Description: 

The BK 9130 is a fully programmable triple output DC Power Supply delivering 0-30V/0-3A on 2 outputs and 0-5V/0-3A on 1 output. Each output is fully floating and outputs can be adjusted independently or connected in series or parallel to produce higher voltages or currents. The BK 9130 is ideally suited for applications in Electronic Test, Production and Service, where multiple independent DC supplies are required and bench space is at a premium

The BK 9130 is designed to meet the needs of today's applications that require clean, reliable power and excellent performance. New microprocessor control circuitry permits the BK 9130 to offer unmatched temperature stability and a load regulation of 0.01% +3mV. The unit can power-up to the same state it was when it was powered-off. This allows the supply to go back to work as soon as power is restored whether the power-off was intentional or caused by a power outage. There is enough non-volatile memory to store up to 50 power supply settings allowing quick and easy testing when multiple voltage and current values are required. 

Features:

• 3 independent, fully programmable and electrically isolated outputs
• Display & adjust Voltage and Current settings for all 3 channels simultaneously
• Flexible output configuration: Operate in series or parallel tracking mode
• SCPI compatible command set. Communicate via USB interface using the included USB to TTL Serial Converter cable
• RS232 interface cable, converting from RS232 to TTL, is optional (order IT-E131)
• OVP (Over Voltage) and OTP (Over Temperature) protection
• Output on/off control
• Excellent stability and regulation
• Very compact foot print (rack mountable 2U x 1/2U)
• Application Software for front panel emulation and simple test sequence generation included
• 50 memory locations for instrument state storage & recall

Description:

The 1696 Programmable Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies. The RS 232 interface allows you to either remotely control the power supply or program a sequence of different voltages and current limits that can be used in a automated test application.

• RS 232 interface
• Data logging capability
• Output disable
• Over voltage protection
• Constant voltage operation
• Constant current operation (current limiting)
• Easy-to-use
• Large easy to read LCD displays
• RS 232 to RS 485 Adapter required for RS 485 applications

• RS 232 interface
• Data logging capability
• Output disable
• Over voltage protection
• Constant voltage operation
• Constant current operation (current limiting)
• Easy-to-use
• Large easy to read LCD displays
• RS 232 to RS 485 Adapter required for RS 485 applications

Description:

The 1698 Programmable Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies. The RS 232 interface allows you to either remotely control the power supply or program a sequence of different voltages and current limits that can be used in a automated test application.

• RS 232 interface
• Data logging capability
• Output disable
• Over voltage protection
• Constant voltage operation
• Constant current operation (current limiting)
• Easy-to-use
• Large easy to read LCD displays
• RS 232 to RS 485 Adapter required for RS 485 applications

Description:

Models 1785B, 1786B, 1787B & 1788 are Programmable DC Power Supplies that offer new levels of "ease of use" and programmable functionality. Direct key in entry makes voltage and current selection fast, accurate and easy. In case calibration allows for simple, cost savings, uninterrupted operation.

Features: 

• Sixteen user programmable preset outputs
• Controllable Output On/Off Switch
• 10mV/10mA setability resolution
• Closed case calibration
• Low ripple and noise
• Excellent temperature stability
• Serial interface cable and software included

Description:

Models 1785B, 1786B, 1787B & 1788 are Programmable DC Power Supplies that offer new levels of "ease of use" and programmable functionality. Direct key in entry makes voltage and current selection fast, accurate and easy. In case calibration allows for simple, cost savings, uninterrupted operation.

Features: 

• Sixteen user programmable preset outputs
• Controllable Output On/Off Switch
• 10mV/10mA setability resolution
• Closed case calibration
• Low ripple and noise
• Excellent temperature stability
• Serial interface cable and software included

Description:

Models 1785B, 1786B, 1787B & 1788 are Programmable DC Power Supplies that offer new levels of "ease of use" and programmable functionality. Direct key in entry makes voltage and current selection fast, accurate and easy. In case calibration allows for simple, cost savings, uninterrupted operation.

Features: 

• Sixteen user programmable preset outputs
• Controllable Output On/Off Switch
• 10mV/10mA setability resolution
• Closed case calibration
• Low ripple and noise
• Excellent temperature stability
• Serial interface cable and software included

Features:

• High resolution programmable output and two fixed outputs of 5V and 3.3V
• Selectable constant Voltage or Current modes
• Auto output of up to 200 steps with programmable Voltage, Current and time
• Programmable over Voltage protection
• Programmable over Current protection with 0 to 60 second delay timer
• Storage/Recall memory for 200 test setups
• Bi-directional RS-232 port for custom
• PC programming and automatic test setups
• High stability with low ripple and noise
• Dual output terminal for source and monitor connections
• Dual high contrast LCD display with backlighting

Description:

The 9124 is a laboratory grade, 0-72V/0-1.2A programmable DC Power Supply providing great performance and features not found in other supplies in this price category. The power supply was designed to meet the needs of today's applications in R&D design verification, production testing or university labs that require clean and reliable power, high resolution/accuracy and fast transient response time.

Features:

• Excellent display resolution
• Fast transient response time (<20ms)
• SCPI compatible
• RS232 interface (standard), USB optional
• Closed case calibration
• Compact size for bench use or rack mountable (2U x 1/2U size)
• DVM and Miliohm meter
• Discrete Fault Indicator/Remote Inhibit (DFI/RI). Useful for turning multiple power supplies On/Off simultaneously
• Application Software for front panel emulation and simple test sequence generation included
• Sheathed banana plug terminals for safety

The PSH-Series are single output, 360 to 1080W, programmable switching DC power supply. OVP, OCP, and OTP protect PSH-Series and loads from unexpected conditions. Remote sensing adds extra level of precision by compensating cable losses between loads. An LCD panel with simultaneous output/parameter view provides comfortable operation. Self-test and software calibration features also reduce maintenance overhead. SCPI commands and LabVIEW driver access through the RS-232C or optional GPIB interface provide remote control and ATE software development capability. Modular architecture, exclusive rear-panel output, and 19inch, 4U rack mounting option ensure that the PSH-Series is optimized for large systems.

Programmable Dual-Range D.C. Power Supply 0~+8V/20A; 0~+20V/10A

Programmable Dual-Range D.C. Power Supply 0~+15V/7A; 0~+30V/4A

FEATURES:

• High resolution: 1mV/1mA
• 0.01% load/line requlation, 350mVrms ripple
• Auto step runing with timer setting and 100 sets memory
• Safety design:OVP,OCP & OTP;output ON/OFF control
• Self-test and software calibration
• Highly visible vacuum-fluorescent display
• Front and rear output terminal
• Standard interface : RS-232C, GPIB

Programmable Dual-Range D.C. Power Supply 0~+30V/6A; 0~+60V/3.3A

FEATURES:

• High resolution: 1mV/1mA
• 0.01% load/line regulation, 350mVrms ripple
• Auto step runing with timer setting and 100 Sets memory
• Safety design: OVP,OCP & OTP;Output ON/OFF control
• Self-test and software calibration
• Highly visible vacuum-fluorescent display
• Front and rear output terminal
• Standard interface : RS-232C, GPIB