Rugged pH meter with pH electrode, Temp probe and carrying case

Features:

• Kit includes pH/mV/Temperature meter, mini pH electrode, Temperature probe, and carrying case
• Dual display for pH or mV and Temperature (°C/°F)
• Large 1.4" (36mm) LCD display
• Easy 2 point Slope and Cal adjustments at pH 4 and pH 7
• Manual and Auto Temperature Compensation using temperature probe
• Min/Max/Avg, Auto off and Data Hold
• Built-in RS-232 PC interface with optional Data Acquisition Software and Datalogger

Direct reading of Total Chlorine down to 0.01ppm

Features:

• Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes)
• Low detection limit down to 0.01ppm
• Unaffected by sample color or turbidity
• Memory stores, tags and recalls up to 15 readings
• US EPA approved as an acceptable method for wastewater compliance monitoring of Total Chlorine.

Reagent tablets for use with ExStik^® Chlorine Meter

Features:

• Includes 100 packs (10 tablets ea.)
• Requires 1 tablet per test - enough for 1000 tests
• Foil packaging provides very stable environment with long shelf life
• No messy powder reagents
• No dosing equipment required

4-in-1 multi-range sensor for measuring Conductivity, TDS, Salinity and Temperature

Features:

• Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution
• Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value
• Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
• Internal memory stores up to 25 labeled readings for easy recall
• Self calibration of electronics on power up
• Order Conductivity standards separately
• Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48"(1.2m) neckstrap

Supplies & Accessories:

EC405 - ExStik Replacement Conductivity Cell Module
EX006 - Weighted Base and Solution Cups Kit
EX007 - Spare Sample Solution Cups (24pk)
EX010 - ExStik 3ft Extension Cable with Probe Guard/Weight
EX050 - ExStik 16ft Extension Cable with Probe Guard/Weight
EC-84-P - 84µS Conductivity Standard (2 Bottles)
EC-1413-P - 1413µS Conductivity Standard (2 Bottles)
EC-12880-P - 12880µS Conductivity Standard (2 Bottles)
CA895 - Small Vinyl Carrying Case with Belt Loop

Waterproof meter with high accuracy multi-range sensor that measures four parameters

Features:

• Includes EC400 meter with sensor, 3 calibration standards, weighted base, 3 plastic cups, batteries and carrying case
• Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution
• Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value
• Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
• Internal memory stores up to 25 labeled readings for easy recall
• Self calibration of electronics on power up

Supplies & Accessories:

EC405 - ExStik^® Replacement Conductivity Cell Module
EX006 - Weighted Base and Solution Cups Kit
EX007 - Spare Sample Solution Cups (24pk)
EX010 - ExStik^® 3ft Extension Cable with Probe Guard/Weight
EX050 - ExStik^® 16ft Extension Cable with Probe Guard/Weight
EC-84-P - 84µS Conductivity Standard (2 Bottles)
EC-1413-P - 1413µS Conductivity Standard (2 Bottles)
EC-12880-P - 12880µS Conductivity Standard (2 Bottles)
CA895 - Small Vinyl Carrying Case with Belt Loop

Combination flat surface pH electrode with autoranging high accuracy Conductivity cell

Features:

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement
• Order Conductivity standards and pH buffers separately
• Complete with meter and electrode, protective cap, sample cup, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap

Supplies & Accessories:

EC505 - ExStik^® Replacement pH Electrode/Conductivity Cell Module
EX006 - Weighted Base and Solution Cups Kit
EX007 - Spare Sample Solution Cups (24pk)
EX010 - ExStik^® 3ft Extension Cable with Probe Guard/Weight
EX050 - ExStik^® 16ft Extension Cable with Probe Guard/Weight
CA895 - Small Vinyl Carrying Case with Belt Loop
EC-84-P - 84µS Conductivity Standard (2 Bottles)
EC-1413-P - 1413µS Conductivity Standard (2 Bottles)
EC-12880-P - 12880µS Conductivity Standard (2 Bottles)
PH103 - Tripak Buffer Pouches (4, 7 and 10pH plus rinse solution)
650470 - Tripak Dry Powder Buffer Capsules (4, 7 and 10pH)
PH4-P - 4pH Buffer Solution (2 Bottles)
PH7-P - 7pH Buffer Solution (2 Bottles)
PH10-P - 10pH Buffer Solution (2 Bottles)

7-in-1 Meter with Lab-Quality Performance

Features:

• Measures Conductivity, TDS, Salinity, Resistivity, pH, mV and Temperature
• Automatic one button pH calibration (4, 7, and 10pH)
• Choice of 3 point pH calibration for better accuracy
• One point Conductivity calibration - automatically recognizes 8 calibration solutions from USA, Europe and China series
• Automatic Temperature Compensation (non-linear compensation for purified water <10µS/cm to improve measuring accuracy)
• Memory stores up to 300 readings with series number, measured value and temperature
• Large blue backlit dual LCD display
• Auto power off saves battery life with disable function
• Waterproof housing
• Complete with pH/mV/Temperature electrode, polymer Conductivity cell, pH and Conductivity calbration solutions, batteries and hard carrying case

Supplies & Accessories:

EC605 - Conductivity Cell
PH305 - pH/mV/Temperature Electrode

Chlorine, pH and Temperature measurements with all the necessary accessories

Features:

• Includes CL200 meter, pH electrode, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
• 3-in-1 Water Quality Meter measures Chlorine, pH plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph
• Automatic electronic self calibration for Chlorine; 1, 2 or 3 point buffer calibration for pH
• Data Hold, Auto shut-off and low battery indication
• Simultaneous display of ppm or pH and °C/°F Temperature
• Automatic Temperature Compensation

Chlorine, pH, ORP and Temperature measurements with all the necessary accessories

Features:

• Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph
• Automatic electronic self calibration for Chlorine and ORP; 1, 2 or 3 point buffer calibration for pH
• Data Hold, Auto shut-off and low battery indication
• Simultaneous display of ppm or pH and °C/°F Temperature
• Automatic Temperature Compensation