ON METER MOD 2117.70 (TRMS AC/DC)

Updated Operating Temperature:
-14° to 122°F (-25 to 50°C), 80% RH, non-condensing

The Clamp-On Meter Catalog 2117.70 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Catalog 2117.70 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.

The Catalog 2117.70 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function. The Catalog 2117.70 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A.

The Catalog 2117.70 is sized for a comfortable, one-handed operation. This catalog is True RMS sensing responding to distorded signal electrical systems. The jaw opening for the Catalog 2117.70 is 1.575" (40mm).

Features:

Description: Functions include Power, Current, Insulation Resistance and Temperature (Type K)

Features:

• True Power, Aparent Power, Reactive Power, Horsepower, Power factor, Phase Angle with Lead/Lag indicator
• AC+DC µA Current with 10nA resolution for flame rod tests
• 9999 count LCD
• Type K Temperature measurement
• Min/Max, Data Hold, Auto power off

Applications: AC Power evaluation Motor/Generator installation and repair HVAC flame rod tests Capture max/min temperature or current values Category III rating for industrial measurements

Description: Measures Current, Insulation Resistance, Temperature (Type K) and Power

Features:

• 1.6" (40mm) clamp jaw opening and large dual LCD display (9999 count)
• Measures 1/3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR), Horsepower (HP), Power Factor, and Phase Angle with Lead/Lag indicator
• AC+DC µA current with 10nA resolution for flame rod tests
• Auto Detect AC/DC Voltage measurements with simultaneous frequency display
• Capacitance to 7000µF with 0.001µF resolution
• High Resistance tests to 100MOhm
• Type K, °C/°F switchable, temperature to 1000°F
• Diode and Continuity tests
• Complete with test lead kit, general purpose Type K thermocouple probe, carrying case, and 9V battery

Description: Datalogs up to 4000 readings

Features:

• 1000A Clamp measures 1f or 3f (phase) power to 600kW
• Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz
• Large 4-digit LCD with fast 40 seg. bargraph
• 25 point memory viewable on display
• Data Hold, Peak Hold, MIN/MAX and Auto Power Off
• Complete with meter, aligator clips, test leads, datalogger/RS-232 module and PC Software with cable

Description: Measures, computes, and displays 3-Phase Power on Balanced or Unbalanced Loads

Features:

• Display Lead/Lag Current/Voltage phase shift in degrees
• Store/recall last 5 readings
• DC Current Auto-Zero
• ual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz
• Advanced Relative and Min/Max functions

Description: Four clamps for power measurements on single phase, 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlighting LCD displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage an dcurrent of the three phases)
• Clamp-on True RMS power measurements with software for Harmonics analysis
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1000A and Voltage measurements to 600V kWH,
• kVARh and kVAh energy measurements Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets
• Programmable Start/Stop datalogging times
• PC interface with Windows 95/98/NT/2000/ME/XP compatible software for single and three phase voltage/current Waveform display and Harmonic analysis
• Phase sequence measurements
• Complete with 4 current clamps, 4 voltage leads with alligator clips, 8 AA batteries, software, PC interface cable, and carrying case

CLAMP-ON METER MOD 514 (TRMS AC/DC)

Updated Operating Temperature:
-14° to 122°F (-25 to 50°C), 80% RH, non-condensing

The Clamp-On Meter Model 514 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 514 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.

The Model 514 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function. The Model 514 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A.

The Model 514 is sized for a comfortable, one-handed operation. This model is True RMS sensing responding to distorded signal electrical systems. The jaw opening for the Model 514 is 1.575" (40mm).

Features: