AEMC MA114 MiniFlex (3A/1mV/mA, 30A/100mV/A, 300A/10mV/A, 3000A/1mV/A)

Descripton: The AEMC MA114 MiniFlex 14 in. Current Sensor (3A/1mV/mA, 30A/100mV/A, 300A/10mV/A, 3000A/1mV/A) is an AC current sensor composed of a flexible Rogowski coil and an electronic module. The sensor permits measurements on conductors where standard clamp-on probes cannot be used. It can be installed in tight spaces, around cable bundles, bus bars, or even wrapped around irregular shapes.

The Miniflex has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor is 14 in. (35cm) and clamp around conductor up to 4 in. (10cm). Four ranges are available, 3A/3V, 30A/3V, 300AV3V and 3000A/3V. The model MA114 is power by AA batteries or by a standard mains adapter (5Vdc, 100mA) by a type B micro-USB connector.

• 14 in. flexible sensor
• Capable of clamping around a 3.93 inch cable or bundle
• Can be installed in tight spaces, around cable bundles, bus bars, or even wrapped around irregular shapes
• Rogowski coil
• Waterproof sensor rated to IP 67
• User selectable ranges of 3, 30, 300 and 3000 Amps
• 600V CAT IV, 1000V CAT III rated
• Not effected by magnetic saturation, provides excellent linearity and low phase shift
• Battery or USB powered for long term use
• Red LED indicates overload condition
• Positive click locking sensor eliminates disconnection errors
• Banana plug termination compatible with multimeters, data loggers and other instruments