Non-contact rpm measurements up to 99,999rpm

Features:

• Large easy to read LCD display
• Hold button freezes displayed readings
• Ergonomically designed and pocket size housing with protective finger guard
• Non-contact integral light beam with ideal measurement range up to 6" (152mm) distance

Contact rpm and surface speed measurements up to 20,000rpm

Features:

• Large easy to read LCD display
• Hold button freezes displayed readings
• Ergonomically designed and pocket size housing with protective finger guard
• Surface wheels enable tachometer to measure linear surface speeds in ft/min, m/min, and yd/min

2-in-1 Meter with stroboscope to analyze rotating objects and Tachometer to measure rpms

Features:

• Stroboscope course and fine flash rate adjustments to freeze and analyze rotating objects
• Battery operation brings motion analysis to any location
• Unique display features characters that reverse direction depending on measurement mode
• Large 0.4" (10mm) 5 digit LCD display
• Microprocessor based with quartz crystal oscillator to maintain high accuracy
• Tachometer memory stores last, max, and min readings

Speed detection and analysis of rotating gears, fans, pumps, and motors

Features:

• Checks and analyzes motion and speed by simply aiming and synchronizing its flash rate (fpm) with a rotating object
• RPMs on 4 digit LED display
• High accuracy over a wide, dynamic range via exclusive microcomputer LSI circuit and crystal control time-base
• Ideal for measuring the speed of moving gears, fans, pumps, motors and other equipment
• Tripod mount for stationary use

Speed detection and analysis of rotating gears, fans, pumps, and motors

Features:

• Checks and analyzes motion and speed by simply aiming and synchronizing its flash rate (fpm) with a rotating object
• RPMs on 4 digit LED display
• High accuracy over a wide, dynamic range via exclusive microcomputer LSI circuit and crystal control time-base
• Ideal for measuring the speed of moving gears, fans, pumps, motors and other equipment
• Tripod mount for stationary use

Description: Measures Acceleration, Velocity and Displacement plus RPM and Linear Surface Speed

Features:

• Remote vibration sensor with magnetic adapter on 39"(1m) cable
• Wide frequency range of 10Hz to 1kHz
• RMS or Peak Value measurement modes
• Manual/Auto store/recall up to 1000 readings
• Data Hold and Auto shut-off
• Contact and Non-Contact (Laser) tachometer functions
• Uses a laser for greater distance non-contact measurements up to 4.9ft (1.5m)
• Large LCD with characters on display reverse direction depending on contact, photo, or vibration mode
• Windows® 95/98/NT/2000/XP compatible software (included) allows captured readings to be downloaded to your PC for further analysis

Fast and accurate rpm and surface speed measurements to 20,000rpm

Features:

• 0.05% basic accuracy
• Make contact measurements of rotating objects
• Measure linear surface speeds in ft/min or m/min using three accessory wheels provided
• Recalls Last/MAX/MIN values

Non-contact rpm measurements to 99,999rpm with integral light beam

Features:

• Make non-contact rpm measurements of rotating objects
• Use reflective tape on object to be measured and point the integral light beam
• Ideal measurement range up to 6" (152mm) distance
• Readings updated every second
• Recalls Last/MAX/MIN values

Combination Contact and Non-contact rpm measurements with visible light beam

Features:

• Characters on display reverse direction depending on contact or photo mode
• Uses visible light to read up to 6" (150mm) from target
• Memory/readings button holds last reading for 5 min and recalls min/max readings

Laser Light Source used for greater accuracy and longer measuring distance

Features:

• Make non-contact RPM measurements of rotating objects
• Use reflective tape on object to be measured and point the integral laser
• Large 5 digit LCD display with backlighting
• Memory button for Last/MAX/MIN readings
• Counter function counts up to 99,999 revolutions
• Rugged, double molded housing

Continuous & accurate readings from 5 to 99,990rpm

Features:

• Measure rpm from 5 to 99,990rpm with microprocessor quartz crystal accuracy of 0.05%
• Large LED display updates 1/sec (rpm<60)
• Resolution: 0.1rpm (5 to 1000rpm), 1rpm (1000 to 999rpm), 10rpm (10,000rpm to 99,990rpm)
• Unique design permits rpm measurements of a one hole gear or disk eliminating the need for special gears;
• Optional proximity and photo sensors

Built-in control and alarm relays with user adjustable high/low alarm limits

Features:

• Displays in RPM, m/min, and ft/min
• Large 0.5" (13mm) 4-digit LED display
• Tactile keypad for easy programming
• RS-232 interface with optional software
• Optional proximity and photo sensors

Combination Contact and Non-contact rpm measurements with laser

Features:

• Characters on display reverse direction depending on contact or photo mode
• Uses a Laser for greater distance non-contact measurements up to 6.5ft (2m)
• Memory/readings button holds last reading for 5 min and recalls min/max readings

Includes a non-contact IR Thermometer for surface temperature measurements